Question about 2000 Jaguar S-Type

1 Answer

2000 jaguar s type windshield wiper reservoir tank leaking how do you replace it

How do you replace the tank?

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Jaguar Expert
  • 322 Answers

The tank is under the front wheel arch. The best way is to remove wheel and splash guards and you will be able to access the tank from the engine bay and the wheel arch. Check first that the leak is not from where the pipe connects to the screen wash pump or the grommet that holds the pump in place in the tank. these would seem more likely than a split tank. The pump justs twists out of the grommet - its tight but not impossible to remove and replace if the pump has a fault on its body or pipe cionnections.
Hope this helps. good luck.

Posted on Mar 27, 2014

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

SOURCE: we don't know how to turn on the windshield wipers

If you look at the Windsheild arm , you should find it written AUTO , just flip to the regular set up

Posted on Aug 13, 2009

raygin
  • 322 Answers

SOURCE: how to replace wiper blades on 2001 jaguar s-type

I change mine with the bonnet open - this just allows enough room to lift the blades enough to push the clips loose to release the blade carriers.

hope this helps - good luck.

Posted on Sep 24, 2009

michigan man
  • 3533 Answers

SOURCE: Jaguar 2000 S type. Traction control fault light

the little teeth on the front axles maybe hanging up give these websites a try www.autozone.com and www.alldatadiy.com if all fails stop by your local Jaguar dealership in the parts department and they can print you out pictures and diagrams wish you the best Michigan Man.

Posted on Nov 07, 2009

  • 56 Answers

SOURCE: On the 2000 jaguar s-type, what is, Cats system

Cats was a optional extra from the factory. It is adaptive damping. It basicialy softens or stiffens the shock absorbers to your driving style.

It may seem that one of your shock absorbers has developed a internal pressure fault. A local garage with a code reader can tell you wich shock absorber to check. Would be worth checking the electrical connectors that plug into the top of the shock absorber to make sure they are not damaged.

Look's like you may need a new shock absorber

Posted on Mar 06, 2010

  • 14036 Answers

SOURCE: Windshield Wiper motor or relay switch repair.

SOUND LIKE A BAD WIPER RELAY.CHECK IN YOUR OWNERS CAR MANUAL IN GLOVE COMPARTMENT IT HAS FUSES AND RELAY LOCATIONS AND THE CIRCUIT EACH CONTROLS.

Posted on Jun 18, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do you replace the windshield wiper pump


Owner's manuals are not intended to assist in this type of repair. You need a shop manual, and even they may not cover this part. I don't know your mitsu, but in general two types of pumps are used. One type mounts to the bottom of the fluid reservoir, while the other is mounted to the wiper motor. Most aftermarket replacements come with instructions, but if you have bought an OEM part guess it did not. If the pump is on bottom of tank, remove the tank and it should be simple to replace. If made onto the wiper motor, these can be a bit tricky. If that is the case, you may want to have the dealer install the part.

Dec 29, 2014 | Mitsubishi Mighty Max Cars & Trucks

1 Answer

My windshield wiper fluid will not go thru to windshield,how can i fix the problem


Your line runs from the reservoir in the fender well, up through the hose around the strut plate on top, through the bezel to the wipers. If you have no leaks, Replace the washer motor. If you fill it and it leaks, fix the leaks. To access the reservoir. Remove the tire and inner fender well on the passenger side.

Oct 05, 2014 | 2007 Chevrolet Impala LS Sedan New Cars

2 Answers

Windshield washer fluid quit working on my 2011 Freightliner Cascadia


There's a few things you might want to check. First, check to make sure the washer fluid reservoir is completely (assuming you hadn't already done that). After you are certain the reservoir is full, look for any possible leaks...either the reservoir or the hoses going from the tank to the windshield. If the tank and hoses are intact, turn on your windshield wipers...then try running the pump. If no washer fluid comes out, and for this you might need another person to assist you, try running the pump again...listening to make sure the pump is in fact running. If the pump does run but still no fluid comes out, inspect all of the hoses as well as all of the outlets where the fluid sprays the windshield...it is possible that the outlets may be plugged. Some common reasons for the outlets to be plugged...debris, dirt/mud, and/or wax (has anyone recently waxed your Freightliner?). Just to be sure, using a small needle or even a wire, ensure each outlet is cleared and not obstructed with anything. After that, try running the pump again. If no luck, try removing the hoses going from the tank to the windshield. Once removed, using something like a wire coat hanger, clear each hose for any possible obstruction. Reattach hoses and try running pump again. If still no luck, I would guess the problem might be located with the washer pump itself. Before opting to replace the pump, if you believe that is the problem and the pump just doesn't operate, check all fuses and inspect any/all wiring connections.

