Question about 2004 Toyota Camry

1 Answer

How to adj front lights

How to adj. the front head lights just put new ones in so wanted to know

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,114 Answers

The front head light adjustment on a vehicle can be rather complicated insofar as the vehicle needs to be a certain distance from a wall or screen, and the right and left beams need to be adjusted to specifications. I would recommend taking the vehicle in to a garage for such an adjustment short of having the correct specs for these adjustments. A repair manual for this vehicle may have the head light adjustment specs.

Posted on Mar 26, 2014

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

KIA 2006 SPECTRA LEFT TURN SIGNAL BLINKS REAL FAST AND THE FRONT LIGHT IS DIM,RIGHT SIDE TURN IS NORMAL


One of the bulbs either front or back are blown. More than likely its the front.

Nov 16, 2016 | Kia Cars & Trucks

1 Answer

Why is oil not getting to the top of the engine?


make and model year and engine size would be a help in determining the problem

Jan 26, 2016 | Cars & Trucks

1 Answer

How to adjust headlights


there is two adj. up and down ,left and right.problem to adj. is wont move,corroded.set screw is head lights.

Feb 20, 2013 | 2001 Ford Crown Victoria

1 Answer

Water geting in with the head lights


You need a new set as the ones on now are old and the seals would be hard.If you front lens have metal clips on the then the front glass can be removed and just seal with siliconand put it back on.Mark lens before removalso you know how they were before it came off

Jul 22, 2011 | 1992 Plymouth Acclaim

1 Answer

I want to adj. the aim of my head lights; Location of adj.screws . Thank you


Hi,
Can you give me the year and model etc of your vehicle.
Thanks

Feb 28, 2011 | GMC Sierra 1500 Cars & Trucks

1 Answer

Camry head light adj


Adjustment are located on the sides of the headlight assembly. One adjusts up and down (side) and one adjusts side to side (back) park about 20 feet away from a wall and adjust to center Your beams should be about 6"-8" lower than the headlights and about 6" inside the diameter of the lights

Mar 22, 2010 | 1995 Toyota Camry

1 Answer

I am putting a new timing belt on a 1990 colt vista with a 2.0 liter engine.I need to know the timing mark positions.


On cam gear there's a punch mark, line that mark at 9 oclock there's a timing mark on cylinder head, crank gear, in back of crank gear is a plate with a (v) cut line gear at 11 oclock there's a timing mark on front case, gear to right of crank gear has a (v) cut on it, line it at about 11 oclock at timing mark on front case, adj tensioner and your done.Good Luck.

Dec 12, 2009 | 1990 Dodge Colt Vista

1 Answer

How do you adjust side to side for front headlights on 98 Ford Taurus


On the top of your headlight you should see a screw (usally a star type) that adjust the up and down adj. On the side between the light and grill bezel you should see the same type of screw. That one will adj. the side to side movement. It will be easier if you find a flat wall to use when adj. your lights. Park about 15 feet away and adj. , then drive around and adj. more if needed.

Nov 13, 2009 | Ford Taurus Cars & Trucks

1 Answer

The belt is still on but it is shredded. i need to replace it, i got a new one i have the diagram i just want to know if i am gonna run into any problems if i start to fix it myself? i am pretty good with...


Loosen two pivot bolts on back of Power steering pump. Loosen pivot bolt on front top of P/S pump. Loosen adj lock bolt on bottom front of P/S pump, now loosen adj bolt on bottom right side of P/S pump. When belt is loose enough, remove it. You may have to loosen it more to get the new belt on.

Apr 11, 2009 | 1998 Jeep Cherokee

1 Answer

Jeep grand cherokee revs for to high before changing gear


Message:
My 2002 Dakota has been somewhat confused about shifting as well. It showed a code P1762. I dropped the pan to install a new fluid filter and fluid-(use only ATF+3 or ATF+4). Since the pan was off I decided to adjust the bands. The front band controls the 2nd gear cluster. The rear band controls the 3rd gear cluster and reverse. For a 2-3 shift, the transmission shifts back to 1st gear with the front band while the rear band engages 3rd gear. If the front band does not release the 2nd gear clutches before the third gear clutches engage, the transmission binds, which shortens the life of the transmission clutches. If the front band releases too early in the shift, the engine will overspeed (sounds and feels like a slip) during the 2-3 shift.
The front band adjusting screw is on the driver's side above the shift linkage. The rear band is inside the fluid pan near the filter.
1. Loosen band adjusting screw locknut. Then back locknut off 3-5 turns. Be sure adjusting screw turns freely in case. Apply lubricant to screw
threads if necessary. The front band adjuster is on the outside of the transmission and the locknut requires a 3/4" wrench.

