Question about Cars & Trucks
I need to re wire the lights on my truck and need a diagram please thank you
Un due back len both sides they r colored grn/ywl. One side Brn/ywl the other side . Now go to truck plug two people needed one to work paddles and one to work the plug .u need a tester .ground it good clean scratch on bumper for ground place other end to plug pins to find what goes where and remember green ground world around
Posted on Jun 02, 2014
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
The link below is a Typical fog lamp / driving lamp hookup. Keep in mind that in most states, for these lamps to be 'legal' (and thus pass inspection), you must wire them such that:
1. You can cut them off (in other words, there must be a switch installed to turn them off)
2. They may only be operated with the low beams. (therefore, you must power your on/off switch from the low beam circuit)
Posted on Feb 28, 2009
I'm assuming you're just going to splice into the tail light wiring so that's what these wire colors are:
at the tail lamp 3 way connector:
black and yellow = park lamp
dark green and brown = left turn signal
there should be another connector with violet and black wire for reverse lights.
the stop lights are turned on through the turn signal circuits.
Posted on Apr 12, 2009
follow the three links for complete wiring diagram of lcm
Posted on Jun 30, 2009
Tips for a great answer:
Jun 16, 2016 | Cars & Trucks
Jan 05, 2016 | Suzuki Cars & Trucks
Jan 08, 2013 | Cars & Trucks
Nov 13, 2012 | 2004 Kia Sorento
Oct 28, 2012 | 1992 Ford F250
Mar 03, 2018 | Ford Transit Cars & Trucks
Jul 29, 2009 | 1999 Ford Econoline
Mar 17, 2009 | 2002 Buick Rendezvous
161 people viewed this question
Usually answered in minutes!