Question about 2004 Chevrolet TrailBlazer
Usually door for HVAC will act like this when there a faulty code. it is a default mode when BCM see a problem
have code retrieve
hope it helps
Posted on Mar 29, 2014
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: There is no air flow
You need part GM Part number 89018675 or ACDelco 15-73596. The Mode Selector Actuator. What happens is the part is a CHEAP part POORLY designed and when it goes to turn the flaps inside the HVAC unit its the plastic gear slips instead of turning the flap!!!
Just to forward you you might want a deal to install this art for you unless your good at fixing your own vehicle, because you need SMALL sockets and a lot of patience to get this part in!!!
The part is ALMOST directly above the steering shaft for your steering wheel, so theres a lot you got to remove before you will even see them!!!
I only recommend you to have a dealer put this part in for you, unless you have your own service manual!!
Because there is 5 of these darn things and if you pick the wrong one you will have to do it all over again!!!
3 on the Drivers side and 2 on the Passengers side!!
But replacing this part SHOULD solve all your problems!! AS it did for me and i was having the same issues as you have described!!
Posted on Jul 22, 2008
common problem, check under dash by the gas pedal if control arms are muving went selecting from ac to heat cuz this it is the control for the vents to go from ac to heat and to defrost.
Posted on Feb 23, 2009
more likely a broken door in hvac case.with car running work controls and watch actuaters operate to locate good luck maybee a little challange
Posted on Aug 30, 2009
Some thing you could look at would be this. The control is usually fed by a vacuum line or small hose thats is connected to your intake manifold.
With a cold engine,look for a skinny vacuum hose that runs from the intake toward the fire wall . It should be going inside the cab and connecting to the A/C vent control.Some times the hose becomes disconnected or splits or cracks due to heat under the hood.
Thats usually the trouble.
I hope this helps you.
Posted on Oct 06, 2009
Removal & Installation
Mode actuator location
Posted on Apr 18, 2010
Tips for a great answer:
Oct 02, 2016 | 2004 Chevrolet Chevrolet TrailBlazer LS
Oct 05, 2014 | 2004 Chevrolet TrailBlazer
Mar 29, 2014 | 2007 Mercury Grand Marquis GS Sedan
Sep 07, 2012 | 2002 Chevrolet TrailBlazer
Jun 28, 2012 | Chrysler Town & Country Cars & Trucks
Mar 09, 2011 | 2004 Chevrolet TrailBlazer
Feb 19, 2011 | 2004 Chevrolet TrailBlazer
Aug 30, 2009 | 2004 Chevrolet TrailBlazer
May 26, 2009 | 2004 Ford Expedition
88 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: