Question about 2007 Hyundai Santa Fe Limited

Open Question

Cruise control santa fe

Cruise control button on the steering wheel only works every so often

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 566 Answers

SOURCE: The key wont turn in the ignition of my hyundai

hi from uk please try this ? with key removed try gently turning steerwheel to the right if you feel a slight spring in steering ? hold on the spring and insert key it should work and release lockand turn ign on ? if steering is springing on left ? try as above the same method not unusual for steer lock to prevent turning key as the steering even in straight position ? the necessity to gently release load on lock is req'd to allow key to turn/unlock the steering lock from the steering column practice doing the above each time you fit key to unlock steering and tuning ign on to start hope this helps

Posted on Oct 16, 2009

Ad
  • 67 Answers

SOURCE: cruise control not engaging

replace cruise set switch on steering wheel removes with 2 philips screws.

Posted on Feb 09, 2009

USfalcon
  • 175 Answers

SOURCE: Chirping in steering wheel of 2007 Hyundai Santa Fe

bad p/s belt or need tide

Posted on Mar 17, 2009

ghost4548
  • 776 Answers

SOURCE: Cruise light turns on but set light does not

Sure enough babe! Often the problem is in the CONTROL BUTTONS (those on the steering wheel)... Yet again, I've see the problem point to the Cruise Control Module (Under the hood). Since you mentioned the 'CRUISE' light comes ON, but nothing else is working, I'd hazard a guess the control buttons are malfunctioning. If you press them REAL HARD, do they work? Otherwise, Take the vehicle into a Hyundai Service Center (dealership), pay the diagnostic fee. They will tell you EXACTLY what the problem is and what's needed to fix it (parts, labor, tax, time-frame, etc.).

Posted on Jun 14, 2009

SOURCE: my 2001 hyundai santa fe blower control switch is

REMOVE THE SWITCH AND SPRAY IT WITH ELECTRICAL CONTACT SPRAY. IT MIGHT BE A DRY JOINT

Posted on Jul 15, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2009 hyundai santa fe horn does not work - not from steering wheel nor locking the car. replaced relay. still no good.


More then likely the problem lies in the coiled contact ribbon under the steering wheel that connects the horn button to the horn relay (as well as all other steering wheel mounted controls), it is commonly called a "clockspring" contact drum.

Jul 09, 2017 | Hyundai Cars & Trucks

1 Answer

The cruise control and the hooter does not work on my steering please help


Does the air bag light come on as well ? The clock spring in the upper steering column is use so your steering wheel button's have power an you can still turn the wheel from right to left . They break no an then ! How to replace clock spring in 2006 Hyundai Sonata

May 24, 2015 | 2003 Hyundai Santa Fe

1 Answer

Cruise control keeps popping off.I have replaced right hand switches on steering wheel


check and replace brake light switch on the padel.....it will break the cruise curcit

Dec 29, 2010 | 2001 Hyundai Santa Fe

1 Answer

Cruise control will not engage. Just stopped


check your fueses first, is the check engine light on, if it is it might give u a code?

Jun 07, 2010 | 2004 Hyundai Santa Fe

1 Answer

Cruise control not working sets but no cruise//


Go to Auto Zone for a FREE scan of your vehicles computer. It sounds like the vehicle speed sensor control (VSS) for your trans is bad. They will find out exacxtly what the problem is if so. The VSS is linked to your computer for the cruise as well

Feb 05, 2010 | 2003 Hyundai Santa Fe

2 Answers

Cruise control wont engage it was intermittant for a while, now when i press the button - nothing


dear friend-it can be that the contacts is coroded.next step is to get to them.you need to remove the airbag. but first disconnect the battery.now remove the airbag(bolts is on the side.strip to get to the contacts.spray with contact cleaner and re-assemble

Jul 03, 2009 | 2003 Hyundai Santa Fe

1 Answer

Cruise light turns on but set light does not


Sure enough babe! Often the problem is in the CONTROL BUTTONS (those on the steering wheel)... Yet again, I've see the problem point to the Cruise Control Module (Under the hood). Since you mentioned the 'CRUISE' light comes ON, but nothing else is working, I'd hazard a guess the control buttons are malfunctioning. If you press them REAL HARD, do they work? Otherwise, Take the vehicle into a Hyundai Service Center (dealership), pay the diagnostic fee. They will tell you EXACTLY what the problem is and what's needed to fix it (parts, labor, tax, time-frame, etc.).

Jun 13, 2009 | 2006 Hyundai Santa Fe

1 Answer

Cruise Control does not work


Sounds like the control switch on the steering wheel has gone bad. Check the connector to the Cruise Control actuator located under the hood & inspect the pins/connections. Any corrosion or signs of over-heating? If not, most probable cause is the control switch on the steering wheel. If not, then take veh to Hyundai Service Center and pay diagnostic fee... they will give you a estimate of repairs (parts, labor, tax, time-frame, etc), and that way you'll know exactly what's wrong and what's required to fix it.

May 16, 2009 | 2004 Hyundai Santa Fe

3 Answers

Cruise control not engaging


replace cruise set switch on steering wheel removes with 2 philips screws.

Feb 01, 2009 | 2003 Hyundai Santa Fe

3 Answers

Cruise control stopped working in my 2004 Hyundai Sonata


This works...the cruise is directly tied to the brake lights...when I replaced the brake and side light bulbs on my 2004 Santa Fe,,,the cruise started working with no other adjustments. It must complete a circuit or something.

Sep 11, 2008 | Hyundai Motor 2004 Sonata

Not finding what you are looking for?
2007 Hyundai Santa Fe Limited Logo

Related Topics:

129 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8522 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...