Question about 2005 Hyundai Accent

Open Question

P0124 code problem

Posted by Anonymous on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2002 Code P124


Not knowing what kind of car, model, engine this is my best answer on the noise from your description would be that you should replace the belt tensioner. As to your P code if you mistyped P0124 then that refers to the throttle position sensor. I personally would first spray the sensor plug with Radio Shack contact cleaner/lube and see if that fixed it (it is winter), a dirty throttle body can cause the butterfly not close properly as well, and last it could just be a failing sensor. Good luck!

Jan 05, 2014 | Dodge Grand Caravan Cars & Trucks

1 Answer

Need free help when trouble codes come up 1124 and 1128 no power unless you step on it then it takes of but as soon as you let off it dogs deown again no power


the antivirus has been playing whilst i have been at work so my codes programme doesnt work anyway firing up notepad and that has just locked up ,not my night tonight thats for sure .

P0124....Throttle/Pedal Position Sensor/Switch A Circuit Intermittent


P0128....Coolant Thermostat (Coolant Temperature Below Thermostat Regulating Temperature)

right got them from other computer and from what they say then you need to change the throttle sensor ,its on the end of the throttle pedal ,but the other one is easy to fix check that you have a thermostat fitted ,if you have then whats the local ambient temperature where you are as you may need to block off the radiator with a piece of cardboard to stop the wind chill factor

Jan 21, 2011 | Hyundai Tiburon Cars & Trucks

1 Answer

At times or most of the time the fuel data keeps cycling through all its functions including the change engine oil lamp.


There can be a misfire too from the cylinders.

An engine that hesitates, stumbles or misfires when accelerating or when it is under load is an engine that is either sucking too much air, not getting enough fuel or misfiring. If the Check Engine Light comes on, you may find any of the following codes:

• P0171, P0174 Lean fuel condition codes
• P0120 to P0124 Throttle position sensor codes
• P0222 to P0229 Throttle position sensor codes
• P0400 to P0409 EGR related codes

If there are no misfire codes, a common cause of acceleration stumble is a bad throttle position sensor (TPS). The TPS tells the computer how far the throttle is open. The computer uses this information to determine how much fuel is needed to maintain the correct air/fuel mixture and when extra fuel is needed if the throttle suddenly opens wide.

Another common cause is dirty fuel injectors. If varnish deposits have built up in the tips of the injectors, they won’t spray as much fuel as they normally do, or will “dribble” fuel instead of spraying a fine mist. This creates a lean fuel mixture and conditions that are ripe for stumble and hesitation (also misfire). Look at short term fuel trim (STFT) and long term fuel trim (LTFT) with your scantool. If the numbers are high, it tells you the engine is running lean and the injectors need cleaning. Treat mild cases with a high quality fuel-injector cleaner additive. Severe cases require professional cleaning equipment.

Also if this sensors apply to your vehicle, camshaft sensor or crankshaft sensor if sensors bad you don't get any spark. Also run a scan on the car.

Good luck and rate this solution, please.

Apr 06, 2010 | 1992 Cadillac DeVille

1 Answer

Transmission vibrates hard during accleration, not in neutral, or when load is reduced or eliminated. ONLY during acceleration, or load, e.g. hill, trailer.


There can be a misfire too from the cylinders.

An engine that hesitates, stumbles or misfires when accelerating or when it is under load is an engine that is either sucking too much air, not getting enough fuel or misfiring. If the Check Engine Light comes on, you may find any of the following codes:

• P0171, P0174 Lean fuel condition codes
• P0120 to P0124 Throttle position sensor codes
• P0222 to P0229 Throttle position sensor codes
• P0400 to P0409 EGR related codes

If there are no misfire codes, a common cause of acceleration stumble is a bad throttle position sensor (TPS). The TPS tells the computer how far the throttle is open. The computer uses this information to determine how much fuel is needed to maintain the correct air/fuel mixture and when extra fuel is needed if the throttle suddenly opens wide.

Another common cause is dirty fuel injectors. If varnish deposits have built up in the tips of the injectors, they won’t spray as much fuel as they normally do, or will “dribble” fuel instead of spraying a fine mist. This creates a lean fuel mixture and conditions that are ripe for stumble and hesitation (also misfire). Look at short term fuel trim (STFT) and long term fuel trim (LTFT) with your scantool. If the numbers are high, it tells you the engine is running lean and the injectors need cleaning. Treat mild cases with a high quality fuel-injector cleaner additive. Severe cases require professional cleaning equipment.

Also if this sensors apply to your vehicle, camshaft sensor or crankshaft sensor if sensors bad you don't get any spark. Also run a scan on the car.

Good luck and rate this solution, please.

Apr 07, 2010 | Mitsubishi Eclipse Cars & Trucks

1 Answer

When I try to start my 08 escape xlt, the engine doesn't turn over. I tried to get a boost from 2 different sources and neither worked. The fuses and relays all look fine and the only light that lights up...


There can be a misfire too from the cylinders.

An engine that hesitates, stumbles or misfires when accelerating or when it is under load is an engine that is either sucking too much air, not getting enough fuel or misfiring. If the Check Engine Light comes on, you may find any of the following codes:

• P0171, P0174 Lean fuel condition codes
• P0120 to P0124 Throttle position sensor codes
• P0222 to P0229 Throttle position sensor codes
• P0400 to P0409 EGR related codes

If there are no misfire codes, a common cause of acceleration stumble is a bad throttle position sensor (TPS). The TPS tells the computer how far the throttle is open. The computer uses this information to determine how much fuel is needed to maintain the correct air/fuel mixture and when extra fuel is needed if the throttle suddenly opens wide.

Another common cause is dirty fuel injectors. If varnish deposits have built up in the tips of the injectors, they won’t spray as much fuel as they normally do, or will “dribble” fuel instead of spraying a fine mist. This creates a lean fuel mixture and conditions that are ripe for stumble and hesitation (also misfire). Look at short term fuel trim (STFT) and long term fuel trim (LTFT) with your scantool. If the numbers are high, it tells you the engine is running lean and the injectors need cleaning. Treat mild cases with a high quality fuel-injector cleaner additive. Severe cases require professional cleaning equipment.

Also if this sensors apply to your vehicle, camshaft sensor or crankshaft sensor if sensors bad you don't get any spark.

Good luck and rate this solution, please.

Mar 16, 2010 | 2008 Ford Escape

2 Answers

Please describe your what is the number one cause of a northstar cadillac sts 96 to not start and run but turn over but it acts like it wants to run but just wont fire checked the fuel pump and it is...


There can be a misfire too from the cylinders.

An engine that hesitates, stumbles or misfires when accelerating or when it is under load is an engine that is either sucking too much air, not getting enough fuel or misfiring. If the Check Engine Light comes on, you may find any of the following codes:

• P0171, P0174 Lean fuel condition codes
• P0120 to P0124 Throttle position sensor codes
• P0222 to P0229 Throttle position sensor codes
• P0400 to P0409 EGR related codes

If there are no misfire codes, a common cause of acceleration stumble is a bad throttle position sensor (TPS). The TPS tells the computer how far the throttle is open. The computer uses this information to determine how much fuel is needed to maintain the correct air/fuel mixture and when extra fuel is needed if the throttle suddenly opens wide.

Another common cause is dirty fuel injectors. If varnish deposits have built up in the tips of the injectors, they won’t spray as much fuel as they normally do, or will “dribble” fuel instead of spraying a fine mist. This creates a lean fuel mixture and conditions that are ripe for stumble and hesitation (also misfire). Look at short term fuel trim (STFT) and long term fuel trim (LTFT) with your scantool. If the numbers are high, it tells you the engine is running lean and the injectors need cleaning. Treat mild cases with a high quality fuel-injector cleaner additive. Severe cases require professional cleaning equipment.

Also if this sensors apply to your vehicle, camshaft sensor or crankshaft sensor if sensors bad you don't get any spark.

Good luck and rate this solution, please.

Mar 16, 2010 | Cadillac STS Cars & Trucks

1 Answer

My motor cranks but will not fire. Have checked fuses and yes there is fuel at the filter.Any suggestions?


There can be a misfire too from the cylinders.

An engine that hesitates, stumbles or misfires when accelerating or when it is under load is an engine that is either sucking too much air, not getting enough fuel or misfiring. If the Check Engine Light comes on, you may find any of the following codes:

• P0171, P0174 Lean fuel condition codes
• P0120 to P0124 Throttle position sensor codes
• P0222 to P0229 Throttle position sensor codes
• P0400 to P0409 EGR related codes

If there are no misfire codes, a common cause of acceleration stumble is a bad throttle position sensor (TPS). The TPS tells the computer how far the throttle is open. The computer uses this information to determine how much fuel is needed to maintain the correct air/fuel mixture and when extra fuel is needed if the throttle suddenly opens wide.

Another common cause is dirty fuel injectors. If varnish deposits have built up in the tips of the injectors, they won’t spray as much fuel as they normally do, or will “dribble” fuel instead of spraying a fine mist. This creates a lean fuel mixture and conditions that are ripe for stumble and hesitation (also misfire). Look at short term fuel trim (STFT) and long term fuel trim (LTFT) with your scantool. If the numbers are high, it tells you the engine is running lean and the injectors need cleaning. Treat mild cases with a high quality fuel-injector cleaner additive. Severe cases require professional cleaning equipment.

Also you might need to run a test on your starter/ fuel line for blockage. I suspect the fuel line blockage not getting enough fuel to engine but we cannot rule out other things around the engine transmission.

Good luck and rate this solution, please.

Mar 14, 2010 | 2000 Toyota Land Cruiser

1 Answer

The car starts fine when i first turn it on. After driving a lil while the car warms up and i stop somewhere,the store or where ever, turn it off. i come back a couple mins later and it takes a good 3+...


There can be a misfire too from the cylinders.

An engine that hesitates, stumbles or misfires when accelerating or when it is under load is an engine that is either sucking too much air, not getting enough fuel or misfiring. If the Check Engine
Light comes on, you may find any of the following codes:

• P0171, P0174 Lean fuel condition codes
• P0120 to P0124 Throttle position sensor codes
• P0222 to P0229 Throttle position sensor codes
• P0400 to P0409 EGR related codes

If there are no misfire codes, a common cause of acceleration stumble is a bad throttle position sensor (TPS). The TPS tells the computer how far the throttle is open. The computer uses this information to determine how much fuel is needed to maintain the correct air/fuel mixture and when extra fuel is needed if the throttle suddenly opens wide.

Another common cause is dirty fuel injectors. If varnish deposits have built up in the tips of the injectors, they won’t spray as much fuel as they normally do, or will “dribble” fuel instead of
spraying a fine mist. This creates a lean fuel mixture and conditions that are ripe for stumble and hesitation (also misfire). Look at short term fuel trim (STFT) and long term fuel trim (LTFT) with your
scantool. If the numbers are high, it tells you the engine is running lean and the injectors need cleaning. Treat mild cases with a high quality fuel-injector cleaner additive. Severe cases require professional cleaning equipment.

Good luck and rate this.

Mar 08, 2010 | 1997 Volkswagen GTI

2 Answers

Car will not stay idle after had to get someone to unlock it because I locked the keys in the car


There can be a misfire too from the cylinders.

An engine that hesitates, stumbles or misfires when accelerating or when it is under load is an engine that is either sucking too much air, not getting enough fuel or misfiring. If the Check Engine
Light comes on, you may find any of the following codes:

• P0171, P0174 Lean fuel condition codes
• P0120 to P0124 Throttle position sensor codes
• P0222 to P0229 Throttle position sensor codes
• P0400 to P0409 EGR related codes

If there are no misfire codes, a common cause of acceleration stumble is a bad throttle position sensor (TPS). The TPS tells the computer how far the throttle is open. The computer uses this information to determine how much fuel is needed to maintain the correct air/fuel mixture and when extra fuel is needed if the throttle suddenly opens wide.

Another common cause is dirty fuel injectors. If varnish deposits have built up in the tips of the injectors, they won’t spray as much fuel as they normally do, or will “dribble” fuel instead of
spraying a fine mist. This creates a lean fuel mixture and conditions that are ripe for stumble and hesitation (also misfire). Look at short term fuel trim (STFT) and long term fuel trim (LTFT) with your
scantool. If the numbers are high, it tells you the engine is running lean and the injectors need cleaning. Treat mild cases with a high quality fuel-injector cleaner additive. Severe cases require professional cleaning equipment.

Good luck and rate this.

Mar 07, 2010 | 2004 Dodge Stratus

1 Answer

Will turn over wont start I would like to check the fuel pump by running a hot wire from the terminal plug in next to the stering column to fuel pump but iinstructions say to hook it to G, but I cant find...


There can be a misfire too from the cylinders.

An engine that hesitates, stumbles or misfires when accelerating or when it is under load is an engine that is either sucking too much air, not getting enough fuel or misfiring. If the Check Engine
Light comes on, you may find any of the following codes:

• P0171, P0174 Lean fuel condition codes
• P0120 to P0124 Throttle position sensor codes
• P0222 to P0229 Throttle position sensor codes
• P0400 to P0409 EGR related codes

If there are no misfire codes, a common cause of acceleration stumble is a bad throttle position sensor (TPS). The TPS tells the computer how far the throttle is open. The computer uses this information to determine how much fuel is needed to maintain the correct air/fuel mixture and when extra fuel is needed if the throttle suddenly opens wide.

Another common cause is dirty fuel injectors. If varnish deposits have built up in the tips of the injectors, they won’t spray as much fuel as they normally do, or will “dribble” fuel instead of
spraying a fine mist. This creates a lean fuel mixture and conditions that are ripe for stumble and hesitation (also misfire). Look at short term fuel trim (STFT) and long term fuel trim (LTFT) with your
scantool. If the numbers are high, it tells you the engine is running lean and the injectors need cleaning. Treat mild cases with a high quality fuel-injector cleaner additive. Severe cases require professional cleaning equipment.

Good luck and rate this.

Mar 07, 2010 | 1991 Chevrolet Camaro

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

15 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8514 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...