Question about 1995 Ford Escort

1 Answer

No brake lights.

The tail light brake lights don't work. But the high mount one does and the turn signals work

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Ford Master
  • 442 Answers

The turn signal switch is probably bad.

Posted on Mar 28, 2014

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

pippall
  • 1486 Answers

SOURCE: 2006 Ford Ranger. Rear passenger side tail light

Bad earth connection.Clean or replce wire.

Posted on Jun 18, 2009

  • 2 Answers

SOURCE: Brake light, Turn signal not working rear right 06' Focus

I have a 2000 ford focus no brake lights. with the brake lights the transmission would not go into drive .replaced the brake light switch checked fuse replaced turn signal switch with no results then i moved onto the wiper switch and replaced it as much to my supp rise it fixed the problems

Posted on Aug 06, 2009

  • 84 Answers

SOURCE: 1979 Ford Bronco 400M engine. Tail lights work but

The brake light and the turn signal are the same bulb. Most of the time if the bulb on the dash stays on it is because a bulb is blown and thats the way it tells you.

Posted on Feb 17, 2010

  • 27 Answers

SOURCE: 1992 ford ranger =no tail lights,,,,brake and turn signals work

try turning your lights on.....

Posted on Mar 18, 2010

alicantecoli
  • 22095 Answers

SOURCE: f350 dash lights and tail lights not working turn

either a switch problem or a fuse ,power supply is down somewhere?? BUT WHERE

Posted on Sep 03, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Brake light stays on and beeping while drivig


Year make and model helps, But, look at the lights. Are the tail/brake lights on, but not the high mount brake light? Replace the turn signal switch in the column. If the high mount is on. It could( most likelyy) be the brakes switch at the brake pedal. Could also be a shorted wire to power.

Jul 08, 2016 | Cars & Trucks

1 Answer

Brake light is working but not the tail light?


There are three fuses involved.
There is a 25 amp fuse before the brake switch located in the fuse box under the hood. Then there are two 15amp fuses after the brake switch in the box inside the cabin. One is for the lower brake lights and the other is for the high mount light and the trailer connector.
You would need to know if the 15amp fuse for the lower lights has power when the brake pedal switch is applied.

Feb 01, 2014 | 2004 Cadillac Escalade Esv

2 Answers

I have 89 bronco 2 my brake lights turn signals both work my tail lights don't work have check fuse n blubs what might be the problem


The turn signals and brake lights use the same circuit and filament in the bulbs. The tail lights are on the other circuit which comes from the headlight switch.
Do you have power on the tail light fuse ?

Feb 25, 2013 | 1987 Ford Bronco II

1 Answer

Turn signal,brake lights not working


I would check for voltage at the turn signal switch. The brake lights go thru the turn signal switch, except for the high mount light.

Jul 24, 2012 | Cars & Trucks

1 Answer

High mount and right rear brake light out. high mount is blown but the other 3 are fine. Can the high mount prevent the other brake light from functioning?


Nope, high mount comes directly from the brake switch, the other two come from the brake switch to the turn signal switch then to the back, seen a couple of the circuit boards bad in the tail lamps, if one side is working good try plugging the good side into the other side and see if it still works, if so its the tail light.. P.S. if vehicle has trailer wiring double check that too, usually that's a huge issue...

Jun 15, 2012 | 2002 Jeep Grand Cherokee

1 Answer

2001 Explorer Sport Trac, Turn Signal, Tail lights work but not brake lights on either side


check brake light switch on brake pedal arm. Does high mount stop lamp work?

Aug 06, 2011 | 2002 Ford Explorer Sport Trac

1 Answer

Reverse lights don't work


If obvious have been checked aka bulbs not being burnt out.
Check as well your bulbs in the HIGH MOUNT brake light.
All your lights even though seperate run on some of the same curcuits to the signal switch up front.
If there are no problems with the brake light I would then suggest looking at your trailer wiring if your truck is equipped with it. I had a problem with my turn signals and it ended up being my trailer wiring.
As well yours as mine did has a curcuit board on the tail light.
Maybe your local GM dealer will let you borrow a new one to see if that solves the problem.
I work at one so they let me do that.

Jul 09, 2011 | 1995 GMC Sierra C1500

3 Answers

Tail lights and brake lights are combined. I have tail lights but no brake lights. fuses look good.


No they are different systems going to the same place, the tail lights use one fillament in the bulb and the brake and turn signal use the other, a couple things to check, brake light fuse, brake switch (located on the brake peddle) check for power, I have also run into the 4 way flasher that were the problem, more than likely the brake switch

Apr 14, 2011 | 1997 Chrysler Sebring

2 Answers

96 monte carlo rear window brake light works but not brake lights. tail lights work, blinkers work, replaced brake switch and bulbs still not working


This is a common GM specific problem. Your turn signal switch contains an elaborate networking device that has to cancel brakelights while running a turn light. Often times the ground within the turn signal switch is lost causing your situation. After investigating such other possibilities as fuses and loose grounds it may become necessary to replace the turn signal switch. Thank you, Dana

Sep 21, 2009 | 1998 Chevrolet Monte Carlo

Not finding what you are looking for?
1995 Ford Escort Logo

32 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

74896 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5467 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...