Question about 2000 Dodge Dakota Quad Cab

1 Answer

ECM wiring I have the 3.9l w/ a 5spd manual trans that I have converted to the 5.9l. I have searched everywhere for a computer that will work, with no success. I now have made the decision to build a wiring harness that will work, but need to know what plugs go to what features on the ecm.

Posted by on

  • Jason Henderson Mar 30, 2014

    Try google images, think I saw some wiring diagrams with pin functions there.

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Dodge Master
  • 5,324 Answers

You should have purchased the ECM and wiring harness with your donor engine. Without the stock parts, your best bet is to purchase an after market stand alone control system and harness. I know this is not what you want to hear, but you must either have the correct computer, or go the after market route.

Posted on Dec 15, 2014

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 40 Answers

SOURCE: TRUCK NOT CHARGING

regulator on alternator is bad

Posted on Jun 19, 2009

  • 76 Answers

SOURCE: 1993 DODGE DAKOTA V8-318 5.2L EVERY 3 TO 5 DAYS

possible you ignition switch

Posted on Aug 16, 2009

  • 52 Answers

SOURCE: 02 dodgeram 2500 4x4 manual

the Cummins ECM communicates to a dodge VECM thats what codes you have. Cummins should not send any voltage over 5vdc to ANY sensor. If all wiring and sensors are good the Cummins ECM may have a bad driver. Only a Cummins ENSITE trouble shooting tech can narrow this down for sure. Sorry to tell ya!!

Posted on Dec 01, 2009

  • 1 Answer

SOURCE: wiring diagram for the ecm

Im idling at the light in my 2000 Dakota R/T and all of a sudden my check engine light comes on and the engine develops a miss and starts to smoke. Diag code says misfire in #5 cyl and there is a rich raw fuel smell from exhaust. I have 175K trouble free miles and have checked compression which reveals worn but good piston rings.I replaced head gaskets and of course still exists. When I got a hand to crank while I checked voltage at each injector, #5 showed higher than the rest at all times without dropping to zero, so i'm replacing the ECM which controls signals to injectors. Oh yeah I replaced #5 injector before voltage check to no avail. Tell me if you think Im on the right track replacing ECM.

Posted on Oct 16, 2010

traceylewis1
  • 363 Answers

SOURCE: dodge 2007 ram 1500 5.7v8 ....need wiring diagrams

autozone or O'relly's carries books Chiltion or Haynes in the back of the book it has electrial diagrams it is NOT in color, However it labels the wires and states each color.

Posted on Dec 06, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have 2 94 4runners. One is 2WD 3.0 a/t,bad motor, the other is 4wd 3.0 5spd, wrecked. I want to put motor, trans, axles, running gear, from 4wd to 2wd. Wondering @ wiring, clutch linkage, etc. thx.


If there is no frame damage to the wrecked truck you could just switch the body from the 2WD onto the 4x4, as long as the cab and bed sizes are the same. the frames on both versions are the same, the computers are not the same, the one for the automatic is different from the 5 speed. To me this way is a lot less work, your just switching bodies.

Sep 30, 2017 | Toyota 4Runner Cars & Trucks

Tip

General Motors gear ratios hide] 1 GM Rear Wheel Drive...


General Motors gear ratios
hide]

GM Rear Wheel Drive Transmissions

PTU = Power Transfer Unit (Crossover SUV AWD/4WD)

6 Speed Automatic Transmissions

RPO Trans Name 1st 2nd 3rd
MNK Allison 1000
MNZ Allison 1000
MW7 Allison 1000
MYB
MYC

5 Speed Automatic Transmissions

RPO Trans Name 1st 2nd 3rd
M74 Allison 1000
M22 5L50-E
M82 5L40-E
MTW Allison 2400
MX4 Allison 2000
MX5 5L40-E with PTU*
MV3 5L50-E with PTU*

4 Speed Automatic Transmissions

RPO Trans Name 1st 2nd 3rd
M30 4L60-E
M32 4L60-E HD
M32 4L65-E
M33 4L60-E Hybrid
M41 4L30-E
M70 4L70-E Super Duty
M99 2ML70 2-mode Hybrid*
MD8
ML4 4L30-E
MN8 4L80-E HD
MN8 4L85-E
MT1 4L80-E
MW9 HM 200-4R
  • EVT Mode 1 The 2ML70 can operate in electric mode or non-electric mode in first gear with a gear ratio of infinity to 1.70:1.
  • EVT Mode 2 The 2ML70 operates in non-electric mode with a gear ratio of 1.70 - 0.738:1

3 Speed Automatic Transmissions

RPO Trans Name 1st 2nd 3rd
M40
M41
M65
MD2
MD3 HM-180
HM-200C
HM-350
HM-400

GM Front Wheel Drive Transaxles

6 Speed Automatic Transaxles

RPO Trans Name 1st 2nd 3rd
MH2
MH4
MH6 6T75 (AWD)
MH7
MH8
MY9 6T75 (AWD)

5 Speed Automatic Transaxles

RPO Trans Name 1st 2nd 3rd
Aisin-AW 55-51LE
M09 Aisin-AW AF33-5
M43 Aisin-AW AF23-5
M45 Aisin-AW AF33-5
M98 AF33-5
MJ7 Honda 5AT
MJ8 Honda 5AT w/PTU*
MLS Aisin 50-40E
MU3 Saab 76.5mm

4 Speed Automatic Transaxles

RPO Trans Name 1st 2nd 3rd
MLQ Aisin 81-40LE
Aisin ZF 4HP 16
HM 325-4L
Jatco JF405-E
M10 Jatco JF403-E
M13 4T60-E HD
M13 4T60-E
M15 4T65E
M45 Aisin-AW AF33
M57 A245-E
M76 4T65E with PTU*
MD7 4T65E
ME7 4T45-E BAS Hybrid
ME8
ME9
MH1 4T80-E
MN3 4T65E
MN4 4T40/45-E
MN5 4T45-E
MN7 4T65E HD
MS7 A240-E
MU4 A246-E
MU5 U341-F

3 Speed Automatic Transaxles

RPO Trans Name 1st 2nd 3rd
M60 GEO Metro
MB3 A131L
MD9
MX1 A131L
GEO Storm
HM-425

GM Manual Transmissions

6 Speed Manual Transmissions

RPO Trans Name 1st 2nd 3rd
M10 Tremec 85mm
M12 Tremec T56
ML6 ZF S6-650
ML9 ZF S6-40
MM6 Tremec T56
MV1 Aisin 85mm
MV5 Aisin D173 AY6
MV6 Aisin 85mm
MZ6 Tremec 85mm

5 Speed Manual Transmissions

RPO Trans Name 1st 2nd 3rd
M35 Getrag 260
M35 Getrag 260 (2003-2004 Cadillac CTS)
M49 BW 5spd
M50
M59 GEO Tracker
M86 Getrag F23 75mm
M94 Getrag F23
M96 Tremec 109mm
MA5 Aisin AR5 82mm
MG3 Getrag F23
MG5
M50
M51
MH3 Tremec T-5
MK5 C59
ML2 Tremec T-5
ML3 Tremec T-5
MT8
MU3 Saab F25
MW2
MW3 NV4500 109mm
TR-3450
TR-4050
TR-4050
2007 Chevrolet Optra and Spark (Trans code Y4A)
2007 Chevrolet Optra and Spark (Trans code Y4M)

