Question about 2005 Suzuki XL-7

1 Answer

Rotor removal on xl7

How to remove rotor for replacement

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Suzuki Master
  • 20,706 Answers

Front disc rotors? (not rear brake top hat rotor)
are you asking for all steps in the FSM. for this?
can I assume you've done other cars? or is this a first time ever thing.
?
wheel off, caliper off. hanging there with coat hanger. or tie wrap.
there before you, is a rotor mounted to a hub.
on mine there are 2 , M8 (8mm) holes there, threaded
in the FSM it shows that you put 2 bolts there and spin them down
and use the to force the rotor off the bearing hub.
the drums on Suz. do same deal.
read the day pass.? for 4 bucks.????
https://suzukipitstopplus.com/Products/10046-2005-grand-vitara-grand-vitara-xl-7-service-manual-sq625-gv-ja627-xl7.aspx

or,
here is the drum , getting 8mm action. the rotors work the same way and for the same reason.
http://www.fixkick.com/axles/right_axle_pull_04/axle_pull%20%286%29w.JPG


here is a google search for GV rotors
see the extra holes here.
http://1aauto-images.s3.amazonaws.com/partimage/BFS/1ABFS01535/main.JPG

if you need caliper help (remove) ask or wheel or >???

Buy the FSM .

Posted on Mar 28, 2014

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 382 Answers

SOURCE: trying to replace alternator on SUZUKI XL7

yes use a small socket wrench as in a 1/4 in drive i had the same problem with my echoe not a lot of room to undo bolt with a bigger ratchet...As for the belt if serpitine you need to remember how to put the belt back in there should be a tensioner pulley that you need to move to remove and replace belts however swinging alternator out of way or removing same will allow some belts to be removed if only 1

Posted on Dec 21, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to install left front door handle on 2007 suzuki xl7


remove door skins, card.
remove handle rods.
remove handle screws
remove handle.
or
RTM?

https://suzukipitstopplus.com/Products/10182-2007-xl7-service-manual.aspx


$4 dirt cheap, and does blow by blow, steps.

Mar 18, 2015 | Suzuki XL7 Cars & Trucks

1 Answer

Remove center console 2008 suzuki xl7


between seats.?
there are 3 choices for docs. to read.
a real FSM. by suzuki , book (buy one) used? at fleabay
alldata.com
and
just 4 bucks to read it
https://suzukipitstopplus.com/Products/1158-2008-xl7-service-manual.aspx


Feb 02, 2015 | 2008 Suzuki XL7

1 Answer

How do i replace the starter in a 2005 SUZUKI XL7


same as all cars
1: battery neg lug removed, tied back. (or boom happens)
2: remove all wires to starter, solenoid.and starter.
3: unbolt starter (nuts and bolts on base)
4: starter falls to earth.
reverse above to replace.

Nov 13, 2014 | 2005 Suzuki XL-7

1 Answer

How to install the alternator belt in a 2008 Suzuki xl-7?


which engine option, you do know belts are not same on all engines right? fact.
2.7L V6 or bigger? IDN.

same on all cars. (answering in generic form do to above)
loosen the tension-er.
take off old
put back new
and if not a spring tension-er,set proper tension
the fSM cover all this.
why not read the manual, RTM?

here is one example (get the book, RTM or see alldata.com)

2008 xl7 engine


Removal Procedure

Remove the air cleaner assembly. Refer to Air Cleaner Assembly Replacement .

Install the engine support fixture. Refer to Engine Support Fixture .

Remove the engine mount strut bracket. Refer to Engine Mount Strut Bracket Replacement - Right Side .

Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .

Remove the engine splash shield. Refer to Engine Splash Shield Replacement - Right Side .

Remove the right side engine mount bracket. Refer to Engine Mount Bracket Replacement - Right Side .

Lower the vehicle


Rotate the drive belt tensioner clockwise to release the drive belt tension.

Slide the drive belt off of the belt idler pulley (1).

Slowly release the drive belt tensioner.

Remove the drive belt from the accessory drive pulleys.

end remove
beg, install



Install the drive belt to the crankshaft pulley, the tensioner and the generator.

Rotate the drive belt tensioner clockwise.

Install the drive belt to the idler pulley (1).

NOTE

Important: Ensure the drive belt is properly aligned and seated into the grooves of the accessory drive pulleys.

Slowly release the drive belt tensioner.

Raise the vehicle.

Install the right side engine mount bracket. Refer to Engine Mount Bracket Replacement - Right Side .

Install the engine splash shield. Refer to Engine Splash Shield Replacement - Right Side .

Lower the vehicle.

Install the engine mount strut bracket. Refer to Engine Mount Strut Bracket Replacement - Right Side .

Remove the engine support fixture. Refer to Engine Support Fixture .

Install the the air cleaner assembly. Refer to Air Cleaner Assembly Replacement .
end.

Sep 07, 2014 | 2008 Suzuki XL7

1 Answer

Replace power window switch


rtm?
read the manual?
the 2008 FSM covers all this. and is complex on 07+ Suzuki's

window failure. 1 window of 4
its not the 1 circuit breaker if motor is 100% dead.
its one of 3 things,
1: bad switch
2: bad motor
3: window jammed overloading motor.

(and as always, bad wiring (conns) to same)
a volt meter finds this easy./

the FSM covers door panel removal and that switch.
or youtube, door panels off. 1million hits.


Jul 08, 2014 | 2008 Suzuki XL7

1 Answer

Replace fan belt on Suzuki XL7 2002


how do you get in to replace the belts? Do you have to remove the fan?

Oct 10, 2012 | 2003 Suzuki XL-7

1 Answer

Trying to replace alternator on SUZUKI XL7


yes use a small socket wrench as in a 1/4 in drive i had the same problem with my echoe not a lot of room to undo bolt with a bigger ratchet...As for the belt if serpitine you need to remember how to put the belt back in there should be a tensioner pulley that you need to move to remove and replace belts however swinging alternator out of way or removing same will allow some belts to be removed if only 1

Dec 21, 2009 | 2002 Suzuki XL-7

Not finding what you are looking for?
2005 Suzuki XL-7 Logo

135 people viewed this question

Ask a Question

Usually answered in minutes!

Top Suzuki Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Boyet Soriano
Boyet Soriano

Level 2 Expert

293 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...