Question about Hyundai Veracruz
WANT COUPONS FOR CHANGE OIL, FILTER AND CABIN FILTER
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
the filter is behind the glove box. pull the 2 clips on both sides of glove box. then remove glove box. the filter cover should be right there and just unclip the cover and replace filter.
Posted on Jan 19, 2009
Replace the oil filter after draining the old oil, and" BEFORE "adding new fresh oil, otherwise you'll be dump all that fresh oil, on the ground,while you "TRY to get the new filter installed.
Step 1 Remove drain plug,Drain oil into drain pan
Step 2 Remove oil filter
Step 3 Reinstall drain plug,qnce oil has drained.
Step 4 Fill new filter with oil,lube seal on filter.
Step 5 Install new filter, Add fresh oil to proper level.replace filler cap
Step 6 Run engine check for leaks.
Posted on Jul 10, 2009
SOURCE: need to install cabin air filter
If it's anything like my 2005 Tucson all you have to do is open glove box and find the elastic cord that comes from behind glovebox and runs through a hole in the side. Release this cord (just let it go, it won't go anywhere). Drop the glovebox down and you'll see where to replace the filter. There are 2 black clips a little ways in on either side, you have to pinch these and pull on them at the same time. The filter will pull out, replace it, slide back in, then rehook the elastic cord and close glovebox. Done!!!
Posted on Aug 17, 2009
I just did this on our 2007 Sonata. 1. open the glove box. On both sides of the glove box, there is a black tab which prevents the glove box from opening to far. The Chilton manual says to remove these, but that is more difficult then simply pressing inward on the sides of the glove box to release them from the channel. Now the glove box should open even more. Next, remove the piston arm from the right side of the glove box. You can do this by removing the panel on the side of the dash, but you first need to open the passenger door. You can also just use a screwdriver or other tool to slip the piston of without removing the dash side panel. Now with the glove box hanging fully open, you can see the cabin filter box. There are tabs on both sides of the front that you simply press together in order to slide the filter out of the box. This whole process from beginning to end should only take about 10 minutes and is very simple.
Posted on Dec 27, 2009
Tips for a great answer:
May 02, 2014 | 2010 Hyundai Santa Fe
Jan 10, 2014 | 2012 Nissan Altima 2.5 Sedan 2.5L 4-cyl....
Dec 29, 2012 | 2012 Buick Verano
May 03, 2011 | Suzuki Grand Vitara Cars & Trucks
Aug 10, 2010 | Hyundai Motor 2004 Accent
Jul 29, 2010 | 2001 Hyundai Santa Fe
Jul 05, 2010 | 2000 Hyundai Accent
Sep 20, 2009 | 2007 Hyundai Tiburon
15 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: