Question about 1995 Ford Mustang

1 Answer

Clutch cabler ajustment

Think plastic adjustment under dash has broken gear

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that got 5 achievements.

    Night Owl:

    An expert who has answered 10 or more questions between 12 midnight and 6am on the same day.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 47 Answers

Go to latemodel restorations and order the fire wall adjuster works really well and easy to install and a lot easier to get to to adjust the clutch on.part is not real expensive .hope this helps

Posted on Mar 30, 2014

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Ford everest 2011 3 litre4x4 dual clutch slipping in top gears clutch has only done 40000 long distance kilometers. Help


if hydraulics clutch system , replace the master cylinder ( blockage in compensating port or incorrect clutch pedal adjustment under dash
if cable clutch replace the cable or again adjust the clutch pedal for free play

Jun 10, 2016 | Ford Cars & Trucks

1 Answer

How do I adjust a 1996 Mazda 121's clutch cable please?


Hi im not familer with this model,but if it is a cable the adjustment will be where the cable gose into the gearbox bellhousing,if there is not a ajuster there then it could be that the clutch pedle has a ratchet that selth ajusts as the clutch wheres down wich means im sorry to say you will need a new clutch,best of luck I hope its the first one.

Aug 08, 2015 | Mazda Cars & Trucks

3 Answers

Hi my name is daniel, i have an 04 mazda rx8 with manual trans and the problem with my car is that when the car is ON the gears wont shift and when the car is OFF the gears do shift, what can the problem...


Manual transmission?

If so there is a problem with the clutch. If its hydraulic the slave or master cylinder may be leaking and the reservoir is probably empty. If its a cable it may be out of adjustment or broken.

Jan 12, 2011 | 2004 Mazda RX-8

1 Answer

Put a new clutch cable on my escort but no good as i can not adjust the pedal


LIFT THE CLUTCH PEDAL TO DISENGAGE THE ADJUSTING MECHANISM.THIS MUST BE DONE DURING CABLE INSTALLATION AS FAILURE TO DO SO WILL RESULT IN DAMAGE TO THE SELF ADJUSTER MECHANISM.INSERT THE CLUTCH CABLE THROUGH THE DASH PANEL AND THE DASH PANEL GROMMET.( WARNING ) BESURE THE CLUTCH CABLE IS ROUTED UNDER THE BRAKE LINES AND NOT TRAPPED AT THE SPRING TOWER BY THE BRAKE LINES IF EQUIPPED WITH POWER STEERING ROUTE THE CABLE INBOARD OF THE POWER STEERING HOSE.PUSH THE CLUTCH CABLE THROUGH THE INSULATOR ON THE STOP BRACKET AND THROUGH THE RECESS BETWEEN THE PEDAL AND THE GEAR QUADRANT.LIFT THE CLUTCH PEDAL TO RELEASE THE PAWL ROTATE THE GEAR QUADRANT FORWARD AND HOOK THE CABLE INTO THE GEAR QUADRANT.INSTALL THE CLUTCH SHIELD ON THE BRAKE PEDAL SUPPORT BRACKET.ON THE TEMPO OR TOPAZ INSTALL THE PANEL ABOVE THE CLUTCH PEDAL.USING A PIECE OF WIRE CORD OR TAPE SECURE THE PEDAL IN THE UPMOST POSITION.INSERT THE CLUTCH CABLE THROUGH THE INSULATOR AND CONNECT THE CABLE TO THE CLUTCH RELEASE LEVER IN THE ENGINE COMPARTMENT.REMOVE THE DEVICE USED TO TEMPORARILY SECURE THE PEDAL AGAINST ITS STOP.ADJUST THE CLUTCH BY DEPRESSING THE CLUTCH PEDAL SEVERAL TIMES.INSTALL THE AIR CLEANER.

May 31, 2010 | 1995 Ford Escort

2 Answers

Having trouble with my 1989 ford f-150 starting, it is a standard tranny, just changed the clutch and slave cylinder the truck started before I did this. The lights work and all the power options, but it...


There is a safety switch off of the clutch pedal so you don't start it with it in gear, and the clutch out. This is adjustable,and sounds like is your problem. Look under your dash for a small switch that is acuated by the pedal.

Aug 21, 2009 | 1989 Ford F 150

2 Answers

1986 Chevy S10 Blazer Clutch out or just need to drain and refil?


check the fluid level in the clutch resorvoir if its low fill it up and see if that helps then check for leaking fluid on back side of clutch cylinder and under dash where the clutch pedal attaches to the cylinder next to firewall

Jul 28, 2009 | 1985 Chevrolet S-10

2 Answers

Clutch release lever has no pressure clutch stays engaged. just replaced clutch and everything else


I think it has a hydraulic clutch. Look for the resivoir if empty fill with brake fluid and start looking for leaks.

Apr 24, 2009 | 1990 Geo Storm

1 Answer

Clutch slipping


A clutch is usually adjusted from underneath the car if it's a mechanical clutch.

Your comment that there is very little play at the top indicates an improperly adjusted clutch. You should have about 1/2 - 3/4 inch of play before feeling the clutch in the pedal.

Jan 24, 2009 | 2003 Nissan 350Z

1 Answer

My clutch pedal has no resistance and I can't shift gears...


If you have a hydraulic clutch, it is conceivable that the fluid has leaked out. For areas of leakage check up under the dash where the clutch master comes through the firewall., or check down at the transmission at the clutch slave, which is the small cylinder on the transmission. You should also fill the reservoir immediately as well.

If yours is the adjustable type of clutch, then you need to have it ajusted immediately

If you would like to contact me again about this or other problems, feel free to do so.
Bill
ASE Master Technician

Nov 26, 2008 | 1989 Jeep Wrangler

Not finding what you are looking for?
1995 Ford Mustang Logo

Related Topics:

52 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5501 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...