Question about 2003 Suzuki Aerio

1 Answer

Heres my problem i got a 2003 suzuki aerio and i had to pull the motor and the crankshaft position sensor wires came out of the connector what wires connect together coming from crankshaft position

Pulled the motor and the crankshaft position sensor wires came out of the connector which ones connect together coming from crankshaft position sensor wires are red, black, and white and wires coming off the harness are black, light brown, black with red

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Suzuki Master
  • 20,706 Answers

This is in the FSM. (no engine options stated so no one can guess)
its at ALLDATA.COM
its also online at the suzuki pit stop for $4 day pass
btw all suz conn. have locks, never force any connector on any suzuki
(hint they dont sell em. the bums)
and use the toggle levers on them. to release the locks and sure
dont yank them.
just $4 bucks and not have FULL docs.
amazing , huh?

https://suzukipitstopplus.com/Products/1178-2003-aerio-service-manual.aspx

tell more get more, no engine stated, so...............????????????
and no country, oops. they are not all the same.... so......?????

Posted on Mar 30, 2014

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 174 Answers

SOURCE: I need the owner manual suzuki aerio 2003

Check the eBay website. They usually have a lot of various owner manuals for sale on the site. I hope this helps!

Posted on Aug 04, 2009

  • 14 Answers

SOURCE: 1987 Suzuki Samurai alternator wiring. No original wire harness

yes the b goes to the battery.

http://bbs.zuwharrie.com

heres the site for you.. we have all the answers.

http://www.acksfaq.com/diagram_color_86-88_sam.htm

i drew this up a while back. it could help you out alot.

Posted on Apr 22, 2009

keithheavili
  • 410 Answers

SOURCE: my break lights wont work on my 2003 suzuki aerio

Sounds like your brake light switch, located on the brake pedal, has gone out. Shouldn't cost too much more than $20 to get a new part and about 30 min. to fix. Good luck and thanks for using FixYa!

Posted on Jun 27, 2009

  • 14036 Answers

SOURCE: Parking brake 2003 Suzuki Aerio

PARKING BRAKE HAS TO ADJUSTED IF OUT OF ADJUSTMENT.

Posted on Feb 15, 2010

HansPP
  • 2510 Answers

SOURCE: CRANKSHAFT POSITION SENSOR SUZUKI AERIO

It sits at the front of the engine at the level of the oil pan.

Posted on Feb 06, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

03 Suzuki aerio need a step by step how to: replace the timing chain! Please help


WOW you work on engines not knowing what is there?
the engines are: 7 engines.!!!
1.3 L I4; 1.5 L I4; 1.6 L I4; 1.8 L I4; 2.0 L I4; 2.3 L I4; 1.4 L Diesel I4 ill guess, ( (die roll)
2.3 L below.

all answers, USA cars, this a USA forum. so.....
ever heard of the FSM the oem factory service manual?

is the chain making noises? if yes, the guide is bad, most chains fail due to that (as a true cause)
the FSM is here , just $4 to look , so ????
https://suzukipitstopplus.com/Products/1178-2003-aerio-service-manual.aspx

the clone is Alldata.com DIY, log in and read like we do.
google alldtata.com , bingo....

now the 2.3L (just the first half, ill let you pay $4 like we do)
  1. Before servicing the vehicle, refer to the Precautions Section.
  2. Remove engine assembly from vehicle.
  3. Remove oil pan.
  4. Remove cylinder head cover.
  5. Remove timing chain cover as follows:
    • Remove crankshaft pulley bolt. To lock crankshaft pulley, use special tool 09917-68221 (camshaft pulley holder).
    • Remove crankshaft pulley. To remove crankshaft pulley, use special tools 09944-36011 and 09926-58010 (steering wheel remover and bearing puller attachment).
    • Remove A/C compressor bracket.
    • Remove alternator belt idler pulley, water pump pulley and alternator belt tensioner.
    • Remove timing chain cover bolts and nut.
    • For reinstallation of timing chain, turn crankshaft so that timing marks on cylinder head and lower crankcase match with those on sprockets as shown in figure.
    • Remove second timing chain as follows:
      • Turn crankshaft to meet following conditions.
        • Key (I) on crankshaft is positioned as shown.
        • Arrow mark on idler sprocket (II) points upward.
        • Marks on sprockets (III) match with marks on cylinder head. Note that this step must be followed for reinstallation of timing chain.
      • Remove timing chain tensioner adjuster No.2 and gasket. To remove them, slacken second timing chain by turning intake camshaft counterclockwise a little while pushing back pad.
      • Remove intake and exhaust camshaft timing sprocket bolts. To remove them, fit a spanner to hexagonal part at the center of camshaft to hold it stationary.
      • Remove camshaft timing sprockets and second timing chain.
      • warning
      • After second timing chain is removed, never turn intake camshaft, exhaust camshaft and crankshaft independently more than such an extent as shown. If turned, interference may occur between piston and valves and valves themselves, and parts related to piston and valves may be damaged.
      • Remove timing chain guide No.1.
      • Remove timing chain tensioner adjuster No.1.
      • Remove timing chain tensioner.
      • Remove idler sprocket and first timing chain.
      • Remove crankshaft timing sprocket.
      • end.
    im not doing INSTALL, sorry.


