Question about 2006 Chevrolet Trailblazer Ext
Driver side lumbar seat will not deflate
Could be a problem witch air solenoid inside the seat or the balloon itself or line not connected
hope it helps
Posted on Mar 27, 2014
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
There are not two rods, there are two clips one under fender weild and one right above the light on top of the cover. Pull up on these two clips and pull the light forward a couple of inches and remove the dust cover. You have to take the air filter cover off to be able to reach in and replace the light. It took me about 10 min to figure these out but hope it helps out.
Posted on Jan 14, 2009
SOURCE: 03 chevy tahoe
There are seperate blowers for the front and rear air. It is most likely either your blower motor or the resistor, both located under the passenger side dash. I got a blower from a salvage yard for $25, But ended up having to get the resister from the dealership for about $130. Hope this helps.
Posted on Jan 20, 2009
I would start by checking all your fuses. Then I would check the A/c control panel on your dash. There is little vaves inside those black boxes under the dash. One side is vent the other side is a/c. it might be stuck. knock on it with something blunt.
Posted on Aug 21, 2009
Tips for a great answer:
Feb 01, 2015 | 2005 Chevrolet TrailBlazer
Jun 28, 2011 | 2006 Lincoln Town Car
Apr 29, 2011 | 1994 Mitsubishi 3000GT
May 21, 2017 | 1998 Jaguar Xj Series
May 09, 2010 | 2004 Saab 9-3
May 02, 2009 | Cadillac DeVille Cars & Trucks
Dec 31, 2008 | 2005 Nissan Murano
Dec 24, 2008 | 2005 Chrysler Pacifica
215 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: