Question about 2005 Hyundai Santa Fe GLS

Open Question

Steps to replace faulty cruise control switch pack on hyundai santa fe 2005

Cruise control doesn't work on my car but when i press the cruise button i can see the light that cruise is turned on but when i click to set it doesn't work but i can hear the click nosie.

Posted by on

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 67 Answers

SOURCE: cruise control not engaging

replace cruise set switch on steering wheel removes with 2 philips screws.

Posted on Feb 09, 2009

ghost4548
  • 776 Answers

SOURCE: Cruise light turns on but set light does not

Sure enough babe! Often the problem is in the CONTROL BUTTONS (those on the steering wheel)... Yet again, I've see the problem point to the Cruise Control Module (Under the hood). Since you mentioned the 'CRUISE' light comes ON, but nothing else is working, I'd hazard a guess the control buttons are malfunctioning. If you press them REAL HARD, do they work? Otherwise, Take the vehicle into a Hyundai Service Center (dealership), pay the diagnostic fee. They will tell you EXACTLY what the problem is and what's needed to fix it (parts, labor, tax, time-frame, etc.).

Posted on Jun 14, 2009

  • 1 Answer

SOURCE: how to replace the hyundai santa fe air

Hyundai said the dash needs to come out to replace the evaporator but I have been told by 2 others it can be done by removing the glove box and getting to it from there, and mine was done this way.

Posted on Jun 23, 2010

  • 3 Answers

SOURCE: I have a 2006 Hyundai Santa Fe that we just

a:2005 santafe: after searching internet besides the tail lite filaments as cause for malfunction of cruise control (cruise lite on but cannot set/or accelerate. I read a post by a Hyundai service tec that said every third santafe with that prob the switch on steering was faulty.
Two phillips screws removes the switch unit and unplug is easy from harness. There are two printed circuit boards that are perpendicular to each other and are electrically joined by four (4) soldered pins from one board to the other....a gentile wiggle of that joint revealed that the solder joints were broken on one or two of the four...... with a FINE solder tip you can re-solder those loose joints being very careful NOT to bridge one pin to another......repair 100%

Posted on Feb 01, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

After having my 2006 santa fe serviced at 60000 miles, my cruise control doesn't work. I had it lubed, radiator flush, oil change, brakes checked, timing belt replaced, water pump replaced.


Try checking all of your rear brake lights to see if they are working.If you have a burned out bulb the control cannot complete the circuit and the cruise will not work. Dont forget the third brake light sometimes have more than one bulb in them so check closely to make sure that all bulbs are good.

Jun 11, 2011 | 2006 Hyundai Santa Fe

1 Answer

I have a 2007 santa fe and my cruise control doesnt work. all of the fuses are ok and the light still doesnt illuminate when i press the on/off button.


Common issue w/cruise - the control switch, secondly, Cruise Control Module under the hood.
before you start replacing components, take your vehicle into an authorized Hyundai dealership (pay the diagnostic fee), and find out exactly where the cause of the problem exits... it might simply be an 'unplugged' harness connector.

Nov 10, 2010 | Hyundai Santa Fe Cars & Trucks

1 Answer

Cruise control will not engage. Just stopped


check your fueses first, is the check engine light on, if it is it might give u a code?

Jun 07, 2010 | 2004 Hyundai Santa Fe

1 Answer

Cruise control not working. The light goes on when the button is pressed but the cruise control won't engage.


could have a faulty shut of switch, i.e. brake light switch, cruise off switch, etc...

Apr 26, 2010 | 2005 Hyundai Sonata

3 Answers

I have a 2006 Hyundai Santa Fe that we just purchased. The cruise control light comes on but when we try to set the speed it won't engage.


Easiest way to check the brake switch is to have one person step on the brake pedal, and another get behind the truck to see if the brake lights come on.  If the brake switch is good, you may need to have the truck checked out at the dealer.  Yes, we love Hyundai.  We've had 2 Elantra's and my wife has a Tucson.  

Jul 24, 2009 | 2006 Hyundai Santa Fe

2 Answers

Cruise control wont engage it was intermittant for a while, now when i press the button - nothing


dear friend-it can be that the contacts is coroded.next step is to get to them.you need to remove the airbag. but first disconnect the battery.now remove the airbag(bolts is on the side.strip to get to the contacts.spray with contact cleaner and re-assemble

Jul 03, 2009 | 2003 Hyundai Santa Fe

1 Answer

Cruise light turns on but set light does not


Sure enough babe! Often the problem is in the CONTROL BUTTONS (those on the steering wheel)... Yet again, I've see the problem point to the Cruise Control Module (Under the hood). Since you mentioned the 'CRUISE' light comes ON, but nothing else is working, I'd hazard a guess the control buttons are malfunctioning. If you press them REAL HARD, do they work? Otherwise, Take the vehicle into a Hyundai Service Center (dealership), pay the diagnostic fee. They will tell you EXACTLY what the problem is and what's needed to fix it (parts, labor, tax, time-frame, etc.).

Jun 13, 2009 | 2006 Hyundai Santa Fe

3 Answers

Cruise control not engaging


replace cruise set switch on steering wheel removes with 2 philips screws.

Feb 01, 2009 | 2003 Hyundai Santa Fe

3 Answers

Cruise control stopped working in my 2004 Hyundai Sonata


This works...the cruise is directly tied to the brake lights...when I replaced the brake and side light bulbs on my 2004 Santa Fe,,,the cruise started working with no other adjustments. It must complete a circuit or something.

Sep 11, 2008 | Hyundai Motor 2004 Sonata

Not finding what you are looking for?
2005 Hyundai Santa Fe GLS Logo

Related Topics:

144 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

75744 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8123 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...