Good luck
Jason

Jun 24, 2014 | Cars & Trucks

1 Answer

Windshield wiper fluid runs straight out of the reservoir. How do I fix this issue by myself?


Find out where its leaking from. A broken hose or a cracked tank. Find the leak and fix the leak. Have someone spray the washers as you look for the leak. Should be easy to spot and then repair....If it a cracked and leaking tank ....replace the tank???

Jul 16, 2011 | 1993 Honda Accord

1 Answer

2002 jaguar x-type windshield wipers rest in the middle of the windshield


i try this before, you can try this,you need to remove the negative battery for 5minutes and return, and try to use the wiper again, if still does not work, check your fuse/relay for the wiper.

Feb 05, 2011 | Jaguar X-Type Cars & Trucks

1 Answer

Washer fluid tank full, fluid coming out but trickling and not getting on windshield


Make sure the fluid is of the -20 deg. F or below type and not the 32 deg. F summer formula. It's common for summer formula to remain in the tanks of windshield wiper cleaning fluid and freeze up in the winter months.

Good luck on changing out the fluid in your reservoir.

Dec 18, 2010 | Pontiac Torrent Cars & Trucks

1 Answer

Windshield wipers quit working on my 2002 x-type Jaguar


Check the fuse and if it's ok, then the windshield wiper motor may be bad.

Nov 09, 2010 | 2002 Jaguar X-Type

2 Answers

How do I fix my window washer pump on my 2000 dodge caravan?


One can get a repair kit that includes a new motor pump and wiring clips, or

one can get the original motor that plugs into the windshield wiper fluid reservoir.

---
Windshield wiper reservoir (gives idea of how to change the windshield wiper fluid pump motor) Removal & Installation To Remove:
  1. Disconnect and isolate the negative battery cable.
  2. Raise and safely support the vehicle.
  3. Remove the right front wheel and splash shield.
  4. Disconnect the electrical connectors from the pumps and detach the rear washer hose.
  5. Place a drain pan under the reservoir if it contains fluid.
  6. Disconnect the front washer hose at the wiper unit in the engine compartment. NOTE: The front hose will be removed with the reservoir.
  7. Let the fluid drain from the reservoir.
  8. Remove the mounting screws and the reservoir.
To Install:
  1. Install the fluid reservoir with the mounting screws.
  2. Connect the front washer hose in the engine compartment.
  3. Connect the electrical connectors and rear washer hose.
  4. Install the splash shield.
  5. Install the right front wheel.
  6. Lower the vehicle.
prev.gif next.gif

Aug 27, 2010 | 2000 Dodge Caravan

1 Answer

What is included in the 90000 mile service for a 2000 S-type Jaguar?


Depending if you kept up with recommended maintenance as per factory. If you did this is what the factory sheet suggests for 90000 Miles checkup :
Diagnose / Test Vehicle : verify parking brake operation
Inspect : Battery Brake fluid Brake pad Coolent Drive belt Fluids Power steering fluid Tires Windshield Washer Reservoir
Replace : Air filter element Cabin air filter Engine oil and sump washer Engine oil filter Wiper blades

Sep 11, 2009 | 2000 Jaguar S-Type

2 Answers

Wiper fluid level sensor replacement


Reservoir —Windshield Wiper

Removal
  1. Remove the RH wheel; refer to Section 204-04 .
  1. Position RH splash shield aside.
    1. Remove six screws.
    1. Remove three pin-type retainers.
    1. Position RH splash shield aside.
  1. NOTE: Windshield washer fluid should be collected in a container after the windshield washer hoses are disconnected.
    Disconnect the electrical connector and washer hoses.
  1. Remove the upper reservoir bolt.
  1. Remove the windshield washer reservoir.
    • Loosen the two lower reservoir bolts.
------------------------------------------------------------------------------------

Jan 15, 2009 | 2000 Mercury Villager

Not finding what you are looking for?
2000 Jaguar S-Type Logo

76 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jaguar Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

yadayada
yadayada

Level 3 Expert

76164 Answers

SPEEDY CAR WORK SHOP...

Level 2 Expert

489 Answers

Are you a Jaguar Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...