Question about 1994 Chevrolet S-10

1 Answer

I have a 1994 chevy s10 its making tapping noise in the timing chain cover

While idling it be tapping in the timing chain cover,every once awhile the noise stops

Posted by on

1 Answer

Have to remove the front timing cover
& replace the gears & chain set on a V6

On a 4 cyl you may only have to do the chain &
tensioners

Need a manual for torque specs & anything you
don't understand

Posted on Mar 30, 2014

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What would cause you to lose fuel pressure while driving.


Chevrolet S-10 Questions - Fuel System Loses Pressure ...

www.cargurus.com > Questions > Chevrolet > S-10

CarGurusJul 28, 2012 - Fuel System Loses Pressure - I have a 2003 Chevy S-10 Pick Up with the 4 ... car a few times, what essentially you are doing is priming the fuel pressure. ... A dirty fuel filter will not cause the lines to lose pressure after the engine is shut off. ... I have a 98 s10 2.2 liter and it was driving fine all day then when ...

Chevrolet S-10 Questions - My 2001 S10 has a hard starting ...

www.cargurus.com > Questions > Chevrolet > S-10

CarGurusSep 16, 2012 - My 2001 S10 has a hard starting problem if the truck sits between 1 ... Vacuum leak, have you checked fuel pressure while it sits? ... Would the spider alsocause a misfire at low rpms? .... at an idle, or squeaking while driving and it gets faster as you go? ..... 1994 Chevrolet S-10 2 Dr STD Standard Cab LB.

Chevy S-10 Won't Start - Repalced Fuel Pump and Pressure ...

www.cartruckinfo.com/chevy-s10-wont-start.html
Chevrolet S-10 pickup won't run and has no fire unless I jumper the fuel pump relay. ... Once the truck starts and is running you can remove the jumper to the fuel pump ... Iwould get the fuel pressure checked to start with, because that's where the ... 93 gmc 4.3l FI runs but dies out loss of power after 5 mins of running then ...

Stalling S10: I Have a 1994 Chevy S10 2.2l It Stalls After 35 ...


Dec 10, 2015 | 1994 Chevrolet S-10

1 Answer

Timing chain


you have probably knocked somewires loose like cam sensor or crank sensor re check all your wiring near where you did all the work..

Apr 03, 2014 | 1994 Chevrolet Camaro

1 Answer

Loud clicking noise coming from crankshaft pulley and goes away when a/c is on and when idle is higher. Why the noise?


Take a dry bar of soap and touch it against the sides of the belt(s) while the engine is running. If the noise goes away for a little while, the noise is from the belt settling into the grove of the pulley. Belts can really make loud pooping noises.

If this has no effect, then your timing chain may be too loose for the timing chain tensioner to compensate, and the chain is slapping against the inside of the timing chain cover.

If this is the case, do not let this condition go on. The timing chain cover is aluminum, and the chain is high grade steel. The chain will wear a hole in the cover if it is hitting the inside of it, and that is allowed to continue.

Jun 26, 2010 | 1994 Toyota Camry

1 Answer

2000 suzuki esteem gl with 1.8 liter dohc I dont whether to describe it as a tap or a knock,but i seem to hear it after i've been driving on the highway for awhile,but only hear it when idling or at a...


Have you ever had your timing chain replaced? If not, then most likely your timing chain is getting loose and starting to tap on the sides of the housing. This is normal after probably 110-130000 miles, so you may consider this. DOHC engines don't have the lifter tapping problems that pushrod engines have. The reason you only year the timing chain tap at idle and when warm, is the metal expands when it warms up, making the chain slightly longer. At idle, chains and belts "flutter," or shake back and forth. when the engine speeds up, it puts more tension on the chain and it stops.

Oct 22, 2009 | 1999 Suzuki Grand Vitara

1 Answer

1994 s10 service engine soon light


Have you had the truck scanned for codes? If so, what was the code, codes? Why did you replaced those listed parts. Can you hear any hissing noise coming from the engine or engine compartment?

Sep 04, 2008 | 1994 Chevrolet S-10

Not finding what you are looking for?
1994 Chevrolet S-10 Logo

133 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8210 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...