Question about 1996 Jaguar Vanden Plas

Open Question

I need to program my key fob for my 1996 Jag vandan plas, How

The old fob stopped working, car had set a long time and battery was dead a long time

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
raygin
  • 322 Answers

SOURCE: How do I program S Type Jaguar key fob Year 2000 Jag ?

Seperate key fobs only can be programmed in the following way.

Turn ignition on/off 8 x times (allow all functions to stabilise) after the 9th on - press a button on both remote fobs. then turn ign. off. use good remote to lock and then try new remote to unlock/lock. sometimes it works first time - sometimes you have to repeat actions. good luck.

Posted on Apr 07, 2009

Ad
raygin
  • 322 Answers

SOURCE: Jag S-Type -intermitent fault where the remote fob does not work

This does not sound like a fob fault - but a locking control module fault , either in the hardware or software of the unit. Get it checked at a Jaguar dealers. When unlocking using the key - as soon as the door is opened you should hear a chime sounding inside the car - this is a timer counting down to sounding the alarm. If you put your key in the ignition as soon as you open the door the alarm should not go off and the chime should stop. If it does not this again points to a fault in the locking controller.
hope this helps - good luck.

Posted on Jul 08, 2009

SOURCE: key fob 2001 jag s-type stopped working. not battery

Your car has a module for the FOB , that could need to be replaced and programmed , or just to reprogram keys again

Posted on Aug 13, 2009

raygin
  • 322 Answers

SOURCE: How do I programme a Jaguar s type key fob

This works on older style fobs not sure for 2005 switch-blade types. Make sure you have one good working fob. Turn ignition on - off 8 x times (not too fast) after the 9th on - press a button on both fobs simultaneously then turn ign. off and lock with original fob and try new fob to unlock. sometimes this works first time - sometimes it takes a few tries. Hope this helps - good luck.

Posted on Mar 22, 2010

  • 1 Answer

SOURCE: car key fob not working and locking car

i have a rover 25 and the key fob is not opening the car i could use the key to open it but the alarm will go off and cant stop it without the fob...

Posted on Apr 11, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Can I program the car to recognixe the key fob.


1996 Roadmaster

  1. Locate the programming connector located in the LH trunk. Trim may have to be pulled back to access programming connector. ( Connector has black/white wires leading up to it and it is not connected to anything.)
  2. Jump programming connector terminals. Leave terminals jumped unitl step 6.
  3. System should now lock and unlock doors to indicate programming mode has been entered.
  4. Press any button on keyless remote once. System should now lock and unlock doors, indicating successful programming of keyless remote.
  5. Repeat step 4 for additional remote or other existing keyless remote. NOTE: A maximum of only two Keyless Remotes can be programmed.
  6. Remove programming connector jumper wire to exit programming mode.
  7. Test remote(s).

Oct 19, 2015 | 1996 Buick Roadmaster

1 Answer

4x4 diesel. Why can't doors be unlocked or locked?


their is a way to do it but recheck battery first sometimes the relearn process doesnt work or the fob itself is dead also if auto /remote start will need dealer to flash fob ---- 2002 santa fe and followed programming instructions and eventually was able to program the new remote. But, I did not realize I had to program my existing remote at the same time. Since, I have retried programming both remotes many times with no success--the new one works, but the old one won't. The instructions were: 1) Locate switch under dash, behind fuse box; 2) Turn ignition switch on, but don't start engine; 3) Wait 5 seconds, set memory switch to SET position; 4) Press remote LOCK button; press second remote transmitter LOCK button; 5) Set memory switch to OFF; 6) Switch ignition OFF. 7) Confirm programming by locking and unlocking vehicle.
Remote Key Programming Hyundai Forums Hyundai Forum

Sep 23, 2015 | 2003 Hyundai Santa Fe

1 Answer

Key fob programming


generally only can be programmed by main dealer

Mar 26, 2014 | 1996 Jaguar Vanden Plas

1 Answer

Jaguar S type key fob needs reprogramming


it needs programming using suitable diagnostic equipment using jag software i.e. jaguar wds. or ids.i don't think there is another way to do it.

Feb 15, 2014 | Jaguar S-Type Cars & Trucks

1 Answer

1996 dodge grand caravan le key fob doesn't work, batteries are good. Can I need to sync it or reset it?


I put a new battery in the key fob for a 2008 Dodge Grand Caravan, and, at first, it still didn't work. Took it to the Dodge Dealer, who said the fob was dead. NOT SO! My husband put a little piece of cardboard on top of the battery so the battery contact was improved, and the fob works fine now.

Aug 04, 2010 | 1996 Dodge Caravan

1 Answer

Key fob 2001 jag s-type stopped working. not battery


Your car has a module for the FOB , that could need to be replaced and programmed , or just to reprogram keys again

Jun 21, 2009 | 2001 Jaguar S-Type

4 Answers

2003 Jaguar S-Type, programming a key fob


The switchblade key would need to be compatable with your ignition switch barrel. Only normally available from jag dealers who check the Jag owners register before supplying you a replacement.
The older type seperate fobs could be programmed by switching the ignition on and off 8 times (allowing all functions to settle) and on the 9th switch on - press a button on each fob and then switch off. to test use a good fob to lock the car then try the reprogammed fob to unlock/lock. Sometimes this works first time - sometimes needs a couple of tries.

Mar 21, 2009 | 2003 Jaguar S-Type

3 Answers

How do I program S Type Jaguar key fob Year 2000 Jag ?


Seperate key fobs only can be programmed in the following way.

Turn ignition on/off 8 x times (allow all functions to stabilise) after the 9th on - press a button on both remote fobs. then turn ign. off. use good remote to lock and then try new remote to unlock/lock. sometimes it works first time - sometimes you have to repeat actions. good luck.

Dec 28, 2008 | 2000 Jaguar S-Type

1 Answer

2007 Jaguar VDP


Hey John,

This is very common, because your battery is dead your remote isnt going to work. So what you have to do is look by the license plate light bulbs, their is a key hole wear you can insert you key and open the trunk to charge/ or jump start your battery

May 26, 2008 | 2007 Jaguar XJ Vanden Plas Sedan

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

30 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jaguar Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

yadayada
yadayada

Level 3 Expert

76846 Answers

SPEEDY CAR WORK SHOP...

Level 2 Expert

489 Answers

Are you a Jaguar Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...