Question about 1996 Mercury Mystique

Open Question

How to change hose from waterpump (top)

It gose from waterpump to motor

Posted by Anonymous on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

99 grand am no heat, but it's not overheating


How about the heater core hoses - are they hot when engine is warm? If they are, the problem is probably the air mix door actuator in the HVAC box. If they aren't, the water pump is not doing it's job or you have a plugged line.

Apr 16, 2017 | 1999 Pontiac Grand Am GT

1 Answer

Cant find where the thermaste gose


The thermostat in your car is behind the waterpump. Take off the belt and waterpump and it should slide right out.

Dec 08, 2012 | Cars & Trucks

1 Answer

1995 acura integra waterpump location how much to changh live in md


For shop charges labor hourly rate the rate for a water pump on your vehicle is 2.1 hrly rate,standard is 4.2 hrly rate, this waterpump is part of the timing belt and while they are in there you or they should suggest camsaft seal and crank shaft seal with a new valve cover gasket

Mar 06, 2012 | Acura Integra Cars & Trucks

1 Answer

Bottom radiator hose leaking on waterpump housing on nipple


Change the hose it might be perished and the hose clip. The waterpump may have corrosion on the hose fitting. If so check your antifreeze.

Aug 14, 2011 | 2000 Dodge Caravan

1 Answer

Overheating changed thermostat done bleeding new coolant new hoses still overheats waterpump is good no blockage


if you've flushed the system, and made all those changes, ( be sure the thermostat is placed spring towards the motor) you may have a head gasket or warped head issue

Jul 13, 2011 | 2001 Pontiac Grand Prix

1 Answer

I busted my heater hoses fitting, the one behind the waterpump, and i cant get to it. I've taken the waterpump off. what else do I need to remove to get to it or where can I find a diagram


One heater hose runs to the top of the water pump the other one runs to the thermostat housing so I don't understand. If you took the water pump off you should have a tube like stem coming out of the top of the water pump, the heater hose connects to that.

Nov 05, 2010 | 1999 Chevrolet Camaro

1 Answer

Where do i find the waterpump and thermostat? and


Hi,
The water pump can be located by following your bottom radiator hose to the engine... it connects to the pump.
The thermostat is done the same way by the top radiator hose. The hose attaches to the small housing for the thermostat (usually on top of the engine).
I hope this helps you. Good luck!

Jul 09, 2010 | 2000 Chevrolet Cavalier

1 Answer

2000 5.2 changed top radiater hose. can not get water flow. how do I get water flow?


was it flowing before you changed hose, if so it sounds like the thermostat is faulty not opening up to let the water circulate. also check and make sure waterpump is working.

Aug 29, 2009 | 1999 Dodge Durango

1 Answer

How to replace hose coming off top of waterpump on a 1996 jeep v8


there should be clamps on both ends of the hose. just take off the clamps and twist the hose off and replace it. make sure car is cooled down, coolant can be very hot. like most cars, it might be very hard to get at the clamps , so be patient. good luck

Nov 29, 2008 | 1999 Jeep Grand Cherokee

Not finding what you are looking for?
1996 Mercury Mystique Logo

Related Topics:

12 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercury Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

fordexpert

Level 3 Expert

5481 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Are you a Mercury Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...