Question about Ford Taurus

1 Answer

2005 forf tauras missfire

Scanner showing missfire,moves from cyl to cyl

Posted by on

  • 6 more comments 
  • rcward54 Apr 02, 2014

    it has the coil pack instead of indivigle coils. can that still be it.thanks

  • Anonymous Apr 02, 2014

    Could be but you do not replace parts in the hope you get it right All vehicle systems & components have to be tested & fail a test to first find a problem

  • rcward54 Apr 02, 2014

    had the coil, crank sensor, cam sensor, checked all ok. checked plugs&wires ok.fuel filter changed it was dirty,am running fuel injector cleaner thru it now.did get a code for the evap canister vent solenoid leaking but was told this couldnt be causing misfire

  • Anonymous Apr 02, 2014

    Their wrong on the evap solenoid ANY unmetered air is drawninto the combustion chamber when the evap purge valve opens Diagnose the evap system & make the required repairs

  • Anonymous Apr 02, 2014

    That evap soleniod will cause misfire,just not all the time

  • rcward54 Apr 27, 2014

    still having misfire.pulled a plug that i had the shp put in 20000 miles ago.the # shows its for an ohc engine not the ohv can this cause the misfire

  • Anonymous Apr 30, 2014

    You have to read what we type You need to dianose & repair the vap system leak,at will cause misfires only when that system run You know ou need he correct spark plug in any motor Your best to do your own work now you see the incompetance in the repair shop world

  • Anonymous Apr 30, 2014

    You said you have a code for the evap canister vent,has that not been resolved

×

Ad

1 Answer

Professional Scan Tool in Mode $06 ?

On a 2005 Ford I would say ALL of the ignition
coils are bad,they don't last more than 6 to 7 years

Not all coils show up as an OBD PO 300 Code or Mode $06
Misfire,some just spike the PCM at will & drive you crazy

All you can do is walk a new coil or replace them all

Posted on Mar 28, 2014

Ad

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
MrScary66613
  • 1990 Answers

SOURCE: 2000chevy blazer random cyl missfire number 1 cyl

Just to let you Know what you R getting into-I just got rid of My 2000 Blazer (THANK GOD)!!!! If you check out the Recalls and Complaints Online for the 2000 and Up Chevy Blazer you will be Reading for Months!!!! I am Chevy to the BONE and bought this for My Wife-It was GREAT for the first 15000 Miles and then Everything went Haywire! The Seats Broke, Lights quit, Tranny went Twice, Brakes Failed 3 Times, NEVER Ran Right again, Guages quit working, ON and ON and ON. GM will NOT honor these Recalls and Fixing them is REALLY Expensive. Just MY Opinion But, GET RID OF IT WHILE YOU CAN!!!! Took a BIG loss on Mine and Don't Regret it!!!!

Posted on Dec 30, 2008

  • 2 Answers

SOURCE: benz e420 multiple cyl missfire

also check and see if the updated Mass Air Flow sensor has been installed, these go bad all the time causing all kinds of weird misfires and other problems.

Posted on Jul 12, 2009

zappanut
  • 959 Answers

SOURCE: Why is scanner showing DTC P01365 Ingnition Coil #5 Control Circuit Low Voltage and have Missfire on #1 cyl

because you have a bad #5 coil, and a bad plug in the number one cylinder.
Or because your wires are leaking would do it too.

Posted on Oct 29, 2011

cassdvd9
  • 33 Answers

SOURCE: ran out of gas ran fine for about 2 days went to friends when leaving it died,started right back up,but shaking real bad like a missfire,checked and seems the coil packs r ok,

Sounds like something in fuel system is clogged form running to low on fuel if vehicle is old and fuel filter has not been replaced for a long time.
It does not take much but a small particle to clog injector or it could be fuel pump is going out. You need to check fuel pressure and change filter and also you might have to get fuel system flushed and you might just have replace injector at worst. Hope this helps

Posted on Oct 24, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

09 accent cyl 4 missfire, plug injetor coil all ok cyl comp test all within spec. changed pcm old one stopped workin alltogether. all no change,intermittent missfire


SWAP COIL LIKE FROM CYL NUMBER 1 TO 4 AND ROAD TEST UNDER LOADS IF CHANGE THE MISS TO CYL NUMBER 1 NEED A COIL OR BAD PLUG AT CYL NUMBER 4

Sep 02, 2014 | Cars & Trucks

1 Answer

Running rich


Hi Justin
you seems that you have a good idea about engines and injection systems, lets say that the computer see's rich exhaust and pulls back fuel mixture. creating misfire. why the engine is misfiring on one cylinder only??
my advice to you
1 search for a vacuum leak corresponding to the misfiring cylinder, like a manifold gasket or injector seal.
2, do a compression test for all cylinders, probably you have a burnet valve.
Good luck and let me know how it goes.

Mar 03, 2014 | Kia Sedona Cars & Trucks

2 Answers

2008 chevy impala cyl 5 missfire 3.5 eng


sounds like the only thing left is the valve lash. If the intake gasket was bad, it would most likely cause a vacuum leak and effect the overall performance of the engine. You may also notice some oil consumption as well. Also, verify the firing order is correct.

Oct 23, 2017 | 2008 Chevrolet Impala

1 Answer

Ran out of gas ran fine for about 2 days went to friends when leaving it died,started right back up,but shaking real bad like a missfire,checked and seems the coil packs r ok,


Sounds like something in fuel system is clogged form running to low on fuel if vehicle is old and fuel filter has not been replaced for a long time.
It does not take much but a small particle to clog injector or it could be fuel pump is going out. You need to check fuel pressure and change filter and also you might have to get fuel system flushed and you might just have replace injector at worst. Hope this helps

Oct 24, 2012 | Cars & Trucks

1 Answer

Why is scanner showing DTC P01365 Ingnition Coil #5 Control Circuit Low Voltage and have Missfire on #1 cyl


because you have a bad #5 coil, and a bad plug in the number one cylinder.
Or because your wires are leaking would do it too.

Oct 28, 2011 | 2001 Oldsmobile Aurora

1 Answer

E250 missfire 1 4 5 how fix it tankyou


WHAT SIZE ENGINE?
If it is 5.4 you need to buy one coil for each cyl. I just buy one and move it till miss goes away!

Apr 17, 2010 | 2002 Ford E250

2 Answers

2005 chevrolet k3500 6.6 duremax diesel with check engine codes po229 po300 po303 po304 came up after changeing fuel filter with water in fuel light came on also added fuel conditoner to fuel truck idles...


PO229 indicates tps circut inttermitent.
Po300 303 and 304 indicate missfires on cyl 3 and 4.. Was the fuel filter primed before starting the engine? If not ,remove and reinstall filter. Then prime filter with pump that is on fuel filter adapter. Once this is done restart and verify o/k

May 05, 2009 | 2005 Chevrolet Silverado 3500

1 Answer

Cylinder 5 missfire 1999 tahoe


How is the pressure in the fuel rail? a low pressure will cause erratic firing of the injectors - the further down the rail u get usually the worse the problem. If the fuel filter was not changed regularly or if the vehicle stood for a while, dirty fuel/standing fuel at some time in the recent past, this **** will accumulate in tyhe injectors. To avoid spending a loada cash, swap a few injectors around and see if the problem moves with the injector.

Jan 07, 2009 | 2004 Chevrolet Tahoe

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

110 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

fordexpert

Level 3 Expert

5537 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...