Question about 2006 Nissan 350Z Coupe

1 Answer

Need directions to replace clutch plate

We have the clutch plate kit and need directions on how to replace it.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Nissan Master
  • 3,679 Answers

Probably easiest if you get a workshop manual for your vehicle as will have step by step instructions

Posted on Mar 29, 2014

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My clutch plate is going out what are all the parts needed to get to replace this


Usually the pressure plate, clutch disc, throw out bearing, and pilot bearing are what is replaced. Usually a clutch kit from auto parts stores include all of this in the same box.

Jan 26, 2017 | Cars & Trucks

1 Answer

Replacement clutch is too small? Thought there was only one engine in 2000 hyundai accent, the 1.5L. Title says its been rebuilt twice. How do I find out what clutch i need to ask for?


the different clutch sizes are for the different capacity engines
The 7" would be most likely be for the 1.4 or 1.6 version engines where the 8" would be for the for the 2.0 or 2.4l engines
If the flywheel is flat across the face ( not recessed) the the clutch plate you want will fit as long as the pressure plate is the same diameter and the bolts fit the cover to the flywheel
it is possible to get a standard clutch kit or a heavy duty clutch kit which has a higher pressure plate reading to cope with heavier loads ( towing etc)
if an 8" came out , you need to replace it with an 8"
The bigger the clutch , the longer the period before replacing it
If you can get to it you can measure the shiny wear patterns on the flywheel and if the incorrect plate was fitted at some time you will see the old wear pattern outside the latest shiny surface
what you have to be aware of is the spline number and size of the new clutch plate so try it on the input shaft before fitting to the flywheel

Jan 24, 2016 | 2000 Hyundai Accent

1 Answer

When I let clutch out when cars in gear the car wont pull away if I turn engine off let it sit fr an hr then drive it its fine fr a while.


For awhile? How long? And then it slips again? I think you need a new clutch, your clutch disc must be worn. A new clutch kit includes a new clutch disc or plate, a new or rebuilt clutch pressure plate, and a new release bearing. Costs about $150-200,for the kit, but you also need the flywheel surface smoothed at a machine shop or garage, then the labor cost of removing the transmission or transaxle to replace the clutch- it all adds up to an expensive job.

Apr 09, 2015 | Cars & Trucks

2 Answers

Hyundai. Tucson, 59 plate' clutch slips at high speed when changing gear


check /replace clutch cable or replace master cylinder. If the clutch has not been replaced it may need a clutch kit as the indications are that the pressure plate is weak ( worn clutch plate or from overheated clutch)

Feb 10, 2015 | Hyundai Tucson Cars & Trucks

1 Answer

1986 isuzu trooper clutch pedal went soft


some of these were manual clutch cable check adjustment of cable at firewall (bulkhead) and check for cracks around where cable goes through to inside cab common on old girls.
if hydraulic clutch system
check fluid in clutch master cylinder is it low?
it could have leaking slave cylinder on gear box bell housing or your clutch needs replacing, gear box out and replace clutch as a kit, pressure plate, clutch plate, thrust bearing (comes as kit) but dont forget to check and or replace the spigot bearing in the rear of the crank shaft when doing clutch kit.

Apr 01, 2014 | 1986 Isuzu Trooper

1 Answer

How do you replace a clutch plate?


G'day jonathan, I just Googled 'How do you replace a clutch plate' and got this http://goo.gl/EwTvGQ Stay safe Greg.

Mar 29, 2014 | 2006 Nissan 350Z Coupe

1 Answer

Engine speed increases with no increase to vehicle speed


If your car has a manual gear box thn the clutch plate may need replacing, if need be better to replace the pro-kit i.e clutch pressure plate , clutch plate and the relaese bearing.

Sep 21, 2010 | 1996 Volkswagen Jetta

1 Answer

5 speed hard time shifting and it has a new clutch.


Replacing the clutch plate only sometimes doesn't help you should have replaced the clutch pressure plate too, best is to fit the clutch pro-kit (clutch plate, clutch pressure plate and release bearing).
I guess now you will have to just replace the clutch pressure plate and the release bearing.

Nov 23, 2009 | 2000 Kia Sportage

3 Answers

Clutch is noisy,when i depress the clutch the noise goes away


this noise is caused by a noisy clutch throw-out/release bearing, that is the part that presses against the pressure plate and disengages the clutch disk, the transmission must be removed to replace this part, so it is best to replace the clutch assembly at the same time, the labor for both is the same, about 5 hours

Oct 23, 2009 | 2003 Toyota MR2 Spyder

1 Answer

Clutch is out


hi, yes the clucth kit will contain the clutch and the pressure plate that holds the clutch onto the fly wheel and the kit also contains the thrust bearing. so the clutch kit will contain all you need.

One thing to make sure you do is clean the pressure plate as the metal surface that touches the clutch will have an oily liquid on it to prevent it from rusting when its on the shelf so clean this with a brake cleaner or other alcohol based cleaner as the plate needs to be free from grease and perfectly clean.

Hope this is some help to you any problems or questions just give me a shout back ok

May 20, 2008 | 1992 Daihatsu Rocky

Not finding what you are looking for?
2006 Nissan 350Z Coupe Logo

Related Topics:

78 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

723 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...