2. Using Inch Pound Torque Wrench C-3380-A, a 3-in. extension and appropriate Torx� socket (T-40), tighten adjusting screw to 72 in-lb. CAUTION: If Adapter C-3705 (from SPX Miller) is needed to reach the adjusting screw, tighten the screw to only 47-50 in. lbs. torque.

3. Back off adjusting screw the number of turns listed below for your transmission.

4. Hold adjusting screw in place and tighten lock-nut to:

41 N�m (30 ft. lbs.) for the front band
34 N�m (25 ft. lbs.) for the rear band
The adjustment screw inside the case is a square head bolt. You will need a 1/4 square head socket to fit your torque wrench.
Band adjustments for each model year:
1994

* Front Band - tighten to 72 in-lb, back off 2-1/2 turns (all transmissions)
* Rear Band
o 32/42RH - Tighten to 72 in-LB, back off 4 turns
o 36/37/46/47RH - Tighten to 72 in-lb, back off 2 turns

1995-1996

* Front Band
o 42RH - tighten to 72 in-lb, back off 2-1/4 turns
o 46RH - tighten to 72 in-lb, back off 2-7/8 turns
o 47RH - tighten to 72 in-lb, back off 1-7/8 turns
* Rear Band
o 42RE/RH - tighten to 72 in-lb, back off 4 turns
o 46RE/RH - tighten to 72 in-lb, back off 2 turns
o 47RE/RH - tighten to 72 in-lb, back off 3 turns

1997-1998

* Front Band
o 42RE - tighten to 72 in-lb, back off 3-5/8 turns
o 46RE - tighten to 72 in-lb, back off 2-7/8 turns
o 47RE - tighten to 72 in-lb, back off 1-7/8 turns
* Rear Band
o 42RE - tighten to 72 in-lb, back off 4 turns
o 46RE - tighten to 72 in-lb, back off 2 turns
o 47RE - tighten to 72 in-lb, back off 3 turns

1999

* Front Band
o 42RE - tighten to 72 in-lb, back off 3 turns. (TSB 21-16-98)
o 47RE - tighten band adj. screw to 72 inch pounds, back off 1 7/8 turns
* Rear Band
o 47RE - tighten band adj. screw to 72 inch pounds, back off 3 turns
+ The 47RH rear band requires a 1/4" hex driver, the front band requires a
T-30 Torx driver, the filter is held in place by two screws which require a T-20 Torx drive

2000-2002

* Front Band
o 42RE - Tighten band adj. screw to 72 in-lb, back off 3 turns
o 44RE - Tighten band adj. screw to 72 in-lb, back off 1 7/8 turns
o 46RE - Tighten band adj. screw to 72 in-lb, back off 2 7/8 turns
o 47RE - Tighten band adj. screw to 72 in-lb, back off 1 7/8 turns
From Bill Konolday's 47RE notes: I usually go a little looser than factory
specs on this front band - backing off the adjustment screw 2 or 2 1/4 turns.
Depending on the circumstances I have backed off the band up to 2 1/2 turns.
* Rear Band
o 42RE - tighten band adj. screw to 72 inch pounds, back off 4 turns
o 44RE - tighten band adj. screw to 72 inch pounds, back off 4 turns
o 46RE - tighten band adj. screw to 72 inch pounds, back off 2 turns
o 47RE - tighten band adj. screw to 72 inch pounds, back off 3 turns

2003

* Front Band
o 48RE - tighten band adj. screw to 72 inch pounds, back off 1-3/4 turns
* Rear Band
o 48RE - tighten band adj. screw to 72 inch pounds, back off 3 turns

2005

* Front Band
o 48RE - tighten band adj. screw to 72 inch pounds,
back off front band adjusting screw 1-3/4 turns for diesel vehicles,
or 1-1/2 turns, for V-10 vehicles.
* Rear Band
o 48RE - tighten band adj. screw to 72 inch pounds, back off 3 turns

94+ Automatic Transmission Bolt and Nut Torque Specs

* Front band adjustment locknut - 30 ft-lb
* Rear band adjustment locknut - 25 ft-lb
* Transmission pan bolts - 13 ft-lb
I just replaced the solenoid with the recommended transducer and all is fine now. The transducer cost me about $50 at a nearby dealership.
Hope this helps. -zman. rroszman@yahoo.com

Dec 09, 2008 | 2001 Jeep Grand Cherokee

Not finding what you are looking for?
2004 Toyota Camry Logo

Related Topics:

130 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

75051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7726 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...