4 Speed Manual Transmissions

RPO Trans Name 1st 2nd 3rd
M20 HM-117
M73 Isuzu
MC0 Getrag
MC9
MY6 NP260

More GM Manual Transmissions

6 Speed Manual Transaxles

RPO Trans Name 1st 2nd 3rd
MT2 Opel F40 83mm
MU9 Opel F40 83mm
MTN Toyota C60

5 Speed Manual Transaxles

RPO Trans Name 1st 2nd 3rd
D-16 (2005-2008 Chevrolet Aveo 1.4 DOHC / 1.5L)
D-16 (2005-2008 Chevrolet Aveo 1.4 SOHC)
Y4A (2007 Pontiac Matiz)
YM4 (2005-2007 Chevrolet Aveo)
D-20 (2005-2007 Chevrolet Epica)
L73 Pontiac LeMans F16
M42 Geo Metro
M43 AF23
M49 BW 5spd
M58 Geo Metro
M79 LeMans F13
M86 Getrag F23 (5T45MI)
M94 Getrag F23
M98 Aisin 55-51E
MB4 Geo Prizm 1.8L
MB5 Geo Prizm
MFB 2008 Chevrolet Epica 5-Speed S/R (D24)
MFN 2008 Chevrolet Epica 5-Speed S/R (D33)
MG1 HM-282
MG2 HM-282
MG3 Getrag F23
MJ1 Isuzu
MK7 Isuzu
MLM Y4M (2008 Chevrolet Aveo 1.6 DOHC)
MR3 Isuzu
MU3 Saab F25
MV2 Chevrolet Sprint
MY7 Early J-car

GM Continuously Variable Transaxles

RPO Trans Name Lowest Highest
M83 V20-E
M75 V25-E
M16 V25-E AWD

on Apr 15, 2015 | GMC Cars & Trucks

1 Answer

I have a 2003 vw new bettle the convertible top does not work by the motor.What do I check for?


you need to trade car it will always be trouble. pcm/ecm is for a automatic trans and though it works it is not right and will always have engine light on due to trans sensors no longer present. the top problem can get expensive just to diag. the system can take hours even days with the vw scan tools, with out the scanner its very hard to repair because of how system works.

Jul 15, 2012 | 2003 Volkswagen New Beetle Convertible

1 Answer

Will the same engine and trans. fit a different year?


No, only a 1994-1995 engine will work.

Jun 10, 2010 | 1995 GMC Sonoma

1 Answer

95 gmc sierra k1500 4x4 5spd manual noise


the leak is probably a separate issue from the noise. is the leak very bad? can you tell if it's engine oil or transmission lube/fluid? most likely the rear main bearing seal needs replacing. the noise is most likely the clutch release bearing. you should replace all components of the clutch assembly which include; clutch plate, pressure plate, release bearing and piolot bearing. also have the fly wheel resurfaced. while the trans is out, you can check the rear main seal and the trans input shaft seal and replace accordingly.

May 03, 2010 | 1993 GMC Sierra K1500

2 Answers

Oil for trans in a 1990 ford


Manual, Auto??? what do you want to know???

Jan 01, 2010 | 1990 Ford F150

1 Answer

I have a 1992 S-10 swapped from 5 speed manual to automatic


the 2 wires work your backup lights you still have to get power to your lockup converter possible ecm replacement and wiring diagram needed??

Aug 25, 2009 | 1992 Chevrolet S-10

2 Answers

My chevy impala has a torqe converter that is stuck on conveter what would i need to do to try to fix it myserlf?


Get it to the local AAMCO. they are experts on transmissions.

You would need transmission tools and a transmission dolly, also possibly need to lift the engine too...

May 24, 2009 | Chevrolet Impala Cars & Trucks

1 Answer

Need an ecu wiring diagram pinout for a 2000 nissan altima SE 5spd


what is the car doing?? by you saing "need a ECM diagram?" what is the problem with the car. that car is pretty bulletproof and I have't seen any ECM issues unless your A/C drain is clogged up and water leaked onto/into your ECM frying it up. Let me know what your symptoms are.

Jul 29, 2008 | 2002 Nissan Altima

1 Answer

Toyota ep71 starlet 1988 - 5spd manual trans


The Corolla gearbox has a longer tailshaft than the Starlet and the gearstick is in a different place, you may be able to fit with a modified driveshaft and a new hole in the floor , the starlet 5 speeds were a little fragile and prone to doing bearings. I would recommend rebuilding the one you have as it will probably be less hassle and cheaper.

Jul 08, 2008 | 1984 Toyota Starlet

Not finding what you are looking for?
2000 Dodge Dakota Quad Cab Logo

Related Topics:

82 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6918 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...