Question about 2003 Mercury Grand Marquis

Open Question

P0068 map/maf-tps correlation how to ck connections

What is map/map-tps correlation and how to ck connections

Posted by Anonymous on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

P0068 P0306 P0449 Why are all on at same time 2007 GMC Yukon


code p 0306 is --misfire on no 6 cylinder ===causes injector wiring ---ht leads , coil
code p 0449 is EVAP purge valve --circuit malfunction ===causes --wiring--EVAP canister purge valve --ECM and code p 0068 is MAP ( manifold pressure )sensor ( mass air flow sensor (MAF)---throttle position correlation===causes --wiring--MAP/MAF sensor--mechanical fault
could be a common wiring harness plug connection or loose connections on the ECM

Aug 10, 2017 | GMC Cars & Trucks

1 Answer

P0068 and p0102 and p0113 suburban 2007


P0068 MAP/MAF manifold absolute pressure/mass airflow throttle position correlation

Mar 28, 2015 | 2007 Chevrolet Suburban

1 Answer

04 ram has 2 codes p0068 p0175


Here's a link to the P0068 code. P0068 MAP MAF Throttle Position Correlation Here's the link to the P0175 CODE. P0175 OBD II Trouble Code

Mar 10, 2015 | Cars & Trucks

1 Answer

P0123 and p0068 on a dodge durango 2007


P0068 - MAP/MAF Throttle position correlation
P0123 - Throttle positon sensor/Swtch A Circuit high input

Nov 07, 2013 | Cars & Trucks

1 Answer

Get codes p0068 and p0108


codes p0068 refer to Manifold pressure sensor/mass air flow sensor--throttle position correlation--causes ---wiring---map sensor---maf sensor--mechanical fault.
code p0108 refers to manifold absolute pressure(map) sensor/barometric pressure (BARO) sensor--high input. causes ---wiring short to positive---map sensor---baro sensor---ecm.

Mar 28, 2013 | 2002 Dodge Intrepid

1 Answer

2003 intrepid code p0068


Good Morning,

Sorry for your problem, But i am here to help

Here is what the sensor normally means, It's a map/tps sensor correlation code, essentially it means the map sensor reading isn't what's expected with the tps reading and vice versa! It sounds like your tps sensor is probably bad or the circuit to one of those 2 sensors.

I hope this helps. Thanks Mike
mc1bean_117.jpg

Aug 03, 2011 | Dodge Intrepid Cars & Trucks

1 Answer

What do computer codes P0068 & P0496 mean ?


P0068 MAP/MAF is Throttle Position Correlation.In this error code:--- From the error code P0068 you have its indicating a bad throttle body or throttle actuator controller.. The 2 tps sensors inside read each other and if they differ for a few seconds or milliseconds then you get a this error code with reduced power. In some cases the new connector and wiring to the throttle actuator is required and in some cases getting the throttle body cleaned helps.---------------
And code P0496 - "Evaporative Emission System High Purge Flow".------------In this error the purge valve needs to be replaced. The purge valve is mounted on the inlet manifold under the hood.Its on the top of the intake manifold, passenger side. Two hoses (one on each side) and a wire harness on the front of it. It has a red w/blue stripe and brown w/white stripe wire harness connected to it.Remove and replace this valve.-----------------This will help.Thanks.Helpmech.

Jan 20, 2011 | 2008 Saturn Astra

2 Answers

I have a POO68 code, what does this mean? My Durango surges when idle and now when I'm driving i have quick loses of power like not getting enough fuel for a split second.


P0068 MAP/MAF Throttle Position Correlation

That means that the Manifold Absolute Pressure data doesn't jibe with the Mass Air Flow Sensor data and the Throttle Position Sensor Data.

So, any one of these three items may be the cause of your problem.

LIkely, that the TPS is not giving accurate data, but must read codes from the computer to determine any further conclusions.

Aug 21, 2010 | 2006 Dodge Durango

1 Answer

2004 Ram 1500 1/2 ton 2WD. Code P0068 is what is coming up. Truck will idle high/low at times and will die sometimes when I stop. Engine light is on, I have checked for vac leaks and cleaned the sensor...


It's a map/tps sensor correlation code, essentially it means the map sensor reading isn't what's expected with the tps reading and vice versa! It sounds like your tps sensor is probably bad or the circuit to one of those 2 sensors.

Hope helps (remember rated this).

Aug 17, 2010 | 2004 Dodge Ram 1500

1 Answer

Not running properly


Hi
code P0068 = MAF/MAP sensorthrottle position correlation
code P0108 = MAP/BARO circuit high input
code P0441 = EVAP emission control system purge flow fault
take it infor a service
cheers Rob.

Jul 20, 2009 | 2003 Dodge Intrepid

Not finding what you are looking for?
2003 Mercury Grand Marquis Logo

Related Topics:

15 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercury Experts

yadayada
yadayada

Level 3 Expert

74945 Answers

fordexpert

Level 3 Expert

5467 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Are you a Mercury Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...