Question about 1999 Toyota Camry

2 Answers

I have a 1999 Toyota Camry (4 Cyl). It comes up

I have a 1999 Toyota Camry (4 Cyl). It comes up to temperature relatively quickly and runs fine while driving. While stopped, the temperature will gradually increase coming close to the red area. I was thinking it might be the temperature sensor for the fan motors as they have not been running, but last evening I grabbed both radiator hoses... Upper one was hot, lower one with the thermostat is cold. Now I'm thinking it may be the actual thermostat. Anything else I might be over looking?
I do understand there will be some fluctuation in temperature as a result of stopping and starting and airflow over engine.

Posted by on

Ad

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 318 Answers

The sensor for the fans is in the rad at the bottom. T-stat may be bad or the rad may be clogged. Cooling system needs attention.

Posted on Jun 22, 2009

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

I have a similar problems, I have a new water pump, radiator,because the unstable temperature issues,
I removed the thermostat and alter the radiator fan on when the engine starts.
SO the temperature gauge always shows up to 20% of the dashboard gauge.But today when I drive it
about 20 minutes, the temperature gauge suddently gone up nearly to red, So I stop the car
and check the engine seems not as hot as usaul, 10-15 minutes later I try to start the car
the gauge back to 10% of gauge, what would it be? any suggession?

Posted on Sep 08, 2012

  • kelvin Oct 14, 2012

    Finally I change the temperature sensor and the fuel pump and fuel filter, all the issue are fixed.

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Where is crank position sensor on a 1994 toyota 2.2liter 4cyl ?


Where is the crank position sensor on a 95 Toyota celica gt 2.2

search.aibing.cc/Where+is+the+crank+position+sensor+on+a+95+Toyota...
P1335, No Crankshaft Position Sensor Signal - Engine Running. ... 91 1991 ToyotaCelica GTS Engine Mount Right 2.2L 4 Cyl Genuine. ... 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001 . ... Powered by a 2.2-liter engine, the Celica now had ST and GT trim models. ... in 1986 and a 2.0-liter ...

Where is crank position sensor on a 1994 toyota 2.2liter 4cyl ...

www.fixya.com/cars/t26080657-crank_position_sensor_1994_toyota
31 mins ago - It is not behind pully nor in dist all videos show - Toyota Cars & Trucks question. ... Change a crankshaft position sensor on a 2000 eclipse.

toyota camry crankshaft sensor - ABMforum.com

abmforum.com/toyota-camry-crankshaft-sensor.html
toyota camry crankshaft sensor 99 camry crankshaftcamshaft position codes i got a problem with my 97 ... The car 96 toyota camry 2.2 liter 4 cyl. ... 1994 toyota camry 2.2L 257k miles Symptoms Car overheats Top radiator hose hot bottom cold ...

Toyota Camry 5SFE Engine Timing Belt, Water Pump and ...

hubpages.com > Autos > Do It Yourself Auto Repair
Jul 10, 2014 - The Toyota 5SFE motor is a four-cylinder, 2.2 liter, timing-belt-driven, double ..... Remove the lower timing belt cover with the crankshaft position sensor. ..... I've never, ever replaced the harmonic balancer on a 4cyl 5SFE.

1995 Toyota Camry LE 4 cylinder - YouTube

? 2:27
https://www.youtube.com/watch?v=7TW6hlUiHWQ
Sep 6, 2011 - Uploaded by jacasan2000

Feb 03, 2016 | Toyota Cars & Trucks

1 Answer

What is the cylinder order for a 4 cylinder toyota camry


It is 1-3-4-2 with No 1 being at the timing belt and crank pulley end.

Jun 09, 2014 | 2001 Toyota Camry

1 Answer

Knock Sensor


Hi. its somewhere under the intake manifold. quite painful to access.

Feb 04, 2014 | 1999 Toyota Camry

1 Answer

Engine Cooling problem 1991 Toyota Camry 4 cyl


The cooling fan is controlled by a temp switch in the bottom of the radiator, try6 replacing this switch.

Apr 03, 2017 | 1991 Toyota Camry

1 Answer

I have a 1994 manual 4 door camry. it's running


look for vacuum leaks under the hood, or disconnected sensors, etc.

Do you have any engine codes on this vehicle?

Is it a 4 cyl. or 6 cyl. Toyota Camry?
What submodel (like LX, etc.)

Jul 13, 2010 | 1994 Toyota Camry

1 Answer

1999 Camry 4 cyl. 104k miles, throwing codes p0125, p1130, p1135


P0125- Engine not reaching operation temp quick enough. Possible problems:
  • Insufficient warm up time
  • Low engine coolant level
  • Leaking or stuck open thermostat
  • Faulty coolant temp sensor
  • P1130- A/F Sensor Circuit Range/performance, Bank 1 Sensor 1

Oct 15, 2009 | 1999 Toyota Camry

Not finding what you are looking for?
1999 Toyota Camry Logo

615 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...