Question about 2003 Mazda Protege

1 Answer

Replacing headlight assembly

I have the top bolt removed from outerside and the two screws on inner side but headlight assembly still will not come out.

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 9 Answers

Check behind your turnsignal indicator light sometimes there is also one or more screws there hope this helps

Posted on Mar 31, 2014

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do you replace a driver side fender and head lamp assembly for a 2003 Chrysler Town and Country?


Google it for a specific lst of steos. Basically front bumper cover has to be removed as well as inner fender well. Then bolts from the top of fender, door jamb and behind bumper are removed. Headlight assembly in bolts from inside engine compartment. ...iirc you have to remove the air cleaner assembly to get to it. There is a YouTube video on that.

Oct 29, 2016 | Chrysler Cars & Trucks

3 Answers

How do I replace a headlight assembly on a 2007 Buick Lucerne?


ouch on this buick...
requires a little more work..
1.6 hrs with headlamp alignment.
replace-headlight-assembly-2007-buick#solution-section-eiq04jcqehklpmop1towry5q-4-9.jpg
replace-headlight-assembly-2007-buick#solution-section-eiq04jcqehklpmop1towry5q-4-20.jpg

Nov 12, 2014 | 2007 Buick Lucerne

1 Answer

How too remoove driver side fender 2005 envoy


once you have removed the headlight assembly and remove the bolt behind the headlight assembly, continue locating the 10mm bolts attaching the fender along the top side, along the bottom in front and behind of the tire, open the drivers side front door, look into the opening between the door hinges and with a flashlight and a long extension on your ratchet you will then remove the two bolts between the fender and door, one on top and one at the bottom. you also have to remove the retaining bolts that attach the inner fender liner to the fender.

Jul 06, 2014 | 2005 GMC Envoy Xl

1 Answer

How to replace the ecu on a lexus 300es


very simple remove the front radiator sheild it should have 6 plastic clips on it. if you dont know wat that is its the big black plastic cover right when u pop the hood. u will see a 10mm bolt on the top of the headlamp assembly remove that bolt you will also see a screw on the other side on top of the parking lamp assembly remove the srew after the screw is removed u will b able to slide out the parking assembly after that has been removed u will see one more 10mm bolt holding the headlight assembly in place remove that and the headlight assembly will slide out after it is out unplug the 3 electrical connectors from the back of the assembly remove the assembly. if u flip it over their will be four screws on the bottom of the assembly remove the four screw and take the plastic plate off u will see a steal box that is ur headlight CM remove the two electrical connectors off the box one of them goes to the headlight twist off the headlight waterproof cap and un plug.. should take you no more than 30mins

Mar 30, 2012 | 2001 Lexus ES 300

1 Answer

How do you change the head light on a 97 honda odyssey?


you want to change the headlight bulb, or the whole headlight assembly? The bulb is easy. There is a round rubber boot, about 3 inches in diameter, on the backside of the headlight assembly under the hood. Behind the rubber boot is the headlamp , secured by a wire clip that holds it secure in place. You pop that wire clip open. Its sort of triangle shaped and clips on to the headlight Assembly. The clip doesn't normally come , just unclip it, and the headlamp will then pull out. Unplug it from the plug by pushing on the release tab. Take the lamp to the auto parts store and buy a replacement. Install in reverse procedure, but make sure not to touch the glass on the bulb. These bulbs get very hot and even slight oil from your finger tips can cause the glass on the bulb to burst. The one on the passenger side is harder to get to because of the battery location. The easiest way to change bulbs is usually to ask the person at the auto parts store to do it for you. Many times Auto Zone and Advance Auto stores will put them in for you.

The headlight assembly is a different story. That is the whole plastic headlight and side marker light that must come out. There are 2 ) 6mm bolts ( 10 mm head) located at the top of the headlamp , sticking in the radiator core support. That's the big piece of metal that goes from inner fender to inner fender which the radiator attaches too. Then there are 2 more bolts on the bottom of the headlamp assembly that bolt to tabs on either side. For the side marker light there are 2 screws in the backside of them against the fender, and a bolt on the bottom. You have to pull the plastic cover inside the wheel well. Might be easiest to pull the tire to get more room. There might be another bolt or screw in there, not sure as its been a while since Ive replaced them. If you replace a headlight assembly, they will cost you around $100 used at a salvage yard or e bay. The side marker lights you can get new for under $40 all over the internet. Hope this helps some

Feb 23, 2011 | 1997 Honda Odyssey

1 Answer

Replace low beam drivers side headlight on 1993 olds cutlass supreme convertible


Remove turn signal assembly (uses a torx 15 driver). This will expose the two 10mm bolts on the one side of the headlight assembly. Remove the plastic front grill (uses a torx 15 driver - there are about 6 screws). This will expose the other two 10mm bolts on the headlight assembly. Remove the four 10mm bolts to remove the headlight assembly and this will allow you access to the headlight you need to replace.

Feb 18, 2011 | 1993 Oldsmobile Cutlass Supreme

1 Answer

Remove headlight assembly from a 2001 Dodge Ram


On the upper grill side of the headlight assy. there
should be 1 or 2 push pins that hold the seal on the
headlight assy to the front of the fender. Also check
for a guide/push pin on the inner top of the assy on
the outer fender side. That should be all there is to
hold the headlight in place. Hope this helps.

Apr 10, 2010 | 2004 Dodge Ram 1500

1 Answer

HOW DO YOU REMOVE THE HEADLIGHT ASSY TO REPLACE THE TURN SIGNAL BULB


SECTION 417-01: Exterior Lighting 2001 Escape Workshop Manual REMOVAL AND INSTALLATION Side Lamp/Front Turn Signal Lamp Bulb Removal and Installation
  1. Remove the wheel and tire. For additional information, refer to Section 204-04 .
  1. Position the inner fender well aside.
    1. Remove the bolts.
    1. Remove the pin-type retainers.
    1. Remove the screw.
    1. Position the inner fender well aside.
  2. Remove the lamp socket from the lamp assembly.
  3. Remove the bulb.

06a0ca1.gif

Dec 01, 2009 | 2001 Ford Escape

1 Answer

How do I replace the headlight assembly on a 2006 sebring?


  1. Remove the front bumper cover
  2. Remove the upper headlight housing mounting bolt and pushpin
  3. Remove the lower headlight housing mounting bolts
  4. Pull out the headlight housing assembly and disconnect the electrical connector.
Its pretty easy. Just raise the hood, see the two silver 8mm cap screws on top of the cross member that supports the radiator and fan assembly. Two screws on each side above the headlight housings. The outer screw is right next to the corner of the fender when the hood is raised. Remove the two screws, then the headlight assembly is loose. Just gently pull the headlight assembly forward enought to see the three lamp socket holders on the back side of the headlight assembly. From the outside corner to the inside are first, the parking turn signal, then the low beam lamp and finally the last, the high beam lamp. To remove the lamp socket, push the small plastic locking tab and turn the socket assemby counter clockwise about a half turn and remove the lamp. Now you can replace the lamp and install it back the same way you took it out. Don't touch the new lamp glass with your bare fingers. Oil from you skin will absorb into the glass causing the glass to turn dark and shorten the lamp life. 

May 04, 2009 | 2006 Chrysler Sebring

1 Answer

How to change a marker light bulb


to change the turn signal bulb on the headlight there is usually either a screw or tab that releases parking light lense from headlight. to just completely remove the headlight there are the two screws up top and also two lower if we are taking about the right side(drivers side, standing in front of vehicle) one of the screw is to the right side down near the inner fender, it is even with the bottom of the headlight. the other screw can be seen between the headlight and the radiator support about in the same area just opposite the other side. take a flashlight with you, not too hard to see

May 03, 2009 | 2003 BMW 325

Not finding what you are looking for?
2003 Mazda Protege Logo

81 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

76673 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8531 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...