Question about 2008 Geely CK 1.3
Posted by Anonymous on
Tips for a great answer:
Jul 05, 2011 | 2005 Chevrolet Impala
on Dec 18, 2009 | Honda Civic Cars & Trucks
Identify the blown bulb. Note that if a headlight bulb has blown, the dip beam is on the outside and the high beam is on the inside. Turn off the ignition switch and light switches.
Open the hood and replace any blown headlight bulbs. Press the plastic spring clips and remove the bulb holder from the assembly. Pull the bulb out of the bulb holder and replace it with a new bulb. It only fits one way. Be sure not to touch the bulb's glass. Replace any parking lights at the same time, they are in the headlamp unit too.
May 21, 2011 | 1995 Jaguar XJ6
Feb 19, 2011 | 2002 Volkswagen Passat
Jan 23, 2011 | 2001 Chevrolet Blazer
process for replacing tail light bulbs is the same in all models. If
you have a burnt-out tail light bulb, you may need to replace the
brake light, the reverse light or the turn signal. The procedure to
replace each of the bulbs is the same.
1. Open the Hummer's rear swing gate. This will expose the edge of the vehicle's tail light assembly. You'll see two small Phillips head screws that hold the tail light assembly in place. Put on your gloves.
Remove the two screws from the tail light assembly. Pull the tail
light out and inspect the back for two bulbs. The top bulb is the
brake light and turn signal. The bottom bulb is the reverse bulb.
Determine which bulb you need to replace.
the tail light into its cradle. Hold it with one hand and replace
the Phillips head screws with the other.
Dec 03, 2010 | 2008 Hummer H3
Sep 23, 2010 | 1988 Nissan Pathfinder
Apr 30, 2010 | 2000 Pontiac Montana
Jun 14, 2009 | 1992 Acura Vigor
Oct 02, 2008 | 2003 Chevrolet Tracker
22 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: