Question about 1966 Ford Mustang
I swapped my 6 cylinder mercurey for 6 cylinder out of 65 mustang now transmission is'nt shiftting
Did you hook up the vacuum modulator on the transmission to the correct vacuum port on that Mustang engine?
Posted on May 21, 2014
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: 1983 Mustang C-4 transmission
that trnas will not bolt up and since you don't have a computor control the trans wount interface with the harness it requires which you do not have on your vehicle. please rate this solution
Posted on Aug 30, 2008
Unfortunately, You will need to Change it all. None of the V8 Components will Transfer to the Inline 6. Please Rate My Response! Thanks!
Posted on Feb 02, 2009
You can swap just the transmission unless the shifter is on the column,then you will need the column as well,You don't need the engine if your is still good.
Posted on May 06, 2009
SOURCE: Manual Transmission
Your transmission fluid needs changing. There are two bolts on the transmission one directly underneath the trans for draining and aother one on the side for refilling the fluid, the one on the side is also used to top up the fluid.
If you haven't changed the fluid in a while then it's best to get it changed.
Hope this helps. Please don't forget to rate me.
Posted on May 20, 2009
Tips for a great answer:
Jul 09, 2017 | Ford Mustang Cars & Trucks
Jan 17, 2016 | Cars & Trucks
Feb 10, 2015 | Cars & Trucks
Jun 24, 2017 | GMC Sierra 1500 Cars & Trucks
Mar 27, 2014 | 1999 Ford Falcon
Feb 13, 2014 | Toyota Pickup Cars & Trucks
Jan 28, 2010 | 1998 Ford Mustang
Oct 27, 2009 | 1994 Ford Mustang
Jul 18, 2009 | 1983 Ford Fairmont
May 06, 2009 | 1987 Ford Econoline
129 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: