Question about 2007 Saturn Relay-1 FWD
How to change the serpintine belt for a Saturn relay 07
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
I agree with the other fae90. Tried to remove the light assy, then I read his post and did it inside 20 minutes. Took me longer to put it all back again
Posted on Jun 02, 2009
SOURCE: Serpintine belt replacement
There is a pulley that appears to be not operating anything. This is an idler pulley, Attach a socket to the center of the pulley, when apply pressure it will turn releasing pressure on the belt, remove belt paying attention to the route. Replace belt as it came off. You will be fine.
Posted on Jul 05, 2009
Click on the following free, direct Link. It has all the Serpentine Belt Diagrams you will need for the 1.9L 4-Cylinder Engine and various Engine Options (AC/No AC etc.), complete with Instructional and Directional Diagrams.
Let me know if this helped or if you have additional information or questions. Feel Free to contact me at FixYa.com!
Standard Rules to Removal the Serpentine Belt with an Automatic Tensioner:
1. Find the Tensioner(s). (See Diagrams on Link)
2. Using a Serpentine Belt Tensioner Tool, Or Wrench OR Ratchet, Rotate/Move the Tensioner USING THE AVAILABLE NUT (on the Pulley or Arm Base) OR the OPENING (3/8ths or 1/2 inch square opening) rotating the Tensioner Pulley/Arm - moving it away from contact with the belt and towards the area where the belt is not in contact with the Tensioner Pulley. The Tensioner is spring loaded, and is hard to rotate/move.
3. Remove the loosened belt off one of the other more easily accessed Pulleys.
4. DO NOT quickly release the Tensioner, but gently allow the Tensioner to rest in its closed position.
Standard Rules for Installing the Serpentine Belt with an Automatic Tensioner:
a. Pick a Pulley that is most easily accessed. This will usually be on top. This will be the last Pulley that the belt will go on.
b. Using the Diagram: Install the new Serpentine Belt on the remainder of the Pulleys....over, under, left right.
c. Using a Serpentine Belt Tensioner Tool or Wrench or Ratchet Tool: Rotate/Move the Tensioner Pulley/Arm "away" from Belt contact area on the Tensioner. This spring is pretty hard and with a new belt, it will be even harder to install. Rotate/Move this to as-close to the maximum allowed inorder to have enough slack in the belt to get it up and over the last pulley.
d. Using your other hand - Pull the Belt up and over the Last remaining Pulley.
e. Before releasing the pressure on the Tensioner, visually inspect the remainder Pulleys and the Belts' Positioning on them.
Posted on Apr 05, 2010
Tips for a great answer:
Oct 23, 2016 | 2007 Saturn Relay
Dec 10, 2015 | Saturn Cars & Trucks
Dec 16, 2014 | 2007 Saturn Vue
Jan 29, 2011 | 1997 Saturn SL
May 25, 2010 | 2007 Saturn Outlook
Dec 16, 2009 | 2007 Saturn Aura XR Sedan
Dec 01, 2009 | 2007 Saturn Aura XR Sedan
Sep 13, 2009 | 2007 Kia Optima
Jul 05, 2009 | Saturn SC1 Cars & Trucks
40 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: