Question about 2000 Ford Expedition

1 Answer

1999 chevy calavier 2.2 stalls enter samecode

Changed all sencers still atalls when you put the car in drive or reverse.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Ford Master
  • 3,854 Answers

Check the air idle control valve, it may not be working or dirty with carbon build up. Check the wire harness to the valve and try cleaning it with throttle body cleaner, do not use carb cleaner. You might get away with just spraying a Can of throttle body cleaner through the throttle body, follow the instruction on the can and use the whole can. After your done, turn the engine off and place the ignition key to the run position for 30 seconds then turn it to the off position for 10 seconds. Start the car and let idle for 1 min before going for a test drive, that will reset the base line for the air idle control valve. Good luck and hope this helps, If the problem still there then the air idle control valve needs to be replaced.

Posted on Jun 15, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1999 ford explorer v6 4.0 stalls in drive and reverse


Check for moisture at the PRNDL switch on the side of the trans.

Apr 21, 2013 | 1999 Ford Explorer

1 Answer

1999 Ford Explorer, sluggish or stalls in Drive


Check the speed sensor on the power steering and replace if it fails to increase engine speed when the wheel is turned.

Nov 28, 2017 | 1999 Ford Explorer

1 Answer

I have a 94 chevy lumina it idles high in park and when i put it in gear it stalls i have replaced (one of the o2 sencers, egr vaule, map sencer, trottle sencer, and another sencer but not sure what it is....


throttle position sensor can cause the high idle as will a hole in the egr valve tube as far as stalling as soon as u put in to gear could be torque converter not unlocking but id check the egr tube first

Jun 07, 2011 | Chevrolet Chevy Cars & Trucks

1 Answer

Abs light stays on and traction control stays off in my chevy impala ls the transmission is acting up in drive i took out a fuse called [trans sol] now it drives but acts up in reverse


abs, traction control, tire pressure monitor and fuel economy indicators all use a speed sencer in the wheel hubs, save yourself a lot of greaf and have a mechanic do a code read and test the sencers, i had the same issue and it messes up the whole system, i ended up replacing one hub assembly for about $190,
as for your transmission acting up, put the fuse back in and change the fluid, DO NOT HAVE THE TRANNY FLUSHED, JUST A FLUID CHANGE!!! if you want to drive another day. todays tranmissions are way more complex than they need to be and have many solinoids and sencers that can and do fail, good luck.

Feb 24, 2010 | 2000 Chevrolet Impala

1 Answer

Car wants to stall changed injecter,egr valve iac


hi
check the all vacuum pipes is their any leaks.

Feb 21, 2010 | 1994 Saturn Sl

1 Answer

When put into drive the car shakes and stalls. It


I have a 1989 5-series BMW which sometimes stalls after changing from reverse to drive. It also sometimes shakes when first driving in reverse before changing to drive.

Jan 30, 2010 | 1992 Mazda Protege

4 Answers

I HAVE NO OVERDRIVE OR DRIVE WHAT CAN DO TO


FIRST CHECK TRANNY FLUID LEVEL. IF ALL GOOD. HAVE IT SCAN CHECK 1 -2 AND 3 - 4 SHIFT VALVE SOLENOIDS.TO SEE IF THEY WORKING OR FUSES BLOWN.

Aug 29, 2009 | 1999 Chevrolet Silverado 1500

1 Answer

My 1998 chevy cavalier is having trouble going into gear. i can go in reverse and sometimes it won't shift into drive and car won't move, then it will act fine at times. it is an automatic and have checked...


let it warm up for 10 minutes before you put it into drive if it goes rite in then you need to change the transmition filter in it i had 2 chevys do that it will go rite int reverse gear but wont go into drive rite away after the engine runs for a while it shuld go into drive

Sep 23, 2008 | 1999 Chevrolet Cavalier

Not finding what you are looking for?
2000 Ford Expedition Logo

90 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76848 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

fordexpert

Level 3 Expert

5546 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...