- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
disconnect the battery both leads then join them together and leave for half hour or one coffee in the local bar and a ciggy then reconnect and it should start ,this mazda uses the same software as a ford mondeo and a jaguar S type of the same year and it works on them
there are so many security systems that its hard to tell without the model of car. but you can go to a dealership, and they should be able to give you a readout on how to reset system for your vehicle. just tell them you need a printout of how to reset anti-theft system. have a good day !!
Immobilisers may intercept one of three circuits; typically the low-voltage ignition circuit and the fuel pump circuit. Some may also intercept the low-current starter motor circuit from the key switch to the relay. The Immobilisers can be set to intercept these circuits IF you use a key that has been copied or someone tried to start the car with the key for another car. Once activated, most of the time they are on a timer, meaning they will reset in 10 to 20 minutes. You can try and reset yours by disconnecting the battery, remove both cables and touch the two cables together for ten minutes. Now if you have a radio that needs codes to reset it be sure you have the codes before disconnecting the battery. Some Immobilisers use a magnetic switch to turn off the car. buy disconnecting the battery and touching the cables together you will kill the magnetic field and reset it. Hope this helps fixya up.