Question about 1995 Ford Mustang

1 Answer

Clutch goes to floor no pressure on it

When pushing in on clutch it as no resitness

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that got 5 achievements.

    Greenhorn:

    A rookie expert who has answered 20 questions on their first day.

    Cheetah:

    An expert who has answered 20 or more questions within one hour.

  • Contributor
  • 37 Answers

Low on clutch hydraulic fluid. Leaky or blown hydraulic clutch cyclinder. Broken throwout bearing arm.

Posted on Mar 31, 2014

  • thomas merrill
    thomas merrill Mar 31, 2014

    Low on clutch hydraulic fluid. Leaky or blown hydraulic clutch cyclinder. Broken throwout bearing arm.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1996 Mazda MX6 Clutch pedal has no push back from floor but still shifts


I am not a mazda guy but it sounds like the pressure plate is bad. Have you check the clutch linkage to be sure something did not slip or break. If so I would be looking at the clutch pressure plate.

May 18, 2017 | Mazda Cars & Trucks

1 Answer

The clutch peddle in my jetta goes all the way to the floor...come to find out I needed a new clutch cable but now that I have put the a new clutch kit and clutch cable its been workin fine for about a...


Hi it can be a few things to start with there is a fork on the gearbox end that can be broken to get to it u need to remove the round cover on the end of gearbox to inspect.if not it then gearbox must be removed and then the plate where the push rod is pushing against needs to be checked if not broken by push rod if that is ok only thing can be the pressure plate springs failed.hope this helps.regards

Jun 30, 2011 | 1996 Volkswagen Jetta

1 Answer

Clutch has no pressure when you push it in to change gears sometime you can pump it hard it will go in good then iit goes to the floor again what could be wrong


Put morw brake fluid in clutch master cylinder, pump clutch paddle, look under car for leak, if no leak replace clutch master cylinder, not holding pressure.

Jul 20, 2010 | 1988 Mitsubishi Pickup

1 Answer

Clutch pedal goes to floor no preasure filled and bled slave cyl same result


Hi:
If you have bled the system, you are down to either having a bad clutch master cylinder, or a bad clutch slave cylinder. You could eliminate the slave cylinder by removing the line and capping it off, and if you have a firm pressure on the clutch pedal ( don;'t try to push it down, just check for pressure!) then your slave cylinder is bad. If you cap off the line, and bleed the system, and the pedal still has no pressure, then your clutch master cylinder is bad!

Apr 15, 2010 | 2004 Chevrolet Cavalier

1 Answer

No pressure clutch pedal goes straight to the floor 1988 holden r


If hydraulic actuated mechanism, loss of fluid, defective master cylinder or slave cylinder at the clutch. Missing pin or other part between slave cylinder and clutch arm. Loose or broken slave cylinder mounting. Missing pin or broken part between pedal and master cylinder. If mechanical linkage, look for broken components or missing pins at moving joints. If you tried to shift into gear with engine running, you may have damaged the transmission gears.

Aug 11, 2009 | 1993 Isuzu Rodeo

1 Answer

My clutch wont engage it was working fine one day the next i had almost no resitance on my pedal


Check master for fluid level, check line going to slave unit, check slave unit (any leaks, you have found problem) If master is full, it may be internally bypassing in that case it may not leak but will not put pressure into the line. (fluid goes around piston instead of being pushed) If master is low and no obvious leak found, look under dash where clutch rod goes into the back of the master. you may find fluid there.

Apr 18, 2009 | 2001 Mitsubishi Eclipse

1 Answer

2000 cavalier clutch pedle goes to floor when pushed and stays there, clutch not working no pressure


You are going to have to replace the master and slave cylinders for the hydraulic clutch, the seals have failed in the slave, but from past experience they should always been replaced as a pair.

Oct 12, 2008 | 1998 Chevrolet Cavalier

1 Answer

Clutch pedal goes to the floor, then after pulling it up there is pressure...


There is either air in the system or a leak in the clutch slave cylinder. Check your fluid make sure it is full and the cap is tight.

Sep 18, 2008 | 1996 Pontiac Sunfire

1 Answer

I need some help


sound like you clutch release brg is out . you need to replace it along with a new clutch pressure plate and clutch disk and pilot brg. you will have to remove your trans to get at the clutch.

Aug 23, 2008 | 1992 Chevrolet C1500

Not finding what you are looking for?
1995 Ford Mustang Logo

Related Topics:

47 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75744 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

fordexpert

Level 3 Expert

5495 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...