Question about 1993 Mercedes-Benz 190

Open Question

Turn signals hazards not working

Turn signals stuck on key out of ignition

Posted by Anonymous on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My turn signals sometimes will quit working then I have to hit the hazard lights button leave it on and then turn my turn signals on then they work what causes this to happen


When the turn signals quit working pull up , down , front to back an back to front on the turn signal switch handle . Do they work when doing this ? Pontiac had bad switch . The power for the turn signals goes through the flasher / hazard module . Could be the switch or the module.
The HAZARD LPS fuse in the left hand instrument panel (LH IP) junction block supplies battery positive voltage to the flasher module, which is part of the hazard switch assembly. The TURN LPS fuse in the LH IP junction block supplies ignition positive voltage to the flasher module. The turn signal lamps may only be activated with the ignition switch in the ON position. When the turn signal switch is placed in either the left or right position, current flow is from the flasher module's output to the turn signal switch assembly. The flasher module then sends an on-off voltage signal to either the left or right turn signals and their instrument panel cluster (IPC) indicator. When the hazard switch is pressed, all the turn signal lamps will flash including both IPC turn signal indicators.

Mar 12, 2016 | 2001 Pontiac Grand Am GT

1 Answer

I have a trailer hooked up to my enclave the right turn signal blew out on trailor now my right turn signal on my truck dont work and my key wont come out of igntion


How to get your key out of the ignition if it gets stuck ...

? 1:21
https://www.youtube.com/watch?v=bctxs0Yj4Wc
Oct 24, 2012 - Uploaded by stanley saintlouis
How to get your key out of the ignition if it gets stuck! ... Chevy Impala Monte Carlo Buick Pontiac - Won't Shift ...

Key Stuck in the Ignition ' Here's What to Do

locksmith-orlando.org/key-stuck-ignition-heres/
Nov 3, 2014 - One of the most stressful moments as a driver is when your Key Stuck inthe Ignition and you are in a hurry. You can't simply leave your key in ...

Pontiac Grand Prix Questions - when I put my car in park it ...

www.cargurus.com > Questions > Pontiac > Grand Prix

CarGurusJul 28, 2013 - She put the actual key in the ignition and almost could pull it out. She called ... ignition stuck in an on position stering column locked 1 answer.

key stuck in ignition? ' Yahoo Answers

how do i fix my turn signal/blinker? - CarGuruswww.cargurus.com > Questions > Dodge > Ram 1500CarGurusMay 3, 2013 - My right rear turn signal is not working. ... Thanks for the input. just parked my truck for the night and realized the hazard light does not flash on ...Clearlake is the poorest place to live in California...we don't have pavement or ...GM Turn Signal Problem Fix - Directional Relay ... - YouTube? 5:38https://www.youtube.com/watch?v=y4QVUBVVVpIMay 3, 2014 - Uploaded by Steve O+Steve O I just change my turn signal switch it was workingthen it stop. ... store to see or can you help I'm having all those problem you said with my truck. .... leds all the ambers flash at the same time when I hit the left or right.


Jan 11, 2016 | Cars & Trucks

1 Answer

2001 grand marquis tail lights not working , turn signals not working , hazards not working


You have a lot going on there.possibly the lighting control module but only a guess without further diagnosis. Take it to a reputable garage that deals with electric concerns a lot..but they may tell you to bring to deal

Mar 17, 2014 | Mercury Grand Marquis Cars & Trucks

1 Answer

The flasher unit (turn signal and hazard) starts the clicking sound as soon as the ignition key is turned on.


sounds to me the switch is bad, as if its stuck in the turn signal position, could be the relay or blinker faulty. Replace the blinker/relay and if thats all good, its your turn signal switch.

Dec 16, 2013 | 2003 Hyundai Tiburon

1 Answer

Hasards dont come on on a 2000 isuzu trooper


No need to panic-this can SEEM TO be caused by a couple of things, but it is fairly simple to determine exactly what is causing this flasher circuit condition.
First, turn on your flashers, however you have to do it, and walk around the truck to check that all bulbs are working (at least one on each corner). Turn signal and hazard flasher relays are thermal circuit interrupters and are current sensitive and will not work properly with too few or too many bulbs in the circuit. (This is usually a big problem when switching over to LED lamps, as LEDs only draw a fraction of the current that the bulbs do. This causes the relay to either not flash at all or flash very fast and triggers warning circuits on newer cars) If there is one or more bulbs out, they must be replaced.
That being said, I doubt that alone is your problem. Here is a general automotive wiring primer aimed at the turn signal, hazard, stop, and running lights on most all motor vehicles.
Hazard flashers are required by D.O.T. safety standards on all motor vehicles that may ever be used anywhere near a public road. They are also required to be able to be used without the ignition key. This means the flasher circuit for hazards is fed thru a fuse that connects straight to the battery and is energized at all times.
Turn signal circuits often share the same flasher relay as the Hazards, even though the power for them is switched through the ignition key. Power for directional blinkers connects to a fuse, then the ignition switch, then to the battery.
So, if you have to turn on the turn signals (is the key on?) to get hazards to work, that means they are not getting power direct from the battery, but can get it when the turn signals are on because they both use the same relay. This is usually the case on all vehicles; If 4-way flashers and turn signal are both on at once, the 4-ways override the turn signal and force all signal bulbs to flash. The turn signal never forces one side of the hazards to stop blinking.
So, where does that leave us? You simply have a blown fuse, my friend. The hazard lamps fuse may also power the cigarette lighter, dome light, or other "always on" accessories. This varies with make & model, but the Hazard Lps fuse is usually well marked in the fusebox. If the fuse blows again shortly after being installed, do not put in a larger one! Try one more. If it also blows immediately, there is a problem with the wiring, or a bulb could be in wrong and shorting to the socket ground. Try removing all the flasher bulbs and trying the switch(it won't flash or "tick-tock") again. If the fuse does not blow, you have found the problem. Good hunting!

Apr 15, 2013 | 2000 Isuzu Trooper

1 Answer

1992 Ford Ranger Turn signal/Hazard light issue


Can you just check to make sure the ignition key switch is not staying over to far and not backing off when you try to start it. I had a truck that did that and it messed up my turn signals until I brought the key switch back a little after starting it. Just a simple idea. Be kind with your rating for me. Raz

Apr 19, 2010 | 1992 Ford Ranger

1 Answer

1994 Ford Probe GT - 1. Key stuck in ignition 2. Hazards on


Hello , I am a locksmith in Az. The Ford, Chevy& Dodge igns up until 2004 all had this problem. You will need a new updated "side-bar free" ignition to cure that problem. If you decied to splice wires , yes it will work, but you will need to be extra EXTRA CAUTIOUS IN RE-ATTACHING WIRES AND MAKE SURE THAT WIRES ARE IDENTICAL IN COLORS. (not yelling) just making sure you understand the importance of this procedure.

Quinn

Jan 23, 2010 | 1994 Ford Probe

1 Answer

Haz flashers wont work but blinkers do


There are 2 seperate flashers 1 for turn signals and 1 for hazard.The hazard flasher is located in the convenance center the turn flasher in the fuse box. Also seperate fuse's for each. One battery circuit for hazard Ignition for turn signals.Check fuse for hazard,if good try swapping in the turn signal flasher and see if hazards work.They use the same flasher unit.

Aug 20, 2009 | 1993 GMC Safari

2 Answers

Turn signals and emergency flashers stopped


they are under the dash, but its highly unlikly that both would go bad at the same timeyour promlem is probly in the steering colum

Mar 05, 2009 | 1997 Mercury Sable

1 Answer

There is no indicators working on the car the message trip computer system is stuck on the same message and and cannot toggle between average speed etc. the message and dashboard lights are very dull. the...


The hazards most likely still work, but when they key is out, it won't flash on the dash, but will outside.

As for the indicators and trip...could be either a steering wheel module to a turn signal stalk issue.

Were you having problems with the turn idicators acting weird before?

Aug 05, 2008 | 2005 Volvo S60

Not finding what you are looking for?
1993 Mercedes-Benz 190 Logo

Related Topics:

18 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercedes-Benz Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

yadayada
yadayada

Level 3 Expert

76164 Answers

Michael Contreras
Michael Contreras

Level 2 Expert

166 Answers

Are you a Mercedes-Benz Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...