Question about 2005 Chevrolet Equinox
No one seems to know what is causing this noise
Check your shields if had any brake work done or check control arms and tie rods ,even tires
Posted on Apr 12, 2014
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: knocking noise in the engine.
Knocking Noise Is NOT a Good or Normal thing I will Not try and Diagnose it But I STRONGLY Suggest That You Stop By A Couple Service Shops For a EAR ON Check for this KNOCK and
I say A Couple Shops Meaning 3-4 So as to get The right Diagnosis
Posted on Jan 23, 2009
Hello, I see you have a trailblaber with a knocking noise. It sounds like you have an electric fan clutch issue. Believe it or not your vehicle has an electric fan clutch. It looks just like the older non-electric but if you look on the driver side of the fan shroud that is the wire connector you see. It is an exspensive part just for the clutch but thats exactly what you are describing. It doesn't get louder just fast with rpms. Please rate my answer, Thank you
Posted on Mar 06, 2009
What you are describing sounds like you have an engine bearing failing. Do not drive it 'till you have it diagnosed and repaired (most times though it's too late when you hear it.)..... Outside chance it could be the trans flex plate but I doubt it.
Posted on Apr 22, 2009
Did they replace the knock sensor?Check the wire going to the sensor(knock).Look for a bare place hiting up against something ,grounding it out.Make sure the plug to knock sensor is good.And make sure it is making a good connection,Knock sensors also ground a part of the computer to feed back imformation.This connection is a must,the truck will not perform at all,stumble,miss,and carry on.Sometimes even backfire.If they did not replace the knock sensor,replace it with high quality sensor from NAPA,or oem from dealer.This sensor has to be made perfect,no room for inperfection.The knock sensor is easy to replace,they just screw in a hole in the block.When removing the sensors,nothing will come out such as oil or water,this is a dry threaded hole.It is a bell shaped sensor.If you don`t know which sensor is bad,purchase one.replace one,and if there is no change,replace the other side with the old sensor you just took out,it will be a good one.I hope this helps you,Let us know if it does.
Posted on Oct 05, 2009
Tips for a great answer:
Feb 02, 2014 | 2008 GMC Yukon XL
Dec 11, 2013 | Cars & Trucks
Dec 11, 2013 | Cars & Trucks
Mar 04, 2011 | 1996 Toyota Tercel
Feb 10, 2011 | 1995 Ford Windstar
Apr 19, 2010 | 2002 BMW 3 Series
271 people viewed this question
Usually answered in minutes!