- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
there are "no user serviceable parts" inside so the answer is buy a new unit.OR transfer all your music to mp3 then use an fm transmiter to play through your fm radio.or you mums or your sisters cars......or even the car behind(if he tunes his radio into your frequency...)the good thing is no more searching for the right cd....did it for my car and got 60 hours of music in a box the size of a credit card...
I assume you mean radio, we have not way to access previous post that u may have read, so in short always post the problem, as far as the code goes you must remove the radio and record the serial number on the radio, then the dealer can look up the code with that number and your vans Vehcile ID number.
this generally means the laser is either dirty or the cd player is shot, err 01 is a disc reading problem. Try cleaning lens with cleaning disc first if this does not help i would replace the unit with another. i would recommend replacing it with a cheap aftermarket stereo.
you have the unlock code or the gm code? here is how to enter your code
press the hour set button on your radio until you get the first two numbers of the code, then press the minute set button until you've entered the last two numbers. Immediately press the AM/FM button once the correct code is entered and the code SEC or "secured" will be displayed on the display screen. Now, just turn the radio on, and your ready to roll. There is an additional step you can take to remove all codes from the radio and start from scratch by entering your own personalized 4 digit code so that it won't get you in a pickle again! Just repeat step 4 and you should get a display screen that reads ---. This means the code is out, and you can now program your own code. Of course, once you receive
let the car run for fourty five minutes to an hour with the radio turned on. after that time turn the radio off press and hold presets 5 and 6 for about ten seconds then use the seek and tune buttons to put in your code. what was your code that you are entering is it your personal code or a default dealer code. your radio should display 1n0p is this right?