Question about 2005 Opel Meriva 1.6

1 Answer

Camshaft timming how do i set the cam timming

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 128 Answers

Down load a repair manual online , you may have to pay a little but you will find all the answers you need , it may take forever to explain how to do it on here .

Posted on Mar 28, 2014

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2004 set camshaft gears on duel overhead cam 2.4 motor to replace timming belt


DIY? You need a repair manual. You will want one next time, and just to learn more about your systems.
I recommend a manual from your favorit Auto partsstore.
You may be able to find one on filepeep.com or
manualslib.com

Mar 22, 2015 | 2004 Dodge Stratus

1 Answer

Where is the crankshaft sensor location on lanos 2001 ? I changed my camshaft position sensor and the timing belt, but the engine light still on with the same code and the mechanic said it's the...


both the single cam and twin cam engines use the teeth on the crank pulley for crankshaft sensor which is bolted in bracket attached to block near oil pressure switch, hopefully you didnt dent(bent) teeth on crank pulley from dropping it or putting pulley down a bit roughly because they bend really eazy.
also is the crank pulley bolted up in correct position?
is the timming belt tension correct from when you did cam belt?
if tension wrong or timming out by a tooth it will set crank sensor codes, even possibly cam sensor codes and if you get timming out more than 3 teeth either way(advanced or ********) you will bend valves.

stevenhurc_26.jpg

Sep 05, 2011 | 2001 Daewoo Lanos

1 Answer

4jx1 camshaft marks on isuzu trooper 2001 3,0 dohc engine


the timming gear that the belt runs on has a mark (V cut in gear) to rear cover at about 12 o clock and crank pulley has timming mark for top dead centre, both cams have cut outs in rear that a special tool (camshaft stopper 5-8840-2592-0) locks into to hold cams in correct position, but can do without this, if the cam belt gear is off, the keyway should be at 12 o clock. the marks in the camshaft gears (dots) is for assembly of sissor gears to solid gears on camshafts that run together and they should match up only if you had this appart.

stevenhurc_12.jpg no.1 is timming mark

stevenhurc_13.jpgthis is the locking plate tool

Apr 19, 2011 | 2001 Isuzu Trooper

1 Answer

How do you set the timming on a 2.3 when your putting the new timming belt on


The IGNITION timing on your Ranger is computer-controlled and is not adjustable.


Should the camshaft drive belt/timing belt jump timing by a tooth or two, the engine could still run; but very poorly. To visually check for correct timing of the crankshaft, auxiliary shaft, and the camshaft follow this procedure:
There is an access plug provided in the cam drive belt cover so that the camshaft timing cam be checked without moving the drive belt cover.
  1. Remove the access plug.
  2. Turn the crankshaft until the timing marks on the crankshaft indicate TDC.
  3. Make sure that the timing mark on the camshaft drive sprocket is aligned with the pointer on the inner belt cover.

Never turn the crankshaft of any of the overhead cam engines in the opposite direction of normal rotation. Backward rotation of the crankshaft may cause the timing belt to slip and alter the timing.
REMOVAL & INSTALLATION

See Figures 1, 2 and 3


0996b43f80211842.jpg enlarge_icon.gifenlarge_tooltip.gif

Fig. Fig. 1: Timing belt cover on the 2.3L and 2.5L engine


0996b43f80211843.jpg enlarge_icon.gifenlarge_tooltip.gif

Fig. Fig. 2: Timing belt assembly on the 2.3L and 2.5L engine


0996b43f80211844.jpg enlarge_icon.gifenlarge_tooltip.gif

Fig. Fig. 3: Releasing the timing belt tensioner using a special tool

  1. Rotate the engine so that No. 1 cylinder is at TDC on the compression stroke. Check that the timing marks are aligned on the camshaft and crankshaft pulleys. An access plug is provided in the cam belt cover so that the camshaft timing can be checked without removal of the cover or any other parts. Set the crankshaft to TDC by aligning the timing mark on the crank pulley with the TDC mark on the belt cover. Look through the access hole in the belt cover to make sure that the timing mark on the cam drive sprocket is lined up with the pointer on the inner belt cover.

Always turn the engine in the normal direction of rotation. Backward rotation may cause the timing belt to jump time, due to the arrangement of the belt tensioner.
  1. Drain cooling system. Remove the upper radiator hose as necessary. Remove the fan blade and water pump pulley bolts.


Dec 11, 2010 | 1995 Ford Ranger Supercab

2 Answers

Diagram for timming belt on 2002 ford focus 2.0ltr


there isnt marks!the cam pulleys have do nothing with timing!remove the valve cover and see in the other end of the camshafts and find two eccentric cuts!turn the crankshaft to the top dead point on the cylinder 1 the two cuts must be in the same line on the upper or lower side.you need aspecial tool to lock the camshafts and another to lock the crankshaft!this is the timing procedure!now you can change anything you want!note!the cam pulleys are conejointed to the camshafts!no marks no pins no safe pins etc.isnt difficult but complicated simple!

Jan 23, 2010 | 2002 Ford SVT Focus

1 Answer

2002 Hyundai Acent 1.5 sohc,need info on cam timming


didnt you mark it before you removed the old belt??

Nov 01, 2009 | 2002 Hyundai Accent

1 Answer

Need timming diagram for 2.0 mucury mistque veriable cam timming


752f027.gif
91053g61.gif
align the camshafts

91053g64.gif
crankshaft before removing the old belt

91053p66.jpg
91053g62.gif

Aug 25, 2009 | 1999 Mercury Mystique

Not finding what you are looking for?
2005 Opel Meriva 1.6 Logo

Related Topics:

133 people viewed this question

Ask a Question

Usually answered in minutes!

Top Opel Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Brad Brown

Level 3 Expert

15478 Answers

george parkes

Level 3 Expert

975 Answers

Are you an Opel Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...