Question about 1996 Dodge Caravan

1 Answer

P1698 no spark,coil pack good

Posted by on

Ad

1 Answer

Type: OBD P1698

Posted on Dec 08, 2014

Ad

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
dmftrucker
  • 1922 Answers

SOURCE: cranks and no spark no power at coil pack

i believe this line is fused from the E.C.M.,go to your local library and find a chilton's auto manual,this will tell you for sure

Posted on Aug 31, 2009

  • 3 Answers

SOURCE: 96 dodge caravan wont fire on cylinder 1 or 4.

check pulse on coil pack conector with noid light ,remember cylinders 1&4 fire at the same time. check pulse while cranking. most likely you have a bad computor or a broken wire

Posted on Feb 25, 2010

Testimonial: "most likely the problem"

  • 120 Answers

SOURCE: was running good would shut

I had one of these before like this. I checked everything for spark and all checked good. a new ecm fixed my problem. it is located near the air filter housing.

Posted on Oct 16, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

On a 2006 Dodge Gran Caravan 3.8, I have no spark on #6 contact on coil pack, when pulling of the boot. Do coil packs go bad? Any other possibilities?


My thinking is, if all the other cylinders have spark, the coil pack is faulty. I'd also change spark plugs and plug wires. Check good primary voltage to coil pack. I didn't think to look for dedicated ground, but, check that also, where applicable.

May 26, 2017 | Dodge Cars & Trucks

1 Answer

Isuzu 2ltr bakkie nmbr 2 and 3 no spark?


post 3, adds, no spark , 2/3 (and still no year, no country stated)
bad coil pack?
wired wrong, this pack.
no photo of the engine, nor real name of it, Petrol.
btw, we dont have "BAKKIE" here. not a single one.
nor KB trucks, either.
what spark system this car has, im clueless.
4 coils or 1 pack.? if one pack , replace all spark wires
if one pack system , if either 2/3 wire opens, both cylinders go dead. try new spark wires. high voltage,

or you measured spark wrong, on 1 pack car.
it takes 2 spark plugs do do that. 2 good plugs and 2 good wires,
#2 and #3, due to the fact they are wired, in SERIES.
see its called wasted spark system, with 1 coil pack and no distributor..
the testing is unique. on this, setup.
try new spark plugs, gapped correctly
and 4 new HV wires,
I bet its go. if not the coil pack is toasted.

Dec 05, 2016 | Isuzu Cars & Trucks

1 Answer

How to check the ignition coil pack in a 2003 toyota corrollla


Usually, if you have good spark at all the spark plugs, then, I don't think the coil pack is your problem? If no spark, check primary voltage and ground for the coil pack. There may be an ohms spec for coil, but, I don't have that right in front of me?
If no spark, are you missing anything else? You have good fuel pressure and fuel injector pulse, engine cranking?

I have to ask, how long since a tune-up? Are there any applicable trouble codes?

Apr 07, 2016 | 2003 Toyota Corolla

1 Answer

Why no spark at coil pack


you will have to check for power and ground and reference at the coil pack. if these are good then the coil pack is no good. check for codes in ECM there could be a crank code set. if one of the voltage checks is bad then you will have to find were the lose of voltage is and repair. note the ground for the coil circuit is controlled by the ECM with what is called coil drivers.

Sep 03, 2014 | 1996 Dodge Neon

2 Answers

Jeep 3.7 cylenders 2 & 4 not firing


3.7 V6, mileage?

most likely the HV wires bad.

then bad coil pack.

did you check spark directly at the coil pack?

i use 2 known good HV wires to do that and 2 good test spark plugs.

both plugs grounded to engine (shell)

that is how you test any wasted spark coil pack. 3 coil pack.

if that fails the FSM shows, unplugging it and check the coil resistances. if wrong the pack is bad,

keep in mind the res. can read ok and coil be bad ,due to internal insulation break down (internal shorts)

if thats ok. the resistance , make sure the wires are not (primary)

to the coil (the low voltage connnector)

if that is ok, its mostly likely a bad coil, (pray not bad PCM)

if tool-less? start with cheap parts , work to expensive. (guessing)





now wasted spark 101.

if one line opens , both spark plugs die. no spark

the wasted spark is wired in SERIES. ( like Christmas lights)

the magic cuts cost of 6 coil\'s.

so if the HV wires are say, cheap , carbon wire and open

you lose, both spark plugs. use MAG wire and end this issues.

get some nice NGK mag wire or Bosch Mag wires.

you can see i hate carbon wire. for good causes.

(carbon string wire)

mag wires is real wire that is coil spun and is inductive. it

has the correct impedance but is not a resistor its and inductor.

and lasts the longest , and worth every penny.

Mar 29, 2014 | 2006 Jeep Liberty

1 Answer

1993 Nissan 300zx: Number 4 cylinder doesnt fire.


Please read about misfire diagnosis and repair here.

Oct 01, 2012 | 1993 Nissan 300ZX

2 Answers

I dont have any spark. have power to the coil pack just nothing past that. what to do??


Check the crank shaft postioning sensor. If you are getting power to the coil pack and there is no power coming out of the coil pack the coil pack might be bad or have corrioson between the coil pack and the mount. Thanks

Mar 07, 2011 | 1999 Mitsubishi Eclipse

1 Answer

No spark


Hi and welcome to FixYa!

If there's no spark then the problem will be on the coil pack. If the coil pack is faulty there will be no current to the plugs. The coil pack will surely need replacement. The coil pack is located on the side of the engine, you will need to take the cap off where the plug wires are connected. Once the cap is removed, remove the coil pack inside the engine and replace it with a new one.

After the replacement you'll be good. Hope this helps and thank you for using FixYa! Have a good one!

Mar 02, 2011 | 2000 Dodge Stratus

1 Answer

2005 Cavalier misfiring on 2 cylinders, dumping fuel


Spark plugs get there voltage from the ignition coil packs, more then likely you have a bad coil pack or coil pack boot, pull one coil pack or spark plug wire or boot at a time, if you see a drop in rpm, that one is good, if no drop bad coil pack.

Jul 19, 2010 | Chevrolet Cavalier Cars & Trucks

1 Answer

Not getting spark


Testing the coil packs.

1. Get an INSULATED wire and hook it to a ground on the car.
2. Get some one to help you
3. pull a spark plug wire off the coil
4. hold grounded wire close to, but not touching, the part where the spark plug wire connects
5. keep hands away from coil and have your helper turn the engine over ( start car and turn off)
6. if there was a spark between the wire and the coil pack it is good. if not, the coil pack needs replaced
7. replace the spark plug wire
8. test the rest

Apr 22, 2009 | 2003 Mitsubishi Galant

Not finding what you are looking for?
1996 Dodge Caravan Logo

Related Topics:

56 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...