25540491-yqaloxbadhjyikzm2dpnlv4n-2-0.jpg got that? also there are a hole section on details of gasket seals and such, nothing trivial that.

Mar 09, 2015 | 2003 Suzuki Aerio

1 Answer

2003 suzuki cuts out and stalls code p0340


At $1000.00 USD I will not guess on the PCM nor should you..

Apr 16, 2014 | 2003 Suzuki Aerio

1 Answer

Crankshaft position sensor


The sensor would need to be tested with a meter. If it is faulty, the engine and - or transmission has to be removed to replace it.
You should be able to find the wiring harness as it goes into the transmission housing near the block.

Apr 23, 2013 | 2004 Suzuki Aerio

1 Answer

Dies at half throttle


most common ly it sounds like a crankshaft position sensor, or crankshaft position sensor.... is it throwing a check engine light? if so scan the codes...

Sep 04, 2012 | 2002 Suzuki Aerio

2 Answers

Where located fuel sensor Suzuki Ario 2003


Component location diagrams for most 2003 Suzuki Aerio cars and light trucks sold in the U.S. from 1990+.
clsk2003aeri003.gifIgnition System Components Location Diagram for 2003 Suzuki Aerio 2.0 L4 GAS
Components on diagram:
  • TP Sensor
  • Ignition Coil
  • ECM
  • MAF Sensor
  • CMP Sensor
  • clsk2003aeri007.gifElectronic Shift Control System Components Location Diagram for 2003 Suzuki Aerio 2.0 L4 GAS
    Components on diagram:
  • Data Link Connector
  • Transmission Range Sensor
  • Throttle Position Sensor
  • Pressure Control Solenoid Valve
  • Battery
  • clsk2003aeri010.gifInstrument Panel For Connector Layout Diagram Diagram for 2003 Suzuki Aerio SX 2.0 L4 GAS
    Components on diagram:
  • Clutch Switch
  • Thermistor
  • Brake Light Switch
  • Blower Motor Relay
  • Heater Fan Motor
  • clsk2003aeri011.gifInstrument Panel Harness Diagram for 2003 Suzuki Aerio SX 2.0 L4 GAS
    Components on diagram:
  • Wiper Switch
  • Washer Switch
  • Data Link Connector
  • Turn Signal Relay
  • Radio
  • clsk2003aeri015.gifHeadlight System Location Diagram for 2003 Suzuki Aerio SX 2.0 L4 GAS
    Components on diagram:
  • Headlight Relay
  • Headlight
  • Clearance Light
  • Headlight Diode
  • Clearance Light Relay
  • clsk2003aeri022.gifFuel System Components Diagram for 2003 Suzuki Aerio SX 2.0 L4 GAS
    Components on diagram:
  • Fuel Pump Relay
  • Fuel Tank Pressure Sensor
  • EVAP Canister
  • Fuel Tank Pressure Control Valve
  • Fuel Filler Cap
  • clsk2003aeri027.gifFloor For Single Unit Parts Diagram for 2003 Suzuki Aerio 2.0 L4 GAS
    Components on diagram:
  • Wheel Speed Sensor
  • ABS Control Module
  • G Sensor
  • Air Bag Control Module
  • EVAP Canister Vent Valve
  • clsk2003aeri030.gifInstrument Panel For Ground Point Diagram for 2003 Suzuki Aerio SX 2.0 L4 GAS
    Components on diagram:
  • Instrument Panel Ground Points
  • clsk2003aeri036.gifEngine Compartment For Single Unit Parts Diagram for 2003 Suzuki Aerio 2.0 L4 GAS
    Components on diagram:
  • Throttle Position Sensor
  • Horn Relay
  • Radiator Fan Control Relay
  • Cruise Control Module
  • Condenser Fan Relay
  • clsk2003aeri037.gifEngine Compartment Components Diagram for 2003 Suzuki Aerio SX 2.0 L4 GAS
    Components on diagram:
  • MAP Sensor
  • Knock Sensor
  • Noise Suppressor
  • Heated Oxygen Sensor
  • Sep 18, 2011 | 2003 Suzuki Aerio

    1 Answer

    HELP ! Sensor crankshaft position SUZUKI AERIO SX AWD 2.3L 2005.How to replace under the scheme ?


