Question about Cars & Trucks

2 Answers

1996 chevrolet silver a do 2500 4x4 king cab long bed My break lights don't work both turn signals work emergency lights work fuses seem to be OK

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Cars & Trucks Master
  • 578 Answers

Best guess....brake switch behind brake peddle. You can replace or remove, spray eith penitrating oil and confirm operation with ohm meter prior to reinstalling.

Posted on Mar 29, 2014

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Cars & Trucks Master
  • 15,557 Answers

The pedal for the brakes has a switch above it on the connecting shaft. Look to see if it is loose, boken or disconnected. There may be more than one switch also.

Posted on Mar 29, 2014

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My dashboard light isn't working but my turn signal light, emergency break light and all other warning lights work, just not the backlight so I can see the speed i am travelling in the dark.


Did you try turning the wheel/knob next to the head light switch? It's the dimmer for your interior lights. Sometimes that happens and some ppl don't know about it. Not sure how familiar you are with it so thought I'd throw that out there.

Oct 28, 2012 | 2002 Chevrolet Malibu

1 Answer

Brake lights and turn signal don't work???


turn on the emergency flashers(e-flashers)if they work check the bulbs at the same time.if this is good then check the fuses.you may have a problem with the turn signal flasher needing replacing.this is a different flasher than that of the e-flasher,looks the same but a different flasher.usually located on or around the fuse panel under the dash.the brake light problem could be a misadjusted switch or a bad switch.the switch is at the base of the brake pedal and has two wires to it.one wire will have power all the time and the other wire will only have power on it when the brake pedal is pushed.if not then the switch will need replacing.check for broken wires at the switch as these sometimes break causing a problem.

Feb 08, 2012 | 1996 Pontiac Sunfire

1 Answer

Faulty turn signals


You might have a flasher in the wrong spot. It would be on the fuse panel. A little round silver tube about 1/2 long. Its probably bad. Mike. Rate 100% please.

Sep 19, 2009 | 1996 Chevrolet Tahoe

1 Answer

Checked all fuses-good, swapped bulbs-good, hazard lights-good, head lights good, turn signals-good but no brake lights. 1995 chevy silverado


Does the turn signals or hazards work in the rear?? Yes... it may be the brake switch or the turn signal switch (power goes from battery, to the brake switch then to the turn signal switch, then to the lights. No? .. again.. possibly turn signal switch or the wiring between cab and bed.

Jun 04, 2009 | 1996 Chevrolet K1500

2 Answers

The brake lights on my 1996 chevy 4x4 pickup do not work. the upper brake light on the rear cab does work.


CK THE BRAKE LIGHT SWITCH ON THE BRAKE PEDAL FOR POWER IN & OUT WHEN ON THE BRAKE.IF IT IS OK U MANY HAVE A PROBLEM WITH THE TURN SIGNAL SWITCH.POWER GOES THROUGH THE SWITHC TO THE REAR LIGHTS.WIGGLE THE TURN SIGNAL SWITCH WHILE STEPING ON THE BRAKE IF THEY LIGHT OP THE T/S SWITCH IS BAD.

May 05, 2009 | 1996 Chevrolet S-10 Pickup

1 Answer

Brake light/turn signal no not work on left side only.


check fuse number 7 in Engine Compartment Fuse Box , if its ok you need change turn signal switch

Mar 15, 2009 | 1996 Ford F150 Regular Cab

1 Answer

1996 carpice classic park lights fail


their is another fuse box in the engine compartment check that as well

Jan 23, 2009 | 1995 Chevrolet Caprice Classic

3 Answers

Blinkers stopped working


Your F--150 has 2 flashers, emergency and turn signal. Both are mounted on the fuse block under the dash. The turn signal flasher is mounted on the front of the fuse panel, the emergency flasher is mounted on the rear of the fuse panel. so replace the turn signal flasher should solve the problem. Let me know how it goes.

Oct 20, 2008 | 1996 Ford F150 Regular Cab

1 Answer

Rear brake lights


they are seperate fuses and also has trailer light relay for tow package models , look for trailer light relay fuse , with key on check them all while your there , if fuse is good , swap with another relay , if that will not work , check bulb housing for melted terminals , lastly have body control module ckecked

Jul 02, 2008 | 2005 Chevrolet Silverado

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

42 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...