Question about 2008 Honda Accord

1 Answer

Adjusting wiper blades

I changed the motor and the wipes stop in the up position

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Habit-Forming:

    Visited the website for 3 consecutive days.

  • Honda Expert
  • 179 Answers

You need to remove the wiper arms and run the motor on intermittent position .insure the motor turn the right direction.turn the switch off and wait to stop in park position,remove the ignition key.replace the arms and tight,the bolt.run test

Posted on Mar 27, 2014

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 496 Answers

SOURCE: 2000 Honda Odyssey rear wiper motor replacement

You are probably correct in thinking its the wiper motor. You can do this but you will need to remove all the interior trim from the rear hatch first. Get a trim clip removal tool at a parts store...it will work much better than just a flat blade screwdriver. You'll have to remove the trim panels starting in order from the top of the door, then the left rear window side trim, then right rear window side trim, then the grab handle, and finally the main rear hatch trim panel. Once inside, removing and replacing the rear wiper motor is easy. You'll start by lifting the cover on the wiper arm retention nut. Remove this nut to get the wiper arm off, then remove the nut under neath which is the motor shaft mounting nut. Now, back inside to remove the other 3 motor mounting bolts. Don't forget to disconnect the connector for the motor wires. Reverse steps to replace.

Posted on Apr 06, 2009

Mechanic65
  • 142 Answers

SOURCE: 2005 honda odyssey wiper blades stopped working

1. Open Hood.
2. Remove wiper arms by removing cap nuts. they are a tight fit . there is a puller for this.
3 Remove cowel cover . once cover is off you will see the wiper motor and transmission assy. Possibly a snap joint wore out oa nut holding motor drive arm in place loosened up.

Posted on Oct 25, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Erratic windscreen wiper action


sounds like the wiper control itself is playing up

Feb 27, 2014 | 2001 Nissan Micra

1 Answer

Wipers stop half way up


same like you need to change the wiper plade and the new one wipe the blade with some oil

Jun 26, 2013 | Hyundai Cars & Trucks

1 Answer

Wipes over stroke glass 1996 chevy1500


On most cars, the windshield wiper arm is attached to the car by way of a gear. By grabbing the wiper arm at the base you can pull the entire arm off. Reposition the arm so that it is in the proper position in the wiper off position and tap back into the fixed position

Jan 01, 2013 | 1996 Chevrolet C1500

1 Answer

Front Wipers - not working


If you can move the wiper blades by hand, you probably broke-stripped the gear in the wiper motor.

Dec 18, 2012 | 2002 Chevrolet Venture Passanger

1 Answer

2000 HYUNDAI ACCENT, problem is the Windshield Wiper operation is malfunctioning, in the Delay mode, and in the off position, Windshield Wiper arms/blades stop at the half point on the Windshield glas


The park position is controlled inside the motor/actuator assembly. Not sure if it can be repaired. See if it is assembled with screws versus rivets. A new assembly is less than $100.

Jul 05, 2017 | 2000 Hyundai Accent

1 Answer

How to change front wiper motor on 1993 ford explorer


Hi there,
  • Turn the ignition on, and turn the front windshield wipers on. When the wipers are facing straight up on the window, turn the ignition off so they remain in that position.
  • Disconnect the negative battery cable with an adjustable wrench. Remove the passenger side wiper blade assembly, by removing the pivot nut at the bottom with an adjustable wrench. Remove the wiper linkage access cover, and use a screwdriver to remove the wiper motor clip. Remove the wiper linkage from the wiper motor.
  • Disconnect the electrical connector on the wiper motor. Remove the bolts and nuts, securing the wiper motor with a socket wrench. Remove the wiper motor from the vehicle. Install the new wiper motor, and tighten mounting bolts and nuts with a socket wrench. Connect the electrical harness to the new wiper motor. Connect the wiper linkage, and insert the linkage clip. Install the wiper blade assembly, and tighten the nut with an adjustable wrench.
  • Connect the negative battery cable securely, using an adjustable wrench.
Hope this helps...

Jan 24, 2011 | 1993 Ford Explorer Limited

1 Answer

2002 saturn lw200--wiper blades dont park at bottom of windshied


You need to replace the crank arm on the motor and either replace the bracket under it or bend the tab back up on the bracket so the crank arm can contact it so the wipers stop in the right place.

Sep 02, 2009 | 2001 Saturn L-Series

1 Answer

Wiper does not stop wiping until engine shut-off


you need to replace multi function switch

May 08, 2009 | 2001 Oldsmobile Intrigue

1 Answer

I changed the wiper motor out.  They worked without the blades on, but after installing the blades they tried to move down toward the hood.  I think the motor still works but it seems the shafts are just...


you may of fitted the blades when the wiper motor wasnt in park

ok remove wiper arms turn ignition on turn on wipers then turn of by wiper swicth not key motor will stop in park position fit wiper arms in positon try and your done

Jan 08, 2009 | 1997 Acura TL Series

Not finding what you are looking for?
2008 Honda Accord Logo

61 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...