Question about 1996 Toyota Hilux

2 Answers

Broken door locks

Hilux 2x4 workmate door locks need replacing as they have worn out I need to get detailed instruction as to how to replace them

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Master:

    An expert who has achieved Level 3.

  • Master
  • 435 Answers

Then you'll be needing to remove the inside door panel. There should be a clip on the lock mechanism and a rod attached to it. What I'd do is go down to a u-pull it lot and find a similar model and remove the door panel and see what you're up against. Then you can decide if you want to get into it yourself or have it done by a mechanic or a locksmith, whichever is cheaper. Goog luck.

Posted on Mar 29, 2014

Ad
  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that got 5 achievements.

    Night Owl:

    An expert who has answered 10 or more questions between 12 midnight and 6am on the same day.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 37 Answers

Open door remove door cards remove film remove wiring clip unbolt door lock remove accutator bar from door lock pull door lock out now repeat back words

Posted on Mar 29, 2014

Ad

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

emissionwiz
  • 76132 Answers

SOURCE: Need detail picture of inside of drivers door

Lube the window glass channels with spray silicone, it can be had from any parts store, really soat them, that will cure the window sticking problem. Don't get this on the paint or the plastic of the door panel, it may stain.

Posted on May 08, 2009

gessneruk
  • 22 Answers

SOURCE: how to replace front door handle on a 2001 toyota sienna van

We made a page with pictures and descriptions of this exact job.

Hope it helps.

http://www.findonefindall.com/toyota-sienna/siennadoorhandle.htm

All the Best
David

Posted on Aug 28, 2009

  • 233 Answers

SOURCE: Tapping noise on start up then fades away all

The tapping is normal at start up, and is caused by lack of oil at the top of engine. The sound goes away within the time frame you stated (30-40 seconds). You have nothing to worry about.

Posted on Jul 05, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Engine won't start, will clutch but no key.


Neutral safety switch? At the clutch pedal.

Oct 29, 2016 | Toyota Hilux Cars & Trucks

1 Answer

I'm looking for cruise control for 06 B4000 Mazda


the best brand is commodore brand and they have a huge range to suit most every vehicle
I have one fitted to a toyota hilux and it is warranted as well as the vehicle itself It is a toyota recommended after market fit as the hilux (workmate ute) is not factory fitted with a cruise control
I self fitted the same brand to a mazda b2600 ute and it was faultless fir the time I had the vehicle
can be obtained from commodore on line or from off road shops

Aug 31, 2016 | Mazda Cars & Trucks

1 Answer

Can anyone please assist me? I'm looking for the specs on the 2.7 vvti hilux raider d/c


Herman, Google search your year,make and model# specifications or manual. Check the attached links,instruction and guides, Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
Toyota Hilux Wikipedia the free encyclopedia
Hilux facelift driven in Bloem
http://www3.toyota.com.au/hilux/specifications/workmate-4x2-single-cab-cab-chassis-4-cylinder-petrol-manual

Aug 22, 2016 | Toyota Cars & Trucks

1 Answer

Does a hilux 2008 model have l sd diff


2wd workmate NO.

4wd, cab chassis, SR5 YES, they have a Limited Slip Differential, you will need to run Castrol LSX 90.

Aug 10, 2016 | Cars & Trucks

1 Answer

2004 ford focus driver door will not open when door handal is pulled what do i need to fix it


need to open the door skin (remove from door)
there should be a metal rod going to the inside of the handle if lifting the handle is not opening the lock you will have to bend it in such a manner that it will put more strain on it (tighten) from the lock to the handle then replace door and try again, f not the inside of your handle may be broken or damaged check it on the inside for worn eyelet hole or broken and replace as needed

Sep 27, 2014 | 2004 Ford Focus

2 Answers

2001 Mercedes 430 Doors won't lock-trunk won't unlock--OBDII reads 888 Sounds like fuse. Can you help?


Hi, if all of the locks on your Mercedes fail to open (or close) first check your key fob to make certain that its battery is working. Replace the worn out battery, if necessary. If key fob is working, you may have a faulty key fob, which can be repaired or replaced by taking it to your dealer.
If just one lock won't open on your Mercedes, then the problem may rest with broken wiring, a bad solenoid, or perhaps with a blown fuse. Check your fuse box first to determine if a blown fuse is keeping the lock from working. If so, replace the fuse.
You likely have a shorted door lock actuator, which you can replace with a new unit for the lock that is not working. If a door unlocks, but will not lock again, then replace the door switch.

Besides there is not OBD II 888 code, i have never heard or seen it before...

Feb 07, 2011 | 2003 Mercedes-Benz S-Class

1 Answer

2004 jeep grand cherokee special edition, windows won't work, doors won't lock (except with key) auto door locks doesn't work either, and dimmer switch for dash whenever turned on all interior lights go on...


sounds like a blown relay and also a blown fuse or two, check the relays under the bonnet and under the dash, you will surely find a broken/worn/burnt out one, replace it (not sure which one it is but they renge from £3/$5 to about £12 - $25 then replace the fuses, if there is no bad relay then just replace any blown fuses - hopefully it's just a worn out relay and not something wrong with the windows or locks that blew the relay in the first place -

Jan 15, 2010 | 2004 Jeep Grand Cherokee

2 Answers

Starter barely turns over. battery is good.


the leads to the starter may need replacing, the connections on the battery and starter could be loose
the contacts in the starter relay may be worn out ( had that problem on my hilux ute)

May 03, 2009 | 1997 Oldsmobile Achieva

2 Answers

Cannot open door from inside on front driverside


29 cent part my fix your problem. There is a nipple on the interior door lock lever that fits into a slot on the door handle lever. Look at passenger side to compare. The nipple is covered with a plastic spacer that may come off. The spacer keeps the lock nipple snug in the handle lever slot; pull the handle lever, it engages the lock lever, opening door. I bought a .29 cent aluminum spacer (#8x1/4 x 1/4) from Orchard hardware. Take needle nose pliers and slip the spacer on, then super glue. Unfortunately if lock lever (where riveted) is badly worn, then it may pivot upward instead of perpendicular to the door, thus defeating new spacer. But you may now be able to open door by pulling handle lever and lock lever at the same time. If you need to replace door handle, others on this site have suggested that you not replace metal frame that door handle is mounted on, but drill out rivets that hold door handle mount.

Jan 29, 2009 | 2001 Lincoln LS

1 Answer

95 blazer, front driver window motor broken need to get window up


When removing the door panel, you need to remove all of the screws first. Then pull the door panel off. There should be screws around the edges or the door panel, and 1-2 screw on the door handle(on the inside). Then pop the door panel off, if the blazer has electric windows and locks you have to disconect them first, if it doesnt have power locks and windows, you have to take the window crank off,there should be a screw in the center of that. Unscrew the door lock and pull up. If it doesnt have them locks then you have to disconect it from inside the door panel

Nov 30, 2008 | 1995 Chevrolet Blazer

Not finding what you are looking for?
1996 Toyota Hilux Logo

56 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

76132 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...