Question about 2005 Rover 75 1.8

1 Answer

Signs of a clutch going out

The clutch is misbehaving sometimes gears engage sometimes not. If I pump it and /or engage with engine off it works mechanic already fitted 200 gbp worth of pipes to fix prob now tells me 300 more cos air is getting into clutch help pls and thank you

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Master:

    An expert who has achieved Level 3.

  • Rover Master
  • 354 Answers

If gbp is what I believe it is, you have been terribly taken advantage of. Tell the chap to sell his tools and open up a fish n chips. Honestly, you have paid enough to have the problem fixed. It sounds like the hydraulics are failing and that's a mattervofca master and a slave cylinder with a piece of steel tubing connecting them. If you bleed the system and it works for a while you are getting air in the system. I would never pay for a car that wasn't fixed!

Posted on Mar 27, 2014

Testimonial: "thank you so much for replying but do you have any idea what I do next - "chip shop man" said no way to fix it as it is do you think this is correct"

  • Vincent Competello
    Vincent Competello Mar 28, 2014

    What did this man do for the original repair?

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Mid sixties Ford 4000. Suddenly decided to make severe grinding noise when trying to engage gears and cannot engage gears. Weirdly this does not always happen. Gears engage OK when engine not running


Hello, you may have more success in the proper category of lawn or farm stuff. Fortunately I have same Tractor. Sounds like clutch fork is not moving clutch the same way each time you press clutch. Could be clutch needs play removed. Sometimes there is a pivot ball for the clutch fork to rest on. When the pivot ball is worn the clutch fork can rock. Also remember RPM to give gears time to stop spinning before changing gears.

Jan 21, 2017 | Ford Cars & Trucks

1 Answer

Car turns off when engaging clutch to a lower gear


Check the following:
- Thrust bearing, clutch.
TEST: Pull up the hand brake. Start the engine and let it at idle speed.
Depress the clutch pedal, put the car in 1st gear, while keeping the clutch pedal depressed. If the gear lever hesitates or produce any abnormal noise, replace the clutch thrust bearing.
- If the gear lever shifts smoothly, clean the throttle body, idle air control valve and perform idle speed learn learn procedure.
- Check the valve clearance.

Apr 11, 2014 | 1992 Toyota Corolla

1 Answer

Problems selecting 1st gear peugeot 106 1.1 zest


If the clutch is a problem you will have difficulty selecting 1st only as the gears would be spinning from the engine revs.. I would say that the front input shaft (clutch shaft) bearing is failing allowing miss alignment of the synchros and not allowing proper engagement of the gears synchro rings. It means removal and repair to the gear box so the clutch can be inspected while the box is out.

Apr 08, 2013 | Cars & Trucks

1 Answer

Gear doesn't engage


When the problem acures again.Have someone step on the peddle,then release does the clutch leaver in the bell housing go back allso,if not loosen the line at slave cylinder,does it go back now,if not might be binding at trans input shaft.if it does release tighten line again pump peddle 3 times and go after master cylinder line.with peddle released does fluid squrt out.has the fluid ever been changed.like all fluids they absorb moisture that freezes or creates dirt from rust and binds the system.i would flush with DOT3 or DOT4 BRAKE FLUID.

Nov 21, 2012 | Cars & Trucks

1 Answer

93 toyota tercel clutch. pedal goes to floor very easy. have to pump to get it to engage. very hard shifting sometime cant. whats the problem


the clutch oil is low or empty fill it or there is bad clutch cylender either the one located in front of the steering inside the engine compartment change it or the other is near the gear box

Feb 11, 2011 | 1993 Toyota Tercel

1 Answer

I have a 02 Saturn and my clutch is giving me some problems..when the car is on the clutch pedal won't allow me to engage in any gears, but when turned off it allows me to shift no problem. Checked all the...


You have one of these two things going on....Either the clutch master cylinder is internally bypassing or the clutch itself has gone bad. If you can pump the clutch and sometimes be able to shift, the master is bad. If the clutch pedal feels normal, then I'd suspect the actual clutch disc is worn out.
Your clutch has little to do with shifting with the engine off as nothing is turning and engaging the gears is not a problem. Have an experienced tech take a look at it if in doubt ...should take all of five minutes to determine what's wrong.

Jan 20, 2011 | 2002 Saturn Sl

1 Answer

Transmission wont engaged when mashing the clutch


Sometime this can be a sign of a bad clutch plate. This happens when you are pushing in the clutch, but the wheel that locks the clutch into the next gear just keep spinning.

Nov 28, 2010 | 1997 Hyundai Accent

1 Answer

Sticky clutch


mid level to higher, u have a worn out clutch, replace it before u damage the trans

Apr 14, 2009 | 2004 Ford Focus

1 Answer

Sometimes I have to double clutch to get my 1991 Cherokee Sport 4.0 to shift. It is always a little rough, but sometimes won't go into gear and I have to pump the clutch and it will go in. Also,...


does your truck use a hydraulic clutch assembly? if so, you may have to bleed the master cylinder at the slave cylinder near the bell housing of your tranny.

Aug 14, 2008 | Jeep Cherokee Cars & Trucks

Not finding what you are looking for?
2005 Rover 75 1.8 Logo

49 people viewed this question

Ask a Question

Usually answered in minutes!

Top Rover Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14251 Answers

Rob
Rob

Level 2 Expert

62 Answers

Are you a Rover Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...