Question about 2007 Chrysler Sebring Sedan

Open Question

The engine does like it wants to start then it drags. almost like the timeing is off. the codes are u1120 and u1412.

The battery, fuse, and engine lights flash.

Posted by Anonymous on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Whats the answer for U1120 engine diagnostic on 2008 Chrysler Aspen?


Lizzie, U1120 means the PCM doesn't receive a vehicle speed signal from the Anti-lock brake Module over the CAN C bus. You may have to have a good tech. diagnose and estimate repair. Check the attached links,instruction and guides, Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
U1120 Engine Diagnostic Code For 2008 Chrysler Aspen
Error Code U1110 and U1120 Chrysler Forum Chrysler Enthusiast Forums
HELP Codes U1120 U0121

Aug 11, 2016 | Chrysler Cars & Trucks

4 Answers

2005 Dodge Durango 4.7 V8


Hi...
The code U1120 on DODGE,JEEP.CHRYSLER, PLYMOUTH.

The Defenition for this code is ; Lost Wheel Speed message.

Is related to a loss of speed comunication on the ABS Module.
And the ECM. Over the CAN C BUS.

Possible Causes. Can c bus, Open circuit or shorted.
Anti-lock Brake Module. Damaged. normally this happend when the car had an Accident. and is scrached.
On Rare Cases the ECM defective or desprogramed.
And some times Come As a Result of giving jump cables to start the Vehicle.

I hope this help on you question.
Thank you for use fixya.........

Aug 16, 2008 | 2005 Dodge Durango

1 Answer

2007 Chrysler Aspen


is this a jeep or and aspen. confusing post for sure.

like all 1996 and newer cars in usa;.
do a pcm reset,
drive see if they clear. (see if they self clear) if not , they are REAL.

how to do that , there are 3 ways
  • pull battery , neg lug. (radio codes lost. nav lost, trans relearn happens... shift hard till it learns...
  • better pull pcm memory fuse. (PCM OID FUSE)
  • best, push the reset button on the scan too. rent a tool?
1103 means service light on, so is useless in view of others.

ever search first.
here is ASE guys. pros. 1st hit btw.

http://www.2carpros.com/questions/the-following-codes-appeared-u110e-u1411-u1120-u0101-u110c

or look in your FSM book first. see those words telling what each mean? if sounds like greek, then get car fixed?

Jul 08, 2014 | Jeep Compass Cars & Trucks

1 Answer

Dodge Durango engine knocking and check engine light


P0300 is a Random Misfire
P0302 #2 Cylinder Misfire
U1120 The code U1120 means, lost wheel distance message. The powertrain control module(PCM) is not
receiving a signal from the anti-lock brake module. The problem could be a short in the bus circuit,
the PCM or the anti-lock brake module. This type of problem is best diagnosed by the dealer or a
local shop with the proper diagnostic scanning equipment. Hope this helps.

Apr 14, 2013 | 2004 Dodge Durango

1 Answer

2006 dodge dakota code u1120


Time to get it into the dealer, unless you have the proper equipment to diagnose the problem. I won't mess with anything electrical on any vehicle.

Jul 22, 2012 | 2006 Dodge Dakota Quad

1 Answer

Engine light comes on problem code is U1120


U1120 means the PCM doesn't receive a vehicle speed signal from the Anti-lock brake Module over the CAN C bus. This can be caused by the ABS module, PCM or something wrong with the can bus. This might be just an erroneous code and may never set again

Sep 26, 2010 | 2005 Dodge Durango

3 Answers

I HAVE A 2005 DODGE DURANGO CHECK ENGINE LIGHT IS ON TOOK IT TO AUTO ZONE THEY TESTED IT GAVE ME 2 CODES P0068 AND U1120 WHAT DO THESE MEAN? I WAS DRIVING AND THE CAR JUST STOPPED IT WOULD NOT ACCELERATE...


The code that tells why it died is the P0068 the throttle position sender. It can be bad but they usally last a long time. Other sensers can have troble and pull down the 5 volt reference signal and it'll make it appear that the senser is bad. You can pump the gas very quickly many times and make even a good car set this code. The computer sees a smooth signal from the senser it'll set things back to normal and it'll run just fine. The senser can be teated with an OHM meter center pin of the serser to one or the other outside termial. with the meter making a good conection. the senser should make a smottth change up and down and return to the same value as you started and never go off scale, the other terminal should do the same thing but only in the opasit direction. If it doesn't its bad but a new one stick in on fire it up and run down to the store and have them erease codes telling them you replaced the bad part and need to reset. Even then they sometimes won't do it as some stores have run into troblem with the wrong customer and they don't reset codes anymore. Then you'll have to go to a shop the has a code reader or a scanner to reset the light and or buy your own but about $80 is the cheapest you'll see for a reader that will reset (erease cdes) on OBDII vehicals. good luck

May 21, 2010 | 2005 Dodge Durango

1 Answer

CHECK ENGINE LIGHT CODE U1120


LOST WHEEL DISTANCE MESSAGE

Oct 16, 2008 | 2005 Dodge Durango

3 Answers

Dodge codes.


U codes are undercarriage codes, It can be possible that this code is directly related to a mistake done while the oil was changed. Although a description of the code will help a little more.

Jul 07, 2008 | 2005 Dodge Dakota

Not finding what you are looking for?
2007 Chrysler Sebring Sedan Logo

Related Topics:

14 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8575 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...