Question about 2010 Chevrolet Tahoe

Open Question

Co161 comes up with brake switch fault

Posted by Anonymous on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

08D Volkswagen Passat, parking brake fault coming up on the monitor of car


brake light fault lights can be activated from worn pads , hand brake still on or switch out of adjustment or low oil in brake master cylinder

Oct 25, 2015 | Volkswagen Passat Cars & Trucks

1 Answer

Esp light flashing


There could be one or more of several reasons why the ESP light has illuminated on your Smart car...
For example, you could have a fault with dirty reluctor rings on the Abs system - faulty Abs sensor/ s ... a fault with the brake light switch - a fault with the steering angle sensor -- even a software glitch / issue in the control system...
The above are known issues that can and do cause the Esp light to come on.
What you will have to do is have the car connected to a dealer diagnostic machine - This will run a full diagnostic test and fault code read - to see why the Esp light has come on and quickly and efficiently find the right cause - and then it can be sorted out, whatever it transpires to be.
You really cannot do much on a Diy basis on these for this fault. You can check the reluctor rings as mentioned above and the wiring to the ABS sensors. The abs light will often come on to with the Esp light - but not always. Dont check these these things with the Ign On....
Too, you can check to see if the brake lights are working - if they are not - thats a definite indication of brake lamp switch failure which will cause the Esp light to come on - but while its worth checking - even if the lights do work - it doesn't always follow the switch is ok - it has a dual function - brake lights and engine management circuitry...
At which point, if you have found nothing - you will have to have the diagnostic done as above to find the fault.

Mar 27, 2012 | 2001 Volkswagen Sharan

1 Answer

I have a 2007 Dodge Grand Caravan and my cruise control does come on, but with it a brake indicator light comes on as well. Why would this be?


Check to ensure your rear brake lights are working. If there is a fault in the brake light switch at the pedal then this is also what cuts out the cruise control. If you have no rear brake lights then replace the switch.

Jan 18, 2011 | 1998 Dodge Grand Caravan

1 Answer

The brake light doesn't come on. the taillight brake lights do not come on. I replaced the bulbs. My rear lights come on, just not the brake lights.


the fuse is at fault. if all good on the fuse, bridge the 2 wires at the brake pedal switch together and see if they come on, if they do, refresh the switch.

Jun 13, 2010 | 2000 GMC Jimmy

1 Answer

ABS light on at start and brake light flashing


replace the brake switch.i has seen in gm cars if brake switch is open not working.it will cause anti lock brakes stop working.see if anti lock brake module detect fault in brake switch circuit .anti lock brakes stop working.your brake light and abs light will come on.if this dont help.take it to dealership.

Jul 12, 2009 | 1999 Audi A8

2 Answers

Third brake lights work but no rear brake lights


Check the switch on the brake pedal, connect the wires to each other and if the lights work then the switch is at fault, if they do not then check fuses, wiring etc.

Jun 16, 2009 | 1998 GMC Sierra

1 Answer

'99 Ford Escort...won't come out of park...it starts and runs...won't shift


Make sure the brake lights work if not then its a fault with the switch or a fuse. If they are then possible fault with release solenoid at lever, though i would reckononit being brake light switch

Good luck davelee

Mar 05, 2009 | 1998 GMC Jimmy

1 Answer

97 honda accord v6 luxury cruise control not working


Yes, it probably is the brake switch. It must be working properly for the cruise control to work. If the part you got did not come from a car with cruise control, it will only have two electrical posts and not the four that you need.
If it is the right part, it must be turned in until the button is pushed completely, but not so far that it begins to actuate the master cylinder. Please report your results.

Jun 11, 2008 | 1997 Honda Accord

Not finding what you are looking for?
2010 Chevrolet Tahoe Logo

Related Topics:

33 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8516 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...