Question about 2009 Toyota Corolla

Open Question

EBCM I have a faulty EBCM in my 09 Corolla. Any place I can find a replacement for a decent price?

Posted by Anonymous on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2007 chevy trailblazer code co131 brakes capliars locking up


DTC C0131 Antilock Brake System (ABS)/Traction Control System (TCS) Pressure Circuit

The master cylinder pressure sensor is located within the brake pressure modulator valve (BPMV). The master cylinder pressure sensor signal, to the electronic brake control module (EBCM), increases as hydraulic pressure in the front brake circuit increases.

Conditions for Setting the DTC co131
Any of the following conditions may cause the DTC to set.
• The EBCM detects open master cylinder pressure sensor circuitry.
• The EBCM detects shorted master cylinder pressure sensor circuitry.
• The master cylinder pressure sensor self-test, which occurs at power-up, fails.
• The zero-pressure signal voltage is not within an acceptable range.
• The master cylinder pressure is not within an expected tolerance based on deceleration rate and other data available to the EBCM.

1
Did you perform the Diagnostic System Check - Vehicle?
YES - Go to Step 2
NO - Go to Diagnostic System Check - Vehicle
2
Inspect the vehicle for the following and ensure that there is no base brake failure:
• Dragging brakes
• Faulty parking brake switch
• Brake fluid leakage
• Air in hydraulic system
• Seized brake calipers
• Swollen, kinked or otherwise damaged brake hoses
Did you find and correct the condition?
YES - Go to Step 9
NO - Go to Step 3
3
Drive the vehicle in order to verify that the brakes do not self-apply during turning maneuvers.
Do the brakes self-apply during turning maneuvers?
YES - Go to Symptoms - Hydraulic Brakes
NO - Go to Step 4
4
Use the scan tool to clear the DTCs.
Turn OFF the ignition for 5 seconds.
Turn ON the ignition.
Operate the vehicle within the Conditions for Running the DTC as specified in the supporting text.
Does the DTC reset?
YES - Go to Step 5
NO - Go to Diagnostic Aids
5
Select the vehicle stability enhancement system (VSES) Data Display function on the scan tool.
Observe the Brake Switch Status parameter while pressing and releasing the brake pedal.
Does the Brake Switch Status change while pressing and releasing the brake?
YES - Go to Step 6
NO - Go to DTC C0161
6
Remove the electronic brake control module (EBCM) from the vehicle. Refer to Control Module References .
Inspect the master cylinder pressure sensor connector within the EBCM for damage or corrosion.
Is there connector damage or corrosion present?
YES - Go to Step 8
NO - Go to Step 7
7
Important: Following EBCM replacement, perform the set-up procedure for the EBCM. Use the scan tool to perform the Tire Size Calibration procedure.
Replace the EBCM. Refer to Control Module References .
YES - Did you complete the replacement?
NO - Go to Step 9
--
8
Important: Following EBCM replacement, perform the set-up procedure for the EBCM. Use the scan tool to perform the Tire Size Calibration procedure.
Replace the EBCM and the brake pressure modulator valve (BPMV). Refer to Control Module References .
YES - Did you complete the replacements?
NO - Go to Step 9
--
9
Use the scan tool Clear All Class 2 DTCs function to clear all of the DTCs from all modules.
Turn OFF the ignition for 5 seconds.
Turn ON the ignition.
Operate the vehicle within the Conditions for Running the DTC as specified in the supporting text.
Does the DTC reset?
YES - Go to Step 2
NO - System OK

Mar 13, 2017 | Cars & Trucks

1 Answer

What are the probable causes of DTCs C0222, C0226, and C0237?


Brent, Check and clean connections(use electronic contact cleaner), make sure wires are not damaged. Check grounds from EBCM controller. Check links below and don't be afraid to google search for more info.
C 0222 Missing Right Front Speed Signal
C 0226 Missing Left Front Speed Signal
- Faulty Right/Left Front Speed Sensor
- Right/ Left Front Speed Sensor harness is open or shorted
- Right/ Left Front Speed Sensor circuit poor electrical connection
- Faulty EBCM

C 0237 Erratic rear speed signal
- Faulty Rear Speed Sensor
- Rear Speed Sensor harness is open or shorted
- Rear Speed Sensor circuit poor electrical connection
- Faulty EBCM


How fixed Chevy with an Abs and Brake light on

https://www.google.ca/url?sa=t&rct=j&q=&esrc=s&source=web&cd=3&cad=rja&uact=8&ved=0ahUKEwi0i8zz5YzLAhWD74MKHffwDLQQtwIIITAC&url=https%3A%2F%2Fwww.youtube.com%2Fwatch%3Fv%3DR_5WZUebDx8&usg=AFQjCNHimqe_Fje8AySjD5N0Wh8z8dQuuw

How To Install Replace Front ABS Sensor and Harness 2000 06 Chevy Suburban...

Feb 23, 2016 | 2003 Chevrolet Tahoe

1 Answer

05 trailblazer 4.2 Multiple codes Po106, po305, po463, po128, po856 Co298,c0237,c0265,c0245,246, c0241,c0242, c0251,52,c0247,co243 WTF could all this mean


Hi Candice, .How does it run ? P0305 is a misfire code for cylinder #5, P0106 The manifold absolute pressure (MAP) sensor responds to pressure changes in the intake manifold. The pressure changes occur based on the engine load. The MAP sensor has the following circuits:
5-volt reference circuit
• Low reference circuit
• MAP sensor signal circuit
DTC P0128 Engine Coolant Temperature (ECT) Below Thermostat Regulating Temperature
C0237
The EBCM detects an erratic rear wheel speed signal for 105 milliseconds.
DTC C0265 EBCM Motor Relay Circuit
C0265
Thoroughly inspect connections and circuitry that may cause an intermittent malfunction.
• DTC C0241 EBCM Control Valve Circuit
• DTC C0242 EBCM Control Valve Circuit
• DTC C0243 EBCM Control Valve Circuit
• DTC C0244 EBCM Control Valve Circuit
• DTC C0245 EBCM Control Valve Circuit
• DTC C0246 EBCM Control Valve Circuit
• DTC C0247 EBCM Control Valve Circuit
• DTC C0248 EBCM Control Valve Circuit
• DTC C0251 EBCM Control Valve Circuit
• DTC C0252 EBCM Control Valve Circuit
• DTC C0253 EBCM Control Valve Circuit
Sure looks like the ( EBCM ) Electronic Brake Control Module needs to be replaced .All these codes mean The EBCM detects an internal malfunction. Is the abs light on ?

Jan 06, 2015 | Cars & Trucks

1 Answer

TOYOTA COROLLA 1.6L OR 1.8L, HOW DO YOU KNOW


To get to know about the displacement look at the engine codes which are printed along the engine number on the cylinder block, mostly seen from standing in front of the car with the hood opened. Some of the codes are described as under:
S.No. Model Displ. Year
1.1ZR-FE AURIS 1.6L 2007-11
2. 1ZR-FE COROLLA 1.6 2007-11
3. 1ZZ-FE Avensis 1.8L 2003-09
Cilica 1.8L 2000-03
Corolla 1.8L 2002-07
RAV-4 1.8L 2005-09
4. 2ZR-FE Yaris 1.8L 2007-11
5 2ZZ-GE Corolla 1.8L 2001-05

Nov 19, 2013 | 2004 Toyota Corolla

1 Answer

How to replace light burned out on gear shift console 2008 corolla


Dores the 09 corolla have a bulb or is it an electrical thing under the gear shift console?

Mar 13, 2012 | 2008 Toyota Corolla

2 Answers

Where is the best and cheapest place to buy an erg valve the auto parts store wants around 140$ Thanks for the tipps


I have the lowest price avail on the internet for this valve, i have checked, that price is at www.rockauto.com it is $122.00

May 26, 2010 | 1994 Buick LeSabre

1 Answer

2001 Corolla Clock does not work. How to remove?


The clock is most likely dead, but can be refurbished at a decent price by www.subaru-clock.com. If you email "Dr.Clock" (as he calls himself) he may be able to assist you with some removal tips. This "dead" clock condition is very common in the Camry, Corolla, Matrix lines.

Mar 31, 2009 | 2001 Toyota Corolla

2 Answers

09 Corolla vague steering


get it back to the dealer for an allignment. A car that new should not do that. something is wrong.

Jan 17, 2009 | 2009 Toyota Corolla

1 Answer

Toyota corolla clock


This is a common problem with many Japanese manufactured digital clocks. The good news is that it can be refurbished at a decent price via Dr. Clock at www.subaru-clock.com. He will even send you simple tips to make the clock removal easy.

Nov 19, 2008 | 2005 Toyota Corolla

Not finding what you are looking for?
2009 Toyota Corolla Logo

Related Topics:

16 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8201 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...