Question about 2008 Saturn Aura

Open Question

What is a wrench button & min button

What is a wrench button and min button to reset the tire pressure warning

Posted by on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Ford Freestar Message Center not visible. Need help resetting tire warning light.


You can't reset the tire pressure warning light (TPMS), when the pressure is adjusted or the sensor replaced (if the warning is false) the light will go out, there is no reset. Check the air pressure in all the tires, they should be about 34 PSI all around.

Jun 03, 2016 | 2004 Ford Freestar

1 Answer

Why does tire light stay on 2011 Toyota?


Reset the Tire pressure monitoring system light. The reset button is located under the steering side under the finish panel. You have to bend down to see the button.
Operate the tire pressure warning system reset switch only after the inflation pressures of all 4 tires have been adjusted on the vehicle.
To initialize the system, press and hold the tire pressure warning system reset switch for 3 seconds or longer with the power switch turned IG-ON

Jul 23, 2014 | 2011 Toyota Highlander

1 Answer

Tyre Pressure and ABS


By operating the tire pressure warning system reset switch, tire pressure warning system ECU can be set to issue a warning at an inflation pressure that corresponds with the type of tires.
Operate the tire pressure warning system reset switch only after the inflation pressures of all 4 tires have been adjusted on the vehicle.
To initialize the system, press and hold the tire pressure warning system reset switch for 3 seconds or longer with the power switch turned IG-ON. When starting the initialization, the tire pressure warning light blinks 3 times at 0.5 Hz.
During the initialization, the tire pressure warning system valve & transmitter measures the inflation
pressure of the tires, and registers the signals that are transmitted into the ECU at a frequency of 1 per
minute. The initialization process is completed when the signals from the tires have been received.
Once the tire pressure warning system reset switch has been pressed, do not turn the Ignition switch OFF for a few minutes.

Mar 05, 2014 | 2002 Toyota Corolla

1 Answer

Tire pressure warning light stays after I have checked the pressure in all tires and they are within specs. The manual tells me to push the reset button to turn it off. Where is the reset button locate...


I had the same issue. The spare tire also has a sensor, so make sure you check the tire pressure of that tire as well.
The reset button is below the traction in line with your right knee. I used my cellphone camera and and that is how i found it.

Feb 11, 2011 | 2005 Toyota Highlander

2 Answers

The words tire reset keep on popping up on my dashboard. What does that mean, and how do I get rid of it? 2004 Ford Freestar.


With and without "Mesage Center" respectively (pretty sure)

With the engine on...

Push "Setup" button, until your driver display says something like "Press Reset for system check".

Then push Reset. The system check will start, rotating through a series of checks.

About the fifth or sixth check will be the tire pressure. The system will sound the tone (same one that starts w/the light) and It'll say something like "Check Tires Pressure" on that moment press and hold for 3 or 4 seconds Reset. When you release the Reset button It'll show "Hold Reset if tires are OK". While that's up, hold the Reset button. After 3 or 4 seconds, the tire warning light will blink 2 or 3 times and then will stop .You need to be ready for it, because you don't get very long to release.

How to reset the low tire pressure warning if the vehicle does not have the "Message Center"

Turn the ignition to the ON position,
depress and Trip/odometer button (located in the instrument cluster) until "TIRE RESET" or "CHECK TIRE AND RESET" is displayed in the odometer display window.
Once "TIRE RESET" or "CHECK TIRE AND RESET" is displayed, press and hold the button for three seconds.
The low tire warning indicator light will flash three times as the low tire warning system begins to initialize.

This information is in the Owners Manual

Hope it helps

Nov 04, 2010 | 2004 Ford Freestar

3 Answers

How to reset the computer for oil & tire presurre warnings


There are 4 key ignition settings: Off, Acc, On, Start Turn key to the On position, quickly press the gas pedal 3 times, then turn key clockwise to Start position and actually start the car. You'll hear it chime at you and the change oil indicator light will flash and disappear.

The tire light....Have you checked all your tires for prper air pressure? including the spare? If they all have the maunfactures recomended PSI. Remove the negitive post from the battery for 20 min. to rest puter. If that dont work you have a faulty TPMS on a tire need a new one. Hope this helps

Nov 07, 2009 | 2004 Pontiac Grand Prix

3 Answers

Replaced all tires, tire pressure monitor came on, never disapear


make sure all tire pressures are fine.. my have to go to dealer have them ck semsors

Jul 19, 2009 | 2007 Volkswagen Jetta 2.5 Sedan

1 Answer

How do you reset a low tire pressure warning on a 2008 Jetta?


Reset the tire pressure warning, same as you would any service issue. Insert key in ignition, hold wrench button and min button, then start engine.

Apr 30, 2009 | 2007 Volkswagen Jetta 2.5 Sedan

1 Answer

I need to reset my tire warning light and the service needed light. How do I do this???


Your tires have pressure/temp sensors in them. Even the spare tire. Set them all at 35lbs. Most times people forget about the spare and it keeps the light on. Turn the key on and wait about 2 mins. The light should go out. Some Sequoias have a reset button under the steering wheel on the bottom of the dash. This sets the low pressure threshold and only needs to be reset if memory was scrambled somehow. Rare so don't worry about that now. If the light blinks on startup its possible you have a bad sensor in one of the tires and will need to checked at the dealer.
The MAINT light is reset with the little stem button you use to change the odometer from odo to trip 1 or 2. Set it to odo and turn the truck off. Push and hold the button while turning the key to on. The display will show -------------- Keep holding it until it changes to 0000000. The its reset for another 5k miles.


Apr 13, 2009 | 2006 Toyota Sequoia

1 Answer

2005 ford freestar reset light on


Vehicles Without Message Center To reset the system, press and hold the odometer reset button and wait for the "TIRE PRESSURE SET" light to illuminate. Continue to press the button for 3 seconds, then release. After 3 seconds, the low tire pressure warning lamp will flash 3 times, indicating that the low tire warning system reset procedure is complete.
Vehicles With Message Center To reset the system, press and hold the SETUP button and wait for the message center to display "REST FOR SYSTEM CHECK". Then press the RESET button and wait for the message center to display "HOLD RESET TO RELEARN". Press and hold the RESET button for 3 seconds. The message "HOLD RESET TO RELEARN" and the low tire warning lamp will flash 3 times, indicating the reset procedure is complete.

Mar 12, 2009 | 2005 Ford Freestar

Not finding what you are looking for?
2008 Saturn Aura Logo

Related Topics:

34 people viewed this question

Ask a Question

Usually answered in minutes!

Top Saturn Experts

yadayada
yadayada

Level 3 Expert

75744 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8123 Answers

Are you a Saturn Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...