Question about 2003 Chevrolet Venture Passanger
Hello, I bought new power switches for the windows on both sides and it still dose not go up or down level. I took the door panel off and checked the window slides and they are level. So what ells could be wrong with the windows not going down or up level?
You actually want to replace the window regulator, it's not too hard to do, you have to remove the door panel, loose the tensioner, and then remove the window as well as the regulator then replace the regulator. There are some good instructions on the internet if you search. It takes about an hour or so. I just did this a couple months ago. https://www.youtube.com/watch?v=arRZbGZbffU
Posted on Jul 08, 2014
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Check the fuses first. If that dont work take the door apart the wiers have problably lost the connection due to kids and chocolate.
Gotta love them tho.
Posted on Jan 27, 2009
If neither switch works it is a bad connection at the motor or bad ground or a bad motor. Remove the door panel unplug the motor push the switch and see if there is 12volts on the wires if there is the motor is bad There are small brushes in the motor that go bad tap on the motor while pushing the switch if it works that way replace it
Posted on Mar 29, 2009
SOURCE: door locks and power window
Just did this procedure I got from coloradofans.com forums:
"any type of power/voltage change seems to trigger this issue
The most common symptom is power locks fail and only the driver window quits, however that is on the extended cab.
Steps to fix and it works every time.
take door panel off driver's door
Disconnect the wiring attached to window and power lock control unit
disconnect battery cables
connect the negative to the positive cable(((NO BATTERY CONNECTED)))
This will act to short residual voltage in the system
5 minutes later
place the key in the ignition and turn to the run position
connect the wiring to the window/lock controller
connect the negative cable to the battery
then the positive
open drivers side door
turn key to the off position((do not remove yet)) you should get a series of dings through speakers telling you the key is still in the ignition
once it begins dinging pull the key out and you should hear the door lock solenoids trigger and the windows should work." - Coloradofans.com forums
Posted on Mar 20, 2010
Tips for a great answer:
Mar 27, 2014 | 1999 Chevrolet Venture
Mar 27, 2014 | 2003 Chevrolet Venture Passanger
Oct 10, 2012 | 1994 Buick LeSabre
Apr 04, 2012 | 2000 Ford F250 Super Duty Crew Cabs
Mar 22, 2011 | Chevrolet Astro Cars & Trucks
Jun 27, 2017 | 1998 Volkswagen Jetta
Apr 04, 2009 | 2000 Jeep Grand Cherokee
Jun 17, 2008 | 2003 Chevrolet Venture Passanger
87 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: