Question about 2005 Renault Laguna 1.8

Open Question

Serv light on all the time

Serv /seat belt light onall the time car runs ok

Posted by on


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

My 1995 mercedes Vito 113 just stopped running while driving along the road. I was accelerating and all of a sudden it stopped runnning, the dash lights all immediately came on.

run the fault codes
could be a broken timing belt or chain
could have blown the main power fuse next to the battery ( around 80 amps ) and that would have switched everything off

Sep 29, 2016 | Seat Cars & Trucks

1 Answer

Toyota Echo 2003 SRS light with ABS light blinking instead of Seat Belt Light

When you sit in the seat and put the seat belt on does everything work ok . If so look to the fact that you are required to wear a seat belt and the fact that you are not might be the problem.

Mar 09, 2014 | Cars & Trucks

1 Answer

2005 town and country touring i want to disconnect the seatbelt warning light and chime?

1. Turn the ignition switch to the off position and buckle the seat belt
2. Turn the ignition switch to run (engine does not need to be running), wait for the seat belt light to turn off.
3. Within 60 seconds, unbuckle and rebuckle the drivers seat belt at least 3 times, ending with the seat belt buckled.
4. Turn the ignition key to the off position. A single chime will sound to signify that you have successfully completed the programming.

It can be reactivated by repeating these steps.

The alert will be deactivated but the warning light will continue to stay on will the belt is unfastened.

Feb 13, 2013 | 2005 Chrysler Town & Country

1 Answer


Forget the dinging & just use the vehicle as you
you would any vehicle

If you have a problem provide some detail, as that
question is strange in it's self

You have to have your seat belt on

All vehicles ding when the key is turned on
They are reminders to do certain things,wear
seat belt,remove key,turn off lights,etc.

Nov 10, 2012 | Cars & Trucks

1 Answer

I have a 1994 mercedes SL320 Conv. the seat belt light on dash will not go out. any suggestions

faulty seat belt buckle or wiring, first check wiring for seat belt buckle if wiring and connectors are OK require new belt buckle, is this information helped you?

Oct 26, 2010 | Mercedes-Benz SL65 Cars & Trucks

1 Answer

Seat belt light comes on but the belt is engaged...could it be a fuse?

faulty seat belt sensor- switch. Check the wires running beneath the driver's chair if shaved or disconnected. If ok, replace the seat belt lcoking mechanism.

May 25, 2010 | 1998 Toyota Sienna

1 Answer

My 1993 Elantra's seat belt audible/light indicator continually goes off, even when belts are buckled. The only time light/sound indicator turn off is when the passenger side door opens.

There is a switch in the seat belt latch that is probably worn out and it is sensing that the seat belt is not being used.
If this is a problem it should be easy to fool it into thinking the seat belt is connected by finding the wires that run to that switch and connect them together.

Jul 25, 2009 | 1993 Hyundai Elantra

Not finding what you are looking for?
2005 Renault Laguna 1.8 Logo

Related Topics:

18 people viewed this question

Ask a Question

Usually answered in minutes!

Top Renault Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22306 Answers

xxxxxx xxx

Level 3 Expert

4889 Answers


Level 3 Expert

77514 Answers

Are you a Renault Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides