Question about 2003 Kia Sedona
Log on to kiausa.com
Very good site with guided fault seeking and all info you need.
Posted on Apr 10, 2014
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Oct 19, 2014 | 2007 Ford Explorer Sport Trac
Apr 12, 2014 | Nissan Pathfinder Cars & Trucks
Dec 13, 2012 | Hyundai Motor 1998 Accent
EVAP Vent Control Solenoid Circuit Malfunction
Vent solenoid circuit open, shorted to ground or to power (B+).Vent control solenoid is damaged or has failed..PCM has failed.TSB 00-060 (7/00) contains information related to this code.Trouble Code: P0455
EVAP System Gross Leak (0.080") Detected
.EVAP control system pressure sensor is damaged or has failed.EVAP purge solenoid or canister vacuum line loose or off.EVAP purge solenoid is damaged or has failed.EVAP emission canister is dirty, restricted or full of water.EVAP canister vent control valve is damaged or has failed.Fuel tank cap loose, missing or it is the wrong part number.Fuel tank temperature sensor is damaged or has failed.Fuel tank vacuum relief valve is damaged or has failed.Large leak in the EVAP canister or in the fuel tank area.ORVR system is damaged or has a large leak in a component.Refueling control valve is damaged or has failed.Vacuum hose leaking between intake manifold and Purge valve.Here are the codes,take part back and get refund.
Dec 03, 2012 | Cars & Trucks
Evaporative Control Vent valve has only one purpose. It closes in order to seal the vent so the EVAP system can pressurize and ensure there are no leaks. Evap vent valve is usually supplied Batt. voltage with key on. The ECM's driver controls the ground, and when grounded, activates the valve (closing it). If the ECM detects a short to ground, and open,or a short to battery voltage on the control circuit, P0446 will set. Code also may refer to ECM detecting that EVAP system is unable to achieve or maintain
vacuum during test.
Dec 27, 2011 | 2005 Chevrolet Silverado 1500 2WD
Aug 06, 2010 | 1996 GMC Jimmy
Apr 17, 2010 | 2001 Toyota Camry Solara
Apr 05, 2009 | 1997 Toyota Camry
29 people viewed this question
Usually answered in minutes!