Question about 2007 Volkswagen Jetta 2.5 Sedan

4 Answers

Jetta parking brake

Parking break not clicking when applied, no parking break

Posted by on

Ad

4 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Habit-Forming:

    Visited the website for 3 consecutive days.

  • Volkswagen Expert
  • 179 Answers

Remove the center consol and you will see the gear for the parking brake.if the button move free the lower gear need to be clean and lub.If the button stuk pusht down ,pull the handle and clean the old grease lub and assamble together

Posted on Mar 28, 2014

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Habit-Forming:

    Visited the website for 3 consecutive days.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 60 Answers

You probably need to replace the parking brake it could be broken or ceased. More likely broken if you can move the actuator (petal or hand).

Posted on Mar 28, 2014

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Volkswagen Master
  • 3,278 Answers

You need to remover the cover on the hand brake and check the ratchet pin. if you pull it up all the time without pushing the pin in it can wear away the the ratchet. also there can be a problem with the spring these can snap. also there could be something in there stopping the ratchet from moving in to the right place.

Posted on Mar 28, 2014

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Legend:

    An expert who has written 200 answers of more than 400 characters.

  • Expert
  • 331 Answers

Your car should have an E-brake engage/release lever. Please inspect the push button on the end of the lever. Does the button depress and release correctly? My guess is that the lever needs to be repaired or replaced. Maybe the internal spring has broke and the button wont release. If the button doesn't release, the ratchet wont engage. Write back and let me know what you found or if you have other questions, good luck.

Posted on Mar 28, 2014

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2003 2.0 VW Jetta automatic wont shift out of park


Could be the brake switch or the shifter lock solenoid.

Jan 21, 2014 | Volkswagen Jetta Cars & Trucks

2 Answers

Stick is lock on park cant put on drive by pressing break wy


have friend bump car just a little to move it apply break put on parking break
start vehicle press brake take out of gear let off emergency brake
you park on hill so this is called shift lock always use the emergency parking break when on hill so you dont get shift lock

Nov 09, 2013 | 2004 Ford Freestar

1 Answer

1998 dodge dakota break light is on in dash


Sounds like you need a brake job performed and the system completely checked over. Check the brake fluid level in the master cylinder, and also make sure your parking brake is not applied by pulling the parking brake release lever.

Oct 07, 2012 | 1998 Dodge Dakota

1 Answer

2006 2.5 vw jetta automatic vehicle will not shift out of park gear


Make sure you have brake lights, they system must see the brakes applied before the park lock will release. make sure the fuse you installed is good and has 12 volts at both sides of the fuse.

Sep 07, 2012 | Volkswagen Jetta Cars & Trucks

1 Answer

Jetta break light is on and when driving it beeps??


It might be the parking brake warning - you may need to check the parking brake switch.

Sep 03, 2012 | Volkswagen Jetta Cars & Trucks

1 Answer

The brake light is continually on, on the dash of my 2006 VW Jetta. The emergency brake is all the way down, and yet the brake light is on, and there is a non-stop beeping sound while driving.


If your ABS light is light it could mean several things. First check to make sure that your parking break is all the way down. Secondly, it could be cause by you not having enough fluid for your breaks.

Aug 10, 2011 | 2006 Volkswagen Jetta

1 Answer

Why does the parking break light stay on in my 97 Olds Cutlas Supreme. I have checked the level of the break fluid and it is full. I did have new break lines put in last year. I did have to slam on my...


Apply the parking brake with the vehicle parked, engine turned off and transmission in Park. Release the parking brake completely, then apply it again, and ensure that it is fully released. Turn the ignition on, check to see if the Parking brake warning light is on. If it is NOT on, apply the parking brake and check to see if the warning light comes on. If the light come ON wihen the Parking brake is applied,.....fully release the parking brake and check if the warning light goes OFF. If it does NOT go off, then an adjustment is needed at the parking brake switch.

Jan 09, 2011 | 1992 Oldsmobile Cutlass Supreme

2 Answers

Gear shift won't move out of park


safety switch on brake pedal. common cause is a wire breaking off. there are 1 to 2 wires going to this switch. It is located on the brake pedal bracket above the foot pad.

Jul 19, 2009 | 2003 Volkswagen Jetta TDI

1 Answer

Emergency brake does not apply tight enough 1999 Jetta.


yes remove boot cover on parking brake lever and adj double cable screws to where it stops on 3 clicks then replace lever boot.

Jun 27, 2009 | 1999 Volkswagen Jetta

2 Answers

My 1997 vw jetta gls won't go in any gears


you should start by checking your brake saftey switch. you have to apply the brake when shifting from park if it is bad it will not allow you to shifft from park.try the cheapest easiest first.

Jan 31, 2009 | 1997 Volkswagen Jetta

Not finding what you are looking for?
2007 Volkswagen Jetta 2.5 Sedan Logo

132 people viewed this question

Ask a Question

Usually answered in minutes!

Top Volkswagen Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

yadayada
yadayada

Level 3 Expert

76846 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8572 Answers

Are you a Volkswagen Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...