Question about 1998 GMC Sonoma

1 Answer

My 1995 gmc sonoma vibrates alot when in reverse also recently has been a vibration going in forward as well but not so bad vibration seems too be near the pedals and in seat

Vibration in reverse and now in forward too humming noise and vibrations in seat and floorboard near pedals

Posted by on

1 Answer

Put it in neutral when going 40 to 55 mph

If the noise goes away, you have a 75% chance your
going to rebuild the trans

Posted on Mar 27, 2014

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Bad vibration in reverse


This could be anywhere in the drive-line. Process of elimination would be the best approach. From your symptoms it sounds like the bad vibration is noticed at low speeds. There are many moving parts within this system. Were there and recent repairs performed? New tires could cause a vibration, if the tread is aggressive. Damaged wheel-bearings, defective components inside the rear differential (suspect low fluid level, damaged ring and pinion or bearings), defective U-joints, or internal transmission failure. You didn't mention if the truck was 2wd or 4wd. If the vehicle is a 4X4 then you will need to inspect the transfer case, the U-joints in the output shaft, and the front wheel bearings. I'm not sure how far you want to go with the diagnostics. Please write back if you have other questions or to give an update to how the repair is going, good luck.

Mar 27, 2014 | 1995 GMC Sonoma

1 Answer

Vibration when idling in drive


check your pulley's. Sounds like one of them are bad and causing movement which where the vibrations coming from. A friend of mine had the same problem, his was the fan pulley. It could be moved inward and outward a little but enough to cause the engine to vibrate. The bearings were going out. check it out and let us know what you come up with.

Jan 27, 2010 | 2003 GMC Envoy Xl

1 Answer

Front vibration in 1998 GMC Sonoma extended cab


since you are getting your car aligned make shure that they check the constant velocity joints.....

when these are bad...what you get is a vibration in one o both sides, also you might hear a tapping sound when steering.

May 14, 2009 | 1998 GMC Sonoma

1 Answer

Cab shaking and lots of vibrations out of the rear end


i had the same problem it was the u joints

Feb 25, 2009 | 1996 GMC Jimmy

3 Answers

No reverse after rebuild on 4L60E Transmission from 1995 GMC Sono


There isn't a modulator on this trans as it is electronic

You can have first gear going forwrd but no reverse. It is possible. The low/ reverse clutch isn't needed to go forward.

Jan 19, 2009 | 1995 GMC Sonoma

1 Answer

Rebuilt the Trans.(4L60E) in my 1995 GMC Sonoma PU and after installing it I have no reverse? What went wrong? all forward gears work fine. Also seems like there is a slight whining noise in forward...


did you do the rebuild or did a shop do it? it sounds like the clutches werernt done properly. if the reverse is out the other gears will go out too if driven too far in that condition,

Jan 19, 2009 | GMC Sonoma Cars & Trucks

Not finding what you are looking for?
1998 GMC Sonoma Logo

161 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

75051 Answers

Freddy

Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...