    Welcome to FixYa.com
    Crankshaft Position (CKP) Sensor Removal and Installation

    Removal

    1. Remove engine with transmission from vehicle.

    2. Remove transmission from engine and then remove flywheel or drive plate from crankshaft.

    3. Disconnect connector from crankshaft position sensor.

    4. Remove crankshaft position sensor (1) from cylinder block (2).

    Installation

    Image

    Reverse removal procedure noting the following.

    - Check to make sure that crankshaft position sensor (1) is free from any metal particles and

    damage.

    - Apply engine oil to O-ring of sensor.

    - Install crankshaft position sensor to cylinder block (2) with specified torque.

    Tightening torque

    Crankshaft position sensor bolt a: 6 N.m (0.6 kg-m, 4.5 lb-fl)

    - Connect connector and fix wire harness with clamp securely. Thank you for Using FixYa.comKind Regards, LeeYour FixYa Expert and Master Technician
    leedavidian_133.png

    Feb 06, 2011 | 2005 Suzuki Aerio SX

    1 Answer

    Where is a crankshaft position sensor on a Suzuki aerio


    Search on the circular plane of the flywheel area on the engine. It will have wires leading to it.

    What year, make (suzuki), model (aerio), and engine size is your vehicle?

    Feb 06, 2011 | Suzuki Aerio SX Cars & Trucks

    1 Answer

    CRANKSHAFT POSITION SENSOR SUZUKI AERIO SX 2.3L 2005


    It sits at the front of the engine at the level of the oil pan.

    Feb 06, 2011 | 2005 Suzuki Aerio SX

    1 Answer

    Where is the crankshaft sensor on a v6 2000 chrystler sebring


    CRANKSHAFT POSITION SENSOR - 2.5L
    REMOVAL
    Remove speed control servo from driver's side strut tower.
    Remove crankshaft position sensor retaining bolt Crankshaft Position Sensor
    Pull crankshaft position sensor straight up out of the transaxle housing.
    (Disconnect crankshaft position sensor electrical connector from the wiring harness connector.
    INSTALLATION - ADJUSTABLE
    All vehicles will be equipped with an adjustable crankshaft position sensor. This can be identified by an elongated mounting hole in the sensor.

    NOTE: If the removed sensor is to be reinstalled, clean off the old spacer on the sensor face. A NEW SPACER must be attached to the sensor face before installation. If the sensor is being replaced, confirm that the paper spacer is attached to the face of the new sensor Crankshaft Position Sensor and Spacer

    Install sensor in transaxle and push sensor down until contact is made with the drive plate. While holding the sensor in this position, install and tighten the retaining bolt to 12 N·m (105 in. lbs.) torque.
    Connect crankshaft position sensor electrical connector to the wiring harness connector.
    Attach connector to heater tube bracket.
    Install speed control servo. Tighten nuts to 9 N·m (80 in. lbs.) torque.

    May 22, 2010 | 1998 Chrysler Sebring

    2 Answers

    I have a 2003 Suzuki Aerio and it stopped running. It tries to start but can not get any fire to the spark plugs. Does anyone know what could be wrong?


    The fact that your car tries to start tells me that your starter, alternator and battery are all probably good.
    If none of your spark plugs are getting spark you probably have faulty spark plug wires, or distributor. Check these two things first. Make sure your wires are securely connected to distributor and plugs. To test them individually, take out the spark plug and leave it in the wire. Turn your car over and check for spark from the plug one cylinder at a time. Do not hold the plug in your hand or you will get a nice shock.

    Mar 11, 2010 | 2003 Suzuki Aerio

    Not finding what you are looking for?
    2003 Suzuki Aerio Logo

    127 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Suzuki Experts

    yadayada
    yadayada

    Level 3 Expert

    75051 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22095 Answers

    Boyet Soriano
    Boyet Soriano

    Level 2 Expert

    293 Answers

    Are you a Suzuki Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...