Question about Ford F-150

1 Answer

My ford 150 1998 won't start only makes clicking noise

I've replaced starter and ignition coil

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 9 Answers

Check wire connections and starter solenoid.

Posted on Aug 10, 2014

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

SOURCE: wont start

If the solenoid makes a clicking sound it isn't the ignition switch. Depends on the clicking sound, one click or rattling. Try turning on lights and trying to start, if lights go out when attempting to start, voltage problem(usually battery or bad connections).

Posted on Nov 03, 2008

shop242
  • 214 Answers

SOURCE: 1998 astro van, makes fast clicking noise won't start

Triple check your battery cables on the battery end .. esp the positive + side.. Side post batteries are notorius for that

Posted on Mar 08, 2009

  • 10 Answers

SOURCE: ignition wont turn over just makes noise

probably a bad battery. have it charged and tested with a load tester. some places don't charge for this because they hope to sell a new battery if needed

Posted on Apr 23, 2009

  • 1403 Answers

SOURCE: I have replaced the starter o my 95 VW Jetta 2.0L

check starter relay @ look for burnt fusable links around starter area also check starter connections on starter.

Posted on Aug 15, 2010

  • 1 Answer

SOURCE: 1995 TERCEL WONT START

My tercel keeps ticking when I try to start it.. Could it be the starter??

Posted on Dec 17, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I replaced starter on 1989 f150 5.0 now have no spark


Mike, Check for diagnostic codes. Check fuses/relays,wires/plugs for pinched,damage or corrosion. Could be a lot of things like distributor armature, cap, rotor, stator, ICM, coil,spark plugs,wires, make sure ground is good to distributor. Use the attached forum links,instruction, guides to help diagnose ignition spark problems, Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
No spark replaced all ignition parts 1990 F150 Ford F150 Forum Community...
Engine Spins but No Start No Spark
Engine Won Start No Spark
Code Reader 80 96 Ford Bronco
Resolved 89 Ford F150 302 Won Start HELP

Jun 24, 2016 | Cars & Trucks

1 Answer

Santa fe 2007 wont start makes a single click noise


May be ab bad starter solenoid, or corroded/loose connection at starter, or (ground). Could also be a bad ignition switch. Start from the load; the starter. Test for 12V at starter, OK. Connect short wire from starter and touch sylenoid connection..

Nov 09, 2013 | 2003 Hyundai Santa Fe

1 Answer

I have a 2000 Ford Taurus. My wife left the radio running with the ignition off for a short while. Now the car won't turn over, won't start, won't jump. There is one click when trying to s


The click you are hearing is most likely the start slenoid making contact, however you should short the large wires @ the solenoid to make certain the starter still doesn't run, if so try tapping the starter with a hammer to shift the comutator a litle and try to start. Even if it now starts the starter will continue to give you problems so the proper fix is change the starter

Sep 22, 2012 | 2000 Ford Taurus

1 Answer

Ford contour wont start


You need answer some questions first to rule some things out.
Is the starter making a noise when you turn the key or is it just clicking? If the lights light, but the starter makes absolutely no noise, then the power cable to the starter is bad or contacts are corroded. If you hear a click every time you turn the key but that is all, then the starter is bad and needs replace. Once it is removed, most parts stores can test it for you. If you can hear the starter spinning but its going real fast then again the starter is bad. If the starter is working properly (like on a really cold day when it doesn't start right away) but the car still won't start, then the starter is fine and your problem is either in the ignition or the fuel system. You may be able to narrow it down if you can read the codes, otherwise it needs a mechanic and you need to decide what is the car worth to you.

Sep 17, 2012 | 1998 Ford Contour

1 Answer

We've replaced fly wheel, and now the starter and the battery and the truck still won't start and nothing works.


are you sure with parts are the same as the old ones ? If so start again as you started the fitting in order to be sure that everything is in order. I believe either you haven't put the contact ( earth ) or you didn't tight it enough.

Sep 01, 2012 | 2006 Ford F-150

1 Answer

My 2007 corolla won't start. When I turn the key in the ignition the starter makes a rapid clicking noise. I?ve tried putting the car in neutral and starting it that way, but had no luck. I?ve also tried...


1st check the main cable to the starter make sure it is clean and tight, disconnect battery first, after that there should be a small wire going to the starter jump that small connector to the main battery cable on the starter (IGNITION OFF) if it cranks you have a wiring or ignition switch problem if not Starter time just make sure you get a very good quality starter some cheap and even lifetime starters are so poorly made that even after you replace them you still have a problem only a bad noise coming from the new starter you just put in.

Oct 14, 2010 | Toyota Corolla Cars & Trucks

2 Answers

Wont start


is the earth cable giving a good engine and body contact.does your starter have two terminals and if so are they the right way around?is the battery any good?Is the engine able to be turned over by hand Make sure you have agood 12v supply to the starter solenoid when cranking the engine An engine test probe/light would be of a lot of use for you to do that test

Oct 07, 2008 | 1993 Ford Escort 4 Door

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

24 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5470 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...