Question about 2002 Mazda 626

Open Question

Timing is off and it wont start

Cant find timming marks

Posted by on

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

1994 mazda b2300 changed the head and now no spark and wont start. timming marks are all lined up

i got a94 2300 5speed and i change coils packs module crank trigger and it does not have spark after i change all that and check every fuse an ignition swicth i got no spark who cant help me

Dec 30, 2011 | Mazda B-Series Cars & Trucks

2 Answers

What the timming marks set at on a 97 ford escort 2.0 l

here you go...
let me know if there is anything else you need

Apr 12, 2010 | 1997 Ford Escort

2 Answers

How do I replace a timing belt in a 2000 Ford Focus

cant get the timming righ and ther is no markes for the timming

Mar 10, 2010 | 2000 Ford Focus

2 Answers

How can i time a 76 sbc 305 if i cant get the car started and don't have timing light just need to get it started

Find cylinder one
Crank the engine with the plugs out,
feel for the compression stroke
mark the timinig mark on the crank.
Set your distributer with the cap off.
Or you can pull the valve cover and watch the valves for the timming mark.
that should get you close enough to get it started then adjust.

Feb 07, 2010 | Chevrolet Camaro Cars & Trucks

1 Answer

Cranks, but no start. spark and fuel good, no

cam timming is possibly out due to gear reduction set up in heads
suggest remove rocker covers and make sure cam lobes are in this possition as well as all other timming marks luckily these engines (V6) are free wheeling (wont bend valves) set up like pic below


Nov 03, 2009 | 1998 Isuzu Trooper

1 Answer

Timing marks

you should have timming marks on the front engine block. if you see it you will need a timming light to set it very cheap to buy. if you do not see any timming marks and you have a distributer losen it a little but with the car running. now with the car running turn the distruber left or right until you hear and feel the car idle high. once you feel it idle low go back up until it idle high and keep it there and tighten the distruber back. turn the car off and try starting it back up. it should start right on time with the correct timming and idle. good luck

Jul 08, 2009 | 1995 Chevrolet Monte Carlo

1 Answer

Timing marks for a vw 2000 jetta vr6

well learn how to time engine with no timing marks,its easy .look on end of cams for a slot or some sort of mark on the cam bearings caps .If you cant find anything then no 1
piston at the top and both valves closed with cam lobes in the air so to speak.dont forget to turn crank twice with a rachet before you evan think of trying to start engine.

Apr 16, 2009 | 2000 Volkswagen Jetta TDI

1 Answer

2002 jeep liberty timming marks

you cant without proper computer tools

Jan 26, 2009 | 2002 Jeep Liberty

Not finding what you are looking for?
2002 Mazda 626 Logo

Related Topics:

50 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts


Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8215 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides