Question about 1996 Mazda Familia

1 Answer

Running lights wont work, bulbs are fine.

Hello, I've got a 1994 Mazda familia hatchback. now i had to replace a bulb on the headlights (that little vertical narrow light..parking light/running light) i did that, now none of the parking brakes/running lights work. i checked the fuses, all good and all the bulbs are ok. power is getting to the lights as the turn signals are running of the same circuit. could it be a sensor, but where is it. the parking brake connector is still attached and seems fine.thank you also, the alarm when the key is left in the ignition isn't working either.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Mazda Master
  • 3,679 Answers

Are you sure you pushed the wire connectors fully home? the alarm probably is disarmed when key in ignition,otherwise it would trigger when you want to start vehicle.The only other thing with your lights there may be a relay for that particular circuit check in the workshop manual hope this helps

Posted on Mar 29, 2014

  • James Lewis
    James Lewis Mar 29, 2014

    i dont have the manual as im just trying to get it warrant of fitness level. the alarm i meant was when you leave the lights on and try to exit the vehicle. not an immobilser style, just the factory. thanks for the info, though all your suggestions have been checked.

×

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 109 Answers

SOURCE: 1998 mazda protoge no brake lights

you just have a bad connection in there or you got a bad ground have someone check that..

Posted on Dec 05, 2008

  • 5 Answers

SOURCE: Mazda 3 tail light on, brake light not on

The bulb actually has two seperate elements in it.
That is why the tail light works fine.

If you take the bulb out you will see the seperate elements.
Change the bulb and it should be fine.

Posted on Jan 10, 2009

  • 297 Answers

SOURCE: 1999 Mazda 626 no rear lights!

fuse or wire harness, checked the voltage present in the fittings? Switch on before checking.
you get 12 volts more or less?

Posted on Apr 15, 2009

  • 510 Answers

SOURCE: mazda eunos dash lights and rear lights not working

Check fuse f3 located in fascia fuse box,below steering wheel just above data link connection 15AMP
Fuse under bonnet f7 also connected to dash/rear lights,but if this blows you would have no indicators as well
good luck barry

Posted on Mar 13, 2010

  • 286 Answers

SOURCE: Why rear brake lights not working on 1990 Mazda

You'll have to inspect the brake light switch at the pedal box assy. Damaged switch or wiring could give the previous symptoms you describe.! Good luck

Posted on Apr 05, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 2008 Mazda 5 minivan how do I change the headlight bulb


Headlight Change 2006-2010 Mazda 5 - CarCareKiosk

www.carcarekiosk.com/video/2009_Mazda_5_Sport_2.../headlight
This free video shows how to change a burnt out headlight on a 2009 Mazda 5 Sport 2.3L 4 Cyl.. Complete instructions for replacing a head light bulb on a 2009 ...

Low beam head light bulb replace 2000-2006 Mazda Mpv ...

? 5:11
https://www.youtube.com/watch?v=kblzMLRJrok
Jun 29, 2013 - Uploaded by hp11208
Low beam head light bulb replace 2000-2006 Mazda Mpv .... My step dad and I successfully replaced a headlight yesterday! :-) ...I've lost it trying to replace the bulb. if anyone can let me know I would really appriciate it thanks ! ..... 5:00. Cleaning your IAC to fix rough idle on 2000 or 2001 Mazda MPV ...

Nov 29, 2015 | Mazda Cars & Trucks

1 Answer

My 2008 mazda6 headlights are terrible at lighting up the road what can i do i've changed the bulbs but still crappy hi beam works good


There is not much you can do, Some cars are just that You can get higher wattage bulbs, But in most Provinces & States they are (iligal) to use them, There only for off road use,

Oct 28, 2012 | 2004 Mazda 6

1 Answer

Mazda familia 1997 replace fuses


Either look at the auxillary light, courtesy light, maybe dome light fuses. Good luck. Please rate my answer so I get points for it.

Jan 20, 2012 | Cars & Trucks

1 Answer

Head light high beam on right side does not work


Dear Sir,
If only rh headlight high beam is not working then it is problem with bulb or coupler at bulb end, if u have spare bulb replace it and check it if it work then bulb was faulty if not then problem with bulb socket , if you don't have spare bulb you can check with rh side bulb for testing purpose only, i hope problem will solve after replacing bulb,please let me know if any issue. Thanks.

Oct 09, 2010 | 1994 Mazda 323

1 Answer

My headlights work on brights but wont work on


might have to replace the headlights/bulbs. I have an 85 rx7 and I didnt have low beams only high and I replaced both headlights and now they work.

Oct 19, 2009 | 1994 Mazda RX-7

2 Answers

Need to change headlight on 2003 mazda rx 6


If it is the headlight itself. There may be a cover or shroud on the front of the engin bay. Remove that, may be a combination of clips and screws. If it does not cever the light area, it is even easier. There will probably be 3 screws or nuts, remover these and unplug the electrical to the light. From there you should just be able to pop the light out of place. If you are just replacing the bulbs. Where the power goes into the assembly, turn the clip, may be grey in color and pull out of the headlight assembly and replace the light bulb. But don't touch the new bulb the oils from your skin will damage the bulb.

Apr 22, 2009 | 1994 Mazda MX-6

1 Answer

Passenger side headlamp wont light up


I'm assuming globe means bulb. I have replaced many bulbs that look fine, and that turns out to be the problem. But to stop you from chasing down a problem that isn't there, test the connector that attaches to the bulb. Should be power there with the head lights on. There should be a fuse, and a relay. The fuse is under the dash or on the side of the dash near the door hinges, I'm just not sure if this car would have seperate fuses for L headlight and R headlight. But you should check power first at the connector.

Feb 26, 2009 | 1990 Mazda MX-5

1 Answer

Mazda 3 tail light on, brake light not on


The bulb actually has two seperate elements in it.
That is why the tail light works fine.

If you take the bulb out you will see the seperate elements.
Change the bulb and it should be fine.

Jan 09, 2009 | 2004 Mazda 3

Not finding what you are looking for?
1996 Mazda Familia Logo

100 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7768 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...