Question about 2005 Nissan Terrano 2.7
Torque converter model td27 got damage
You will need to have the transmission removed to access the torque converter. A new torque converter should fix things unless debris from the damage has spread throughout the trans, in which case a strip down of the trans is the way to go...or a new/secondhand trans is installed.......
Posted on Apr 15, 2015
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Did you hear the one about the Terrano with a charging problem?
Just fix it by replacing the thermostat!
Seriously - check your temperature gauge does it take ages for the needle to barely get off cold? (and is the heater useless?)
The needle should get to just below half way in 2 or 3 minutes.
If the thermostat is stuck open, then the engine does not get up to temperature.
The glow plug control senses the engine temperature is cold, so the glow plugs stay on for an extended period of time (sometimes 10 to 15 minutes) - short trips particularly in winter, with more headlight driving - the alternator can't keep up with the current being drawn off and from time to time you will end up with a flat battery!
A thermostat is cheap, and easy to replace (three bolts and about a half litre of coolant - I pumped the coolant from the top of the radiator, and didn't spill a drop when the thermostat housing was removed).
Sure enough, as the engine temperature reached about 50C, the glow plugs turned off.
Posted on Jul 21, 2009
some black smoke comes out when i put foot down and loses power when goiong uphill i have a nissan mistral/terrano 2.7td
Posted on Aug 20, 2009
valve clearance is .014 inch for intake and exhaust with engine warm.
head torque it 21 ftlbs, then 44 ftlbs, then loosen all, torque to 89 inchlbs, then to 21ftlbs, then mark and turn the bolts an additional 60 to 65 degrees.
cyl head sub bolts torque 80 to 100 inchlbs.
Posted on Jan 13, 2011
Tips for a great answer:
Aug 08, 2015 | Nissan Cars & Trucks
Oct 18, 2014 | Nissan Terrano Cars & Trucks
Oct 26, 2013 | Nissan Terrano Cars & Trucks
I do modifying Nissan Cab installing TD27 Engine with auto transmission. But when i buy the engine, they didn't give the wire harness and computer box. Now i need to by the same. So can you pls advise the Relevant part# or code which i need to search.
Jun 22, 2012 | Nissan Pathfinder Cars & Trucks
Apr 08, 2011 | Nissan Pickup Cars & Trucks
Jan 13, 2011 | 1990 Nissan Hardbody King Cab
Sep 26, 2009 | 1999 Dodge Durango
Apr 04, 2009 | 1999 Nissan Pathfinder
Nov 25, 2008 | 1999 Nissan Pathfinder